Sigma 2-6E Bedienungsanleitung

Version 04/2008, Rev. 1.18 of 07/06/2012

Translation of the original operating manual

Formatiert: Englisch (Großbritannien)

Operating Manual

Centrifuge

2-6E

from serial no. 124764

Please retain for later use!

Version 04/2008, Rev. 1.18 of 07/06/2012 page 3 of 65

Translation of the original operating manual

In case of inquiries please state the following number:

Serial number:

Copyright by

Sigma Laborzentrifugen GmbH

An der Unteren Söse 50

37520 Osterode am Harz

Germany

Phone +49 (0) 55 22 / 50 07-0

Fax +49 (0) 55 22 / 50 07-12

E-mail: info@sigma-zentrifugen.de

For service

please use our service request form on our website:

www.sigma-zentrifugen.de →[Service Area]

or contact:

Phone +49 (0) 55 22 / 50 07-84 25

Fax +49 (0) 55 22 / 50 07-94 25

E-mail: service@sigma-zentrifugen.de

Version 04/2008, Rev. 1.18 of 07/06/2012 page 7 of 65

Translation of the original operating manual

Table of Contents

1General Information 11

1.1 Importance of the Operating Manual 11

1.2 Intended Use 11

1.3 Technical Data 12

1.3.1 Ambient Temperature 12

1.4 Scope of Supply 13

1.5 Standards and Regulations 13

2Safety Instructions and Hazard Warnings 14

2.1 Symbols used in the Safety Instructions 14

2.2 Symbols used in the Operating Manual 15

2.3 Informal Notes on Safety 15

2.4 Safety Instructions for Centrifugation 16

2.4.1 Special Instructions 16

2.4.2 Resistance of Plastics 17

2.5 Prohibited Centrifuging Operations and Hazard Warnings 17

2.5.1 Special Hazards 18

2.6 Checks by the Operator 19

2.7 Instructions for Emergency Situations 19

2.8 Remaining Hazards 19

3Transport and Storage 20

3.1 Dimensions and Weight 20

3.2 Notes on Transport 20

3.3 Notes on Storage 20

4Set-up and Connection 21

4.1 Unpacking the Centrifuge 21

4.1.1 Transport Safety Device 21

4.2 Installation 22

4.2.1 Installation Site 22

4.2.2 Connection 22

4.2.3 Fuses 22

Version 04/2008, Rev. 1.18 of 07/06/2012 page 8 of 65

Translation of the original operating manual

5Using the Centrifuge 23

5.1 Description 23

5.1.1 Operating Elements 23

5.1.1.1 Operating Panel 24

5.1.1.2 Name Plate 24

5.1.2 Construction and Constructive Safety Measures 25

5.1.3 Drive 25

5.1.4 Operation and Display 25

5.1.5 Electronic System 25

5.1.6 Safety Devices 26

5.1.6.1 Lid Lock and Lid Closing Device 26

5.1.6.2 Standstill Monitoring 26

5.1.6.3 System Check 26

5.1.6.4 Ground Wire Check 26

5.2 Initial Start-Up 27

5.2.1 Switching the Centrifuge ON 27

5.2.2 Opening and Closing the Lid 27

5.2.3 Installation of Rotors 28

5.2.4 Installation of Accessories 29

5.2.4.1 Carrier Systems 29

5.2.4.2 Tubes 29

5.2.5 Service Life of Rotors and Accessories 30

5.2.6 Starting the Centrifuge 31

5.2.7 Interrupting a Centrifugation Run 31

5.2.7.1 Interrupting a Deceleration Process 31

5.2.7.2 Softstart and Softstop Function 31

5.3 Display/Program Options 32

5.3.1 Time 32

5.3.1.1 Changing the Time Increments 33

5.3.1.2 Short Run 33

5.3.1.3 Continuous Run 33

5.3.2 Speed 34

5.3.2.1 Changing the Speed Increments 34

5.3.3 Relative Centrifugal Force (RCF) 35

5.3.4 Rotor 35

Version 04/2008, Rev. 1.18 of 07/06/2012 page 9 of 65

Translation of the original operating manual

5.3.5 Program 36

5.3.5.1 Saving the Current Settings 36

5.3.5.2 Calling Up Stored Programs 36

5.3.6 Lockdown 37

5.3.6.1 Permanent Lockdown 37

5.3.7 Activating/Deactivating the Automatic Lid Opening Function 37

5.3.8 Activating/Deactivating the Sound Signal 38

6Malfunctions and Error Correction 39

6.1 Error Mode 39

6.2 Error Correction 39

6.2.1 No Indication on the Display 39

6.2.2 Centrifuge cannot be started 39

6.2.3 Centrifuge decelerates during Operation 39

6.2.4 Lid cannot be opened 40

6.2.5 Emergency Lid Release 40

6.2.6 Error Codes 41

6.2.7 Service Contact 42

7Care and Maintenance 43

7.1 Cleaning and Care 43

7.1.1 Centrifuge 43

7.1.2 Accessories 44

7.1.2.1 Plastic Accessories 44

7.1.2.2 Aluminum Accessories 44

7.1.3 Rotor, Buckets, and Multiple Carriers 45

7.1.4 Load-bearing bolts 45

7.1.5 Glass Breakage 46

7.2 Sterilization and Disinfection of the Rotor Chamber and Accessories 46

7.2.1 Autoclaving 47

7.3 Service 48

7.4 Return of defective parts 49

8Disposal 50

8.1 Disposal of the Centrifuge 50

8.2 Disposal of the Packaging 50

9Warranty and Liability 50

Version 04/2008, Rev. 1.18 of 07/06/2012 page 10 of 65

Translation of the original operating manual

10 Suitable Accessories 51

10.1 Maximum speed for tubes 55

10.2 Graphical Representation of the Rotors 55

11 Appendix 56

11.1 Formulae – Mathematical Relations 56

11.1.1 Relative Centrifugal Force (RCF) 56

11.1.2 Density 56

11.1.3 Speed-Gravitational-Field-Diagram 56

11.2 Table of rotors and accessories with a different service life 58

11.3 Resistance Data 59

12 Index 63

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sigma Laborausrüstung Handbücher

Sigma

Sigma 4-5KL Bedienungsanleitung

Sigma

Sigma 3-30K Bedienungsanleitung

Sigma

Sigma 4-5KRL Bedienungsanleitung

Sigma

Sigma 6-16KS Bedienungsanleitung

Sigma

Sigma 6-16HS Bedienungsanleitung

Sigma

Sigma 2-16P Bedienungsanleitung

Sigma

Sigma 3-16L Bedienungsanleitung

Sigma

Sigma 2-16P Bedienungsanleitung

Sigma

Sigma 10164 Bedienungsanleitung

Sigma

Sigma 8KBS Bedienungsanleitung

Sigma

Sigma 3-30KHS Bedienungsanleitung

Sigma

Sigma 1-14K Bedienungsanleitung

Sigma

Sigma 8K Bedienungsanleitung

Sigma

Sigma 1-16K IVD Bedienungsanleitung

Sigma

Sigma 2-16P Bedienungsanleitung

Sigma

Sigma SPRIZZA SPZ 40 Technisches Datenblatt

Sigma

Sigma 2-7 Bedienungsanleitung

Sigma

Sigma 2-7 Bedienungsanleitung

Sigma

Sigma 6-16KHS Bedienungsanleitung

Sigma

Sigma 1-15PK Bedienungsanleitung

Sigma

Sigma 3-16K Bedienungsanleitung

Sigma

Sigma 4-16KHS Bedienungsanleitung

Sigma

Sigma 2-16KL Bedienungsanleitung

Sigma

Sigma 4-16KS Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung