SIIG Dual Profile Hi-Speed USB 4-Port PCI Bedienungsanleitung

Dual Profile Hi-Speed

USB 4-Port PCI

Quick Installation Guide

04-0469A

FeaturesandBenefits

• Compliant with USB specifications revision 2.0

• Conforms to PCI specifications revision 2.2

• Supports simultaneous operation of multiple

high-speed USB 2.0 and USB 1.1 devices

• Supports high-speed (480 Mbps), full-speed (12

Mbps), and low-speed (1.5 Mbps) data transfer

modes

• User friendly hot-swapping feature allows you to

attach/remove USB devices without turning off

your system

Note: USB1.1devicesarelimitedtoUSB1.1speeds

evenwhentheyareconnectedtoUSB2.0hostadapter

or USB 2.0 hubs.

SystemRequirements

PC:

• Pentium®-classcomputer with an available PCIslot

• Windows®2000 SP4 or later/XP SP1 or later/

Server 2003/Vista

Mac:

• Power Mac G3 (blue & white) or later with an

available PCI slot

• Mac OS 10.2.8 or later

PackageContents

•Dual Profile Hi-Speed USB 4-Port PCI

• Spare enhanced low profile bracket*

• Quick installation guide

Layout

Figure 1: Layout

Hardware Installation

* Note: For Low Profile systems, replace the currently

mounted bracket with the included Low Profile bracket.

General instructions for installing the card are provided

below. Since the design of computer cases and

motherboards vary, refer to your computer’s reference

manual for further information, if needed.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer's case for a few

seconds. Avoid any contact with internal parts and

handle card only by their external edges.

1. Turn OFF the power to your computer and any

other connected peripheral devices.

2. Unplugthepowercordandremoveyourcomputer's

cover.

Internal port

External ports

3. Remove the slot bracket from an available PCI slot.

4. Carefully align the card to the selected PCI slot,

push the board down firmly, but gently, until it is

well seated.

5. Replace the slot bracket holding screw to secure the

card.

6. Replacethecomputercoverandreconnectthepower

cord.

Windows Driver Installation

Windows 2000 Service Pack 4 or later, XP Service Pack 1

orlater,Server2003,andVistahavebuilt-indriversupport

for this controller. Just install the board and Windows

will automatically detect and install the correct drivers

for it. No additional driver is necessary.

ToVerifyWindowsInstallation

1. Right click My Computer. Then click Manage.

2. Windows 2000/XP/Server 2003: Click Device

Manager

3. Windows Vista™: Click Continue, then click

Device Manager

4. Under Universal Serial Bus controllers:

- NEC PCI to USB Open Host Controller

- Standard Enhanced PCI to USB Host

Controller

- USB 2.0 Root Hub

- USB Root Hub (3x)

Note: Windows XP will only show two USB Root

Hub.

Mac OS Driver Installation

Mac OS has built-in driver support for this controller.

Just install the board and Mac OS will automatically

detect and install the correct drivers for it. No additional

driver is necessary.

To Verify Mac OS Driver Installation

Mac OS X (v10.2.8)

The only way to verify the board works is actually

connecting devices to the USB ports.

Mac OS X (v10.3.0) or later

Check System Profiler to verify successfull installation.

Click Go, then Utilities. Double click System Profiler

Under USB

- USB High-Speed Bus

-USB Bus

- USB Bus

Blank Page

Technical Support and Warranty

QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitour

web site at www.siig.com and click Support. Our online support

databaseisupdated daily withnewdriversandsolutions. Answers

toyourquestionscouldbejustafewclicksaway. Youcanalsosubmit

questions online and a technical support analysts will promptly

respond.

SIIGoffersa5-yearmanufacturerwarrantywiththisproduct. Please

see our web site for more warranty details. If you encounter any

problemswiththis product, pleasefollowtheproceduresbelow.

A) If it is within the store's return policy period, please return the

producttothestorewhereyoupurchasedfrom.

B) Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,please

followthese steps to havetheproduct repaired or replaced.

Step1: SubmityourRMArequest.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. If the product is determined to be

defective,anRMAnumberwillbeissued. SIIGRMAdepartment

can also be reached at (510) 413-5333.

Step2: After obtaining anRMAnumber, ship theproduct.

•Properlypacktheproductforshipping. Allsoftware,cable(s)

andanyotheraccessories that camewiththeoriginalpackage

mustbeincluded.

•Clearly write your RMA number on the top of the returned

package. SIIGwillrefusetoacceptanyshippingpackage,and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•Youareresponsible for the costof shipping. Shipthe product

to the following address:

SIIG,Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA#:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

nocosttothecustomer.

Dual Profile Hi-Speed 4-Port PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered

trademarksofSIIG,Inc. MicrosoftandWindowsareregisteredtrademarksofMicrosoftCorporation.

PentiumisaregisteredtrademarkofIntelCorporation. MacandMacOSareregisteredtrademarksof

Apple Computer, Inc. Other names used in this publication are for identification only and may be

trademarksoftheirrespectivecompanies.

About SIIG, Inc.

Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer

ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel

ports,USB,SerialATA&UltraATAcontrollers,FireWire(1394a/b),

networking,soundcards,andotheraccessories. SIIG is the premier

one-stopsourceofupgrades.

SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly

features, and are backed by an extensive manufacturer warranty.

High-quality control standards are evident by the overall ease of

installation and compatibility of our products, as well as one of the

lowest defective return rates in the industry. SIIG products can be

found in computer retail stores, mail order catalogs, through major

distributors, system integrators, and VARs in the Americas and the

UK,andthroughe-commercesites.

PRODUCT NAME

Dual Profile Hi-Speed USB 4-Port PCI

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Inhaltsverzeichnis

Andere SIIG Computerhardware Handbücher

SIIG

SIIG Cyber PCI I/O Bedienungsanleitung

SIIG

SIIG FireWire Home DV Kit Bedienungsanleitung

SIIG

SIIG DP PCI-to-PS/2 Bedienungsanleitung

SIIG

SIIG SC-SAE312-S3 Bedienungsanleitung

SIIG

SIIG 104-0487A Bedienungsanleitung

SIIG

SIIG CyberParallel Dual Bedienungsanleitung

SIIG

SIIG UltraATA 100 Pro Bedienungsanleitung

SIIG

SIIG PCIe to ExpressCard Bay Bedienungsanleitung

SIIG

SIIG FireWire 800 + Hi-Speed USB Combo Bedienungsanleitung

SIIG

SIIG SC-SAE612-S1 Bedienungsanleitung

SIIG

SIIG ExpressCard 11-in-1 Reader/Writer Bedienungsanleitung

SIIG

SIIG 1394 Dual-Port CardBus Bedienungsanleitung

SIIG

SIIG Serial ATA PCI Bedienungsanleitung

SIIG

SIIG I/O Expander 2S Bedienungsanleitung

SIIG

SIIG JU-EP0012-S1 Bedienungsanleitung

SIIG

SIIG USB 2.0+1394 DV Kit Bedienungsanleitung

SIIG

SIIG AV-GM0AK3-S1 Bedienungsanleitung

SIIG

SIIG eSATA II PCIe i/e Bedienungsanleitung

SIIG

SIIG SC-SAE512-S1 Bedienungsanleitung

SIIG

SIIG JJ-PCM012-S2 Bedienungsanleitung

SIIG

SIIG SC-SB6412 Bedienungsanleitung

SIIG

SIIG Serial ATA PCI RAID Bedienungsanleitung

SIIG

SIIG SC-SAEE12-S1 Bedienungsanleitung

SIIG

SIIG CyberSerial POS 4000RJ Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung