SIIG FireWire Dual-Port CardBus Bedienungsanleitung

FireWire Dual-Port CardBus

Quick Installation Guide

04-0238F

Introducing the FireWire Dual-Port Cardbus

TheFireWire Dual-Port CardBus isdesignedtoaddFireWire

(1394a) interface to notebook computers for easy

connection to DV camcorders, hard disk drives, scanners,

printers, and other FireWire devices.

Features and Benefits

• Compliant with IEEE 1394-1995, P1394a-2000 and

OHCI 1.1 standards

• Supports serial bus data transfer rates of 100, 200

and 400 Mb/s

• Hot-swappingallowsyoutoconnect/detachdevices

without first turning your system off

• Supports both asynchronous and isochronous data

transfer modes

• Works with a variety of 1394 devices including

digital cameras, DV camcorders (Sharp, Sony,

Panasonic,JVC,Cannonandotherbrands),portable

harddisks, CD-RW/DVD-ROMs, printersandother

audio/video devices

System Requirements

• Pentium III or equivalent notebook PC with an

available CardBus Type II slot

• Windows®7 (32-/64-bit) / Vista (32-/64-bit) / XP

(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000

/ ME / 98SE

RecommendedsystemforDigitalVideocapturing/editing:

• Pentium 4 or better notebook computer

• 512MB RAM and CD-ROM drive

• 5 GB of available hard disk space

PackageContents

•FireWire Dual-Port CardBus

•Quick installation guide

Layout

Figure 1. Layout

*Note: The power adapter (not included) can be

purchased on SIIG's online store. If your FireWire

device does not come with it's own power supply,

you will need to purchase this power adapter.

1394a Ports

(6-pin)

Power Adapter Jack*

Power LED

Hardware Installation

General instructions for installing the card are provided

below. Since the design of portable computers may vary,

refer to your system's reference manual for further

information, if needed.

1. Power off your notebook computer and any other

connected peripheral devices.

2. Insert the PC Card into the CardBus Type II slot of

your PC with its 68-pin connector facing the slot.

Make sure it is inserted all the way in for a solid

connection.

3. Power on your notebook PC.

Driver Installation

This section will guide you through the installation of

your FireWire Dual-Port CardBus.

Windows 7 / Vista / XP / Server 2003 & 2008 / 2000

Windows 7, Vista , XP, Server 2003, 2008 and 2000 will

automatically detect and install the correct driver for

your FireWire Dual-Port CardBus. Restart Windows if

prompted.

Windows ME

1. At the Add New Hardware Wizard, choose

Automatic search for a better driver

(Recommended), then click Next.

2. Click Finish then restart Windows to complete the

installation.

Windows 98SE

1. At the Add New Hardware Wizard, click Next.

2. Choose Search for the best driver for your device,

and click Next.

3. Uncheck all the boxes, click Next, Next, Next.

Note: If you are prompted to insert your Windows

Installation disk, insert it and click OK.

4. Click Finish, then restart Windows to complete the

driver installation.

To Verify Driver Installation

1. Check Device Manager to verify successful driver

installation.

Windows 7: Right click Computer, click Manage.

Click Device Manager.

Windows Vista: Right click Computer, click Manage,

click Continue, then click Device Manager.

Windows XP / Server 2003 & 2008 / 2000: Right click

My Computer, then click Manage. Click Device

Manager.

Windows ME / 98SE: Right click My Computer, click

Properties. Click Device Manager tab.

2. Double click 1394 Bus Controller or IEEE 1394 Bus

host controllers option. An IEEE 1394 Host

Controller should be displayed.

Device Connection

Many FireWire devices have built-in driver support with

Windows. Please refer to the device's user manual for

detailed installation information.

Blank Page

Technical Support and Warranty

QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisitour

web site at www.siig.com and click Support. Our online support

database is updated daily with new drivers and solutions. Answers

toyour questions could be just a few clicksaway. Youcan also submit

questions online and a technical support analysts will promptly

respond.

SIIGoffers alifetime manufacturerwarranty withthis product. Please

see our web site for more warranty details. If you encounter any

problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the

product to the store where you purchased from.

B) Ifyour purchase has passed the store's return policy period, please

follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. Your RMA request will be processed, if the

product is determined to be defective, an RMA number will be

issued.

Step 2: After obtaining an RMA number, ship the product.

•Properly pack the product for shipping. All software, cable(s)

and any other accessories that came with the original package

must be included.

•Clearly write your RMA number on the top of the returned

package. SIIG will refuse to accept any shipping package, and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•You are responsible for the cost of shipping. Ship the product

to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

no cost to the customer.

FireWire Dual-Port CardBus is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered

trademarksofSIIG,Inc. MicrosoftandWindowsareregisteredtrademarksofMicrosoftCorporation.

All other names used in this publication are for identification only and may be trademarks of their

respectiveowners.

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,

and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals. SIIG continues to grow by

adding A/V and Digital Signage connectivity solutions to our extensive

portfolio. Allcentered around the distribution and switching of A/V signals

overCAT5/6,theseproductsinclude matrix switches,distributionamplifiers,

extenders, converters, splitters, cabling, and more.

SIIG is the premier one-stop source of upgrades and is committed to

providing high quality products while keeping economical and competitive

prices. High-quality control standards are evident by one of the lowest

defective return rates in the industry. Our products offer comprehensive

user manuals, user-friendly features, and most products are backed by a

lifetime warranty.

SIIG products can be found in many computer retail stores, mail order

catalogs, and e-commerce sites in the Americas, as well as through major

distributors, system integrators, and VARs.

PRODUCT NAME

FireWire Dual-Port CardBus

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

Inhaltsverzeichnis

Andere SIIG Computerhardware Handbücher

SIIG

SIIG CE-H23J11-S1 Bedienungsanleitung

SIIG

SIIG FireWire 800 + Hi-Speed USB Combo Bedienungsanleitung

SIIG

SIIG DP SoundWave 4 Channel PCI Bedienungsanleitung

SIIG

SIIG Parallel Pro Bedienungsanleitung

SIIG

SIIG SC-SAEE12-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0AK3-S1 Bedienungsanleitung

SIIG

SIIG JU-2NE012 Bedienungsanleitung

SIIG

SIIG CyberParallel ExpressCard Bedienungsanleitung

SIIG

SIIG Low Profile USB Adapter Bedienungsanleitung

SIIG

SIIG USB 2.0 Bay Reader/Writer+Floppy Bedienungsanleitung

SIIG

SIIG SC-SAE312-S3 Bedienungsanleitung

SIIG

SIIG CE-ED0011-S1 Bedienungsanleitung

SIIG

SIIG Cyber I/O PCI Bedienungsanleitung

SIIG

SIIG ID-P40411-S1 Bedienungsanleitung

SIIG

SIIG CyberSerial ExpressCard Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

SIIG

SIIG DP PCI-to-PS/2 Bedienungsanleitung

SIIG

SIIG SIIG 2-Port Serial 950-Value Bedienungsanleitung

SIIG

SIIG Single-Serial PC Card Bedienungsanleitung

SIIG

SIIG DP FireWire 800 PCIe Bedienungsanleitung

SIIG

SIIG FireWire 800 2-Port ExpressCard/34 Bedienungsanleitung

SIIG

SIIG JJ-E02211-S1 Bedienungsanleitung

SIIG

SIIG NN-PC8312-S2 Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung