SIIG 1394 3-Port Host Adapter Bedienungsanleitung

1394 3-Port Host Adapter

Quick Installation Guide

Thisquickinstallationguideprovidesinstructionsforpropersetup

of the 1394 3-port host adapter with Windows 98 and Windows 98

Second Edition (SE). Instructions include:

• Windows 98 and Windows 98SE driver installation

• Driver installation when using a DV camcorder and other

1394 devices with Windows 98

• Installation of the Ulead VideoStudio digital video editing

software (For 1394 DV-Cam Kit model only)

IMPORTANT

The 1394 3-Port Host Adapter must be installed in your

computer BEFORE proceeding with the following setup.

Verify Windows 98 Version

Before proceeding with the software setup, it is important that you

know the version of your Microsoft Windows 98 operating system.

If you are not sure, perform the following steps to confirm the

correct version.

1. From the main desktop, click the right mouse button on

My Computer, then Properties.

2. The General tab screen will display the Windows 98 version.

Windows 98/98SE Driver Installation

ThissectionwillguideyouthroughtheinstallationoftheWindows

98 and Windows 98SE drivers.

1. Turn computer ON. When Windows boots up, a New Hardware

Found dialog box should appear and the OHCI Compliant IEEE

1394 Host Controller is identified.

2. At the Add New Hardware Wizard window, click “Next”.

3. Choose “Select for the best driver for your devices”, and click

“Next”.

4. Insert the Windows 98/98SE CD-ROM and check the

"CD-ROM" option. Click “Next”.

04-0174A

5. For Windows 98: Click “Next”.

For Windows 98SE: Choose “The updated driver

(Recommended)”, and click “Next”, then “Next” again.

Note: if Windows prompts you for the Windows CD-ROM

again, type in D:\win 98 and click “OK”. (Assuming "D" is

the CD-ROM driver letter)

6. Click “Finish” to complete the installation.

To verify successful driver installation:

1. From the main desktop, double-click on My Computer,Control

Panel,System, then Device Manager.

2. Double-click on 1394 Bus Controller device option.

For Windows 98: “PCI OHCI Compliant IEEE 1394 Host

Controller” should be displayed.

For Windows 98SE: "Texas Instruments OHCI Compliant IEEE

1394 Host Controller” should be displayed.

The driver is installed. The ports are ready to connect devices.

Connecting 1394 Devices

Connecting a DV Camcorder

Before setting up a digital video camcorder, verify the version of

Windows 98 (Windows 98 or Windows 98 Second Edition) in your

system. Refer to the appropriate section for your version.

For Windows 98:

1. Before connecting your DV camcorder to the 1394 host adapter,

perform the following steps:

a. For 1394 3-Port PCI: insert the driver diskette. Go to Start,

Run,then type: "A:\DVconnect150.exe". Click "OK".

b. For 1394 DV-Cam Kit: insert the CD-ROM. Go to Start,

Run, then type: "D:\DV\DVconnect150.exe". Click "OK".

(Assuming “D” is the CD-ROM driver letter.)

2. Restart your system.

3. Connectthesmall4-pin connectorofthe1394DV cable(included

with the 1394 DV-Cam Kit model only) to the camcorder, then

power-on the camcorder.

4. Connect the other end of the cable to the 1394 host adapter.

5. The Building Driver Database dialog box should appear and the

device driver will be automatically loaded.

If the Building Driver Database dialog box does not appear:

a. Double-clickonMyComputer,ControlPanel,System,Device

Manager,then 1394 Bus Controller device options.

b. Highlight “OHCI Compliant IEEE 1394 Host Controller”

and click on Properties, then Settings.

c. Check the“SupportNon-CompliantDevices”option. Click

“OK”.

d. Click“OK” again to exit Device Manager and click “Yes”to

restart the system. When Windows 98 reboots, the Building

Driver Database dialog box should indicate that the new

device has been detected.

The installation is now complete.

To verify successful device setup:

1. Fromthemaindesktop, double-click on My Computer,Control

Panel, System, then Device Manager.

2. Double-click on the Sound, video and game controllers

option. “1394 DV Camcorder” should be displayed when the

device is successfully set up.

For Windows 98SE (Second Edition)

1. WhenWindows98SEbootsup,connectthesmall4-pinconnector

of the 1394 DV cable (included with 1394 DV-Cam Kit model only)

to the camcorder, then power-on the camcorder.

2. Connect the other end of the cable to the 1394 host adapter. The

camcordershouldberecognizedbythesystem.Setupiscomplete.

To verify successful device setup:

1. From the main desktop, double-click onMy Computer,Control

Panel, System,then Device Manager.

2. Double-clickonImagingDevice option.“MicrosoftDVCamera

and VCR” should be displayed when the device is successfully

setup.

Ulead VideoStudio Software Installation

The 1394 DV-Cam Kit includes the deluxe Ulead®VideoStudioTM

video editing software for producing home videos complete with

attractive titles, transitions and sound. To install:

1. InsertthesoftwareCDintotheCD-ROMdrive. Auto-runshould

startautomatically;ifnot,thenclick onStart, thenRun. Typein

D:\setup\autoexec.exe and click“OK”. (Assuming “D” is the

CD-ROM drive letter)

2. Choose“InstallUleadVideoStudio”,thenfollowtheon-screen

instructions to complete the installation.

Note: The Ulead VideoStudio software comes with the Netshow

ToolsandQuick Time utilities for optional installation. For details

on how to use the Ulead VideoStudio software, refer to the

vstudio.pdf file located in “D:\Document\Manual\English”

directory on the CD.

Connecting Other Devices

For Windows 98: When connecting 1394 devices other than a DV

camcorder, you may need to install device drivers provided by the

device manufacturer . Refer to the device's manual for details.

For Windows 98 (Second Edition): Most 1394 devices are supported.

Please refer to the device manufacturer's manual for details.

Note: Different devices may require a different type of cable.

Inhaltsverzeichnis

Andere SIIG Hostadapter Handbücher

SIIG

SIIG AP-10 Bedienungsanleitung

Beliebte Hostadapter Handbücher anderer Marken

Digital Equipment

Digital Equipment StorageWorks EK-KZPCM-UG Bedienungsanleitung

ATTO Technology

ATTO Technology ExpressPCI UL4S Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun StorEdge Bedienungsanleitung

LSI

LSI LSI21320-R Bedienungsanleitung

LSI

LSI Ultra160 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO ExpressPCI FC 3321 Bedienungsanleitung

Tekram Technology

Tekram Technology TR-824 Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

LSI

LSI S14037 Bedienungsanleitung

Sonnet

Sonnet Tempo Ultra ATA66 Bedienungsanleitung

Adaptec

Adaptec AHA-3940UW/OF Bedienungsanleitung

HighPoint

HighPoint RocketRAID 600L Bedienungsanleitung

Tekram Technology

Tekram Technology DC-820B Bedienungsanleitung

HighPoint

HighPoint RocketRAID 174x Bedienungsanleitung

Adaptec

Adaptec AHA-2944UW Bedienungsanleitung

ATTO Technology

ATTO Technology ATTO Celerity FC-81EN Bedienungsanleitung

ATTO Technology

ATTO Technology UL4D PCI Bedienungsanleitung

IBM

IBM System Storage DS4000 Bedienungsanleitung