SIIG NN2630 Bedienungsanleitung

1394 6-Port PCI

Quick Installation Guide

04-0179A

Introducing the

1394 6-Port PCI

The 1394 6-Port PCI comes with five external and one

internal 1394 ports to support 1394 devices with data transfer

rates up to 400Mbps. It works with various types of 1394

devices including hard disk drives, printers, DV camcorders,

scanners, removable drives, and other audio/video devices.

Features and Benefits

 IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface

Specification 1.0 compliant

 Fully compliant with PCI Plug-n-Play 2.1

 Adds IEEE 1394 (FireWire) technology to your PC for

high-speed I/O connectivity and the ability to link up to

63 devices

 Hot-swapping feature allows you to connect/disconnect

devices without powering down the sytem

 Supports serial bus data transfer rates of 100, 200 and

400Mbits/sec.

 Provides 5 external and 1 internal ports for various types

of 1394 device connections

 Allows you to connect DV camcorder, hard disk drive,

printers, scanners, and other audio/video devices

including TV, VCR, DVD to your computer

 Supports various brands of DV camcorders including,

Sony, Panasonic, Canon, JVC, Sharp, and more....

System Requirements

 Pentium 233-MHz computer with one available PCI slot

 1 GB or larger hard disk drive

 32 MB RAM and CD-ROM drive

 Windows 98 or later

RecommendedsystemforDigitalVideocapturing/editing:

 Pentium II 333-MHz computer

 64 MB RAM and CD-ROM drive

 80 MB of available hard disk space

 Video card with 4 MB RAM (PCI or AGP)

 Windows 98 or later

Package Contents

13946-PortPCIboard

 Driver software diskette

 One 5-year warranty card

 This quick installation guide

Figure1-1.13946-PortPCIboard

Board Layout

5 external

1394 ports

1 internal

1394 port

Power

Connector

Hardware Installation

No specific setup of your 1394 6-Port PCI is needed. Simply

install the card following the standard procedures for any

PCI card. General instructions for installing the card are

provided below, since the design of computer cases and

motherboards vary. Refer to your computers reference

manual for further information, if needed.

Caution: Static Electricity Discharge may permanently

damage your system. To avoid possible static electricity

discharge during the installation, please follow the

guidelines below:

Discharge any static electricity build up in your body

by touching a large grounded metal surface or the

computers case (if plugged in), for a few seconds.

Duringthe installation,avoid anycontact with internal

parts. Handle cards only by their external edges.

1. Turn OFF the power to your computer and any other

connected peripheral devices.

2. Unplug the power cord from the back of the computer.

3. Remove your computers cover.

4. Remove the slot bracket from an available 32-bit PCI slot.

5. To install the card, carefully align the card's bus connector

with the selected PCI slot bus connector on the

motherboard. Push the board down firmly, but gently,

until it is well seated.

6. Replace the slot bracket's holding screw to secure the

card.

7. Replace the computer cover and reconnect the power

cord.

Software Installation

This section will guide you through the installation of 1394

6-Port PCI for Windows 98, 98SE and 2000 drivers.

Windows 98/98SE Driver Installation

1. Turn computer ON. When Windows boots up, a New

Hardware Found dialog box should appear and theOHCI

CompliantIEEE 1394Host Controller is identified.

2. At theAdd New HardwareWizard window, clickNext.

3. ChooseSelectforthebestdriverforyourdevices,and

clickNext.

4. Insert the Windows 98/98SE CD-ROM and check the

"CD-ROM" option. ClickNext.

5. ForWindows98, ClickNext.

For Windows98SE, Choose The updated driver

(Recommended),and clickNext, thenNextagain.

Note: if Windows prompts you for the Windows

CD-ROM again, type in D:\win98 and click OK.

(Assuming "D" is the CD-ROM driver letter)

6. ClickFinish to complete the installation.

Windows 2000 Driver Installation

Windows 2000 will automatically load the driver for this

adapter. If you are prompted to insert the Windows 2000

CD, insert the CD in the CD-ROM drive and "browse" to the

I386 folder to finish the installation.

To verify successful driver installation:

1. Windows 98 & 98SE:

a. Fromthemaindesktop,double-clickonMyComputer,

ControlPanel,System,thenDeviceManager.

b. Double-click on1394 Bus Controller device option.

Windows98,PCIOHCICompliantIEEE1394Host

Controllershould be displayed.

Windows98SE,"TexasInstrumentsOHCICompliant

IEEE1394Host Controller shouldbedisplayed.

2. Windows2000:

a. Right click onMy computer & drag to Properties.

b. Click"Hardware"tabthen"DeviceManager"button.

c. Double-click IEEE 1394 Bus Controller,"Texas

Instruments OHCI Compliant IEEE 1394 host

controller"should be displayed.

Connecting 1394 Devices

Connecting a DV Camcorder

Before setting up a digital video camcorder, verify your

version of Windows(ie..Windows 98 or Windows 98 Second

Edition.) Also, before connecting your DV camcorder to the

1394 host adapter, perform the appropriate steps below for

your version of Windows.

Windows98:

1. Insert the driver diskette. Go to Start, Run,then type:

"A:\DVconnect150.exe".Click"OK".

2. Restart your system.

3. Connect the small 4-pin connector of the 1394 DV cable

(not supplied) to the camcorder, then power-on the

camcorder.

4. Connect the other end of the cable to the 1394 host

adapter.

5. The Building Driver Database dialog box should appear

and the device driver will be automatically loaded.

If theBuilding DriverDatabasedialogboxdoes notappear:

a. Double-clickonMyComputer,ControlPanel,System,

DeviceManager,then 1394Bus Controllerdevice

options.

b. Highlight OHCI Compliant IEEE 1394 Host

Controllerandclick onProperties, thenSettings.

c. ChecktheSupportNon-CompliantDevicesoption.

Click OK.

d. ClickOKagain to exitDevice Manager and click

Yestorestartthe system. WhenWindows98 reboots,

theBuildingDriverDatabase dialogboxshouldindicate

that the new device has been detected.

Windows98SE &2000:

1. When Windows boots up, connect the small 4-pin

connector of the 1394 DV cable (not supplied) to the

camcorder, then power-on the camcorder.

2. Connect the other end of the cable to the 1394 host

adapter, Windows should recognized camcorder

automatically.

To verify successful device connection:

1. Windows 98:

a. Fromthemaindesktop,double-clickonMyComputer,

ControlPanel,System,thenDeviceManager.

b. Double-clickontheSound,videoandgamecontrollers

option.1394 DV Camcordershould be displayed

when the device is successfully set up.

2. Windows 98SE:

a. Fromthemaindesktop,double-clickonMyComputer,

ControlPanel,System,thenDeviceManager.

b. Double-clickonImagingDeviceoption. Microsoft

DV Camera and VCR should be displayed when

the device is successfully setup.

3. Windows2000:

a. Right-click on My computer & drag to Properties.

b. click "Hardware" tab then "Device Manager" button.

c. Double-click on Imaging Device, Microsoft DV

Camera and VCR should be displayed when the

device is successfully setup.

Connecting Other Devices

Windows 98: When connecting 1394 devices other than a DV

camcorder, you may need to install device drivers provided

by the device manufacturer . Refer to the device's manual for

details.

Windows98SE(SecondEdition) &Windows2000:Most1394

devices are supported. Please refer to the device

manufacturer's manual for details.

Note:Different devices may require a different type of cable.

Technical Support & RMA

Questions? SIIGsOnline Supporthas the answers! Simply visit our

web site atwww.siig.com and click on theONLINE SUPPORT icon

for instant technical support. You may also e-mail us online at:

http://www.siig.com/technical_support_form.html

If you need additional help, Tech Support Specialists are available from

8:00 a.m. to 5:00 p.m. Mon.  Fri., PST at(510)353-7542.

In order for SIIGs Technical Support to give you prompt service, you will

need the following information.

Part Number:

Computer Configuration:

Return Merchandise Authorization (RMA)

SIIG warrants to the original buyer of the product that the hardware is

free of defects in materials and workmanship for a period of five years

from the date of purchase. If your product fails to be in good working

order during the warranty period, you may return it to SIIG for repair or

replacement at SIIG's option. To return a product:

Step 1: Call SIIG's RMA Department

Call the RMA Department at (510) 413-5333for a Return Merchandise

Authorization(RMA)number.TogetaRMAnumber,youmusthave

yourproductserialnumber.Theserialnumberislocatedonthesideof

theboxitcameinandonthebackoftheproduct.

Step 2: Complete the RMA form

 Fill out the RMA form and include it with the product.

 Properly pack the product for shipping. All software, cable(s)

and accessories that came with the original package must be

included.

 Clearly write your RMA number on the top of the returned

package and on the accompanying RMA form. SIIG will refuse

anyshippingpackage,andnotberesponsibleforaproduct

returnedwithoutaRMAnumberpostedontheoutsideofthe

shippingcarton.

Step 3: Ship the product

You are responsible for the shipping cost to SIIG at the following address:

SIIG,Inc. RMA#_______________

6078 Stewart Ave.

Fremont, CA 94538

SIIG will ship the repaired or replaced product via UPS Ground or US

Mail at no cost to you.

PRODUCTNAME MODEL NUMBER

1394 6-Port PCI NN2630

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a

ClassBdigitaldevice, pursuanttopart15 oftheFCCRules.These limitsare

designed to provide reasonable protection against harmful interference in a

residentialinstallation.Thisequipmentgenerates,uses,andcanradiateradio

frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However,thereisnoguaranteethatinterferencewillnotoccurinaparticular

installation. If this equipment does cause harmful interference to radio and

television reception, which can be determined by turning the equipment off

andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore

of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio or TV technician for help

Caution:

Any changes or modifications not expressly approved by the party

responsibleforcompliancecouldvoidtheuser'sauthoritytooperate

this equipment

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

1394 6-Port PCI is a trademark of SIIG, Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows

NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of

Intel Corporation. Firewire, iMac, and Mac are registered trademarks of Apple Corporation.

i.Link is a trademark of Sony Electronics Inc. Other names used in this publication are for

identification only and may be trademarks of their respective companies.

May,2000 Copyright

Inhaltsverzeichnis

Andere SIIG PCI-Karte Handbücher

SIIG

SIIG Hi-Speed USB 4-Port PCI Bedienungsanleitung

SIIG

SIIG NN-E38012-S2 Bedienungsanleitung

SIIG

SIIG USB 2.0 Video Capture Device Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Bedienungsanleitung

SIIG

SIIG Serial ATA 4-Channel PCI Bedienungsanleitung

SIIG

SIIG DP SuperSpeed USB 3.0 2-Port PCIe i/e Bedienungsanleitung

SIIG

SIIG CyberPro PCI 2S Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Bedienungsanleitung

SIIG

SIIG 1394 PCI Adapter Bedienungsanleitung

SIIG

SIIG NN-E20112-S2 Bedienungsanleitung

SIIG

SIIG CyberPro PCI 1S Bedienungsanleitung

SIIG

SIIG SC-SA0012-S1 Bedienungsanleitung

SIIG

SIIG JJ-P49012-S6 Bedienungsanleitung

SIIG

SIIG VV-CV0012-S1 Bedienungsanleitung

SIIG

SIIG NN-830012-S2 Bedienungsanleitung

SIIG

SIIG DP 4-Port USB 3.0 PCIe i/e Bedienungsanleitung

SIIG

SIIG SC-SAE212-S2 Bedienungsanleitung

SIIG

SIIG Low Profile PCI-2S Bedienungsanleitung

SIIG

SIIG Serial ATA PCI Bedienungsanleitung

SIIG

SIIG JJ-P02D11-S6 Bedienungsanleitung

SIIG

SIIG PCI-to-PC Card Pro Bedienungsanleitung

SIIG

SIIG CyberParallel Dual Bedienungsanleitung

SIIG

SIIG Cyber 1S1P PCI Bedienungsanleitung

SIIG

SIIG 04-0358C Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung

Alpha Networks

Alpha Networks WMP-A13V Bedienungsanleitung