Silca DUO POWER Bedienungsanleitung

Operating manual

D434685XA

vers.

2.0

This manual has been drawn up by SILCA S.p.A.

microfilm or other) without the written permission of SILCA S.p.A.

Edition: october 2010

Printed in India

by MINDA SILCA Engineering Ltd.

Plot no.37, Toy City, GREATER NOIDA

(U.P.) - 201308

IMPORTANT NOTE: in compliance with current regulations relating to industrial property, we hereby state that the

trade-marks or trade names mentioned in our documentation are the exclusive property of authorized

manufacturers of locks and users.

Said trade-marks or trade names are nominated only for the purposes of information so that any lock for which our

keys are made can be rapidly identified.

INDEX

1 TRANSPORT ...................................................................................................5

1.1 Packing ... ..............................................................................................5

1.2 Transport ... ...........................................................................................5

1.3 Unpacking .............................................................................................5

1.4 Handling the machine ...........................................................................5

2 DUO / DUO POWER machines WORKING PARTS ......................................6

3 DUO BRAZIL machine WORKING PARTS ...................................................7

4 MACHINE DESCRIPTION ...............................................................................8

4.1 Technical Data ......................................................................................9

4.2 Graphics . ..............................................................................................9

4.3 Electric circuit ......................................................................................10

5 ACCESSORIES PROVIDED .........................................................................11

6 MACHINE INSTALLATION and PREPARATION ........................................12

6.1 Checking for damage ..........................................................................12

6.2 Environmental conditions ....................................................................12

6.3 Positioning . .........................................................................................12

6.4 Description of work station ..................................................................13

6.5 Separate parts ....................................................................................13

6.6 Connection to the mains .....................................................................13

6.7 Cutter shield ........................................................................................14

7 MACHINE REGULATION AND UTILIZATION .............................................15

7.1 Checking and setting ..........................................................................15

7.2 Calibration - LEFT-HAND CARRIAGE ...............................................15

7.3 Calibration - RIGHT-HAND CARRIAGE .............................................17

8 CUTTING OPERATIONS ..............................................................................20

8.1 Key cutting ..........................................................................................20

8.1.1 Carriage release (right or left-hand side) ............................................. 20

8.1.2 Clamp rotation ..................................................................................... 20

8.1.3 Carriage translation on DUO key-cutting machine .............................. 21

8.1.4 Carriage translation on DUO BRAZIL key-cutting machine .................21

8.1.5 Flared cuts cutting bit keys (right-hand carriage) .................................22

8.2 Cutting flat cylinder and vehicle keys - LEFT-HAND carriage ............23

8.2.1 Using the accessories .......................................................................... 25

8.3 Cutting double bit, pump and mail box keys - RIGHT-H. carriage.......27

8.3.1 Cutting bit and double bit keys ............................................................. 29

8.3.2 Cutting keys with central stop .............................................................. 30

8.3.3 Cutting mail box keys ........................................................................... 30

8.3.4 Cutting pump keys ...............................................................................31

9 MAINTENANCE .............................................................................................33

9.1 Replacing the cutting tool ...................................................................33

9.2 Access to the lower part .....................................................................34

9.3 Replacing the brush ............................................................................35

9.4 Replacing and/or tightening the belt ...................................................35

9.5 Replacing the tracer point ...................................................................36

9.6 Regulating left carriage depth .............................................................37

9.7 Replacing the fuses ............................................................................37

9.8 Replacing main switch ........................................................................38

9.9 Replacing motor on switch ..................................................................39

9.10 Replacing motor/condenser ................................................................40

9.11 Replacing lamp ...................................................................................41

10 DISPOSAL ....................................................................................................42

11 ASSISTANCE ................................................................................................43

11.1 How to request service .......................................................................43

Operating manual - English DUO

GUIDE TO THE MANUAL

This manual has been produced to serve as a guide for users of the DUO key-cutting machine. Read it

carefully; it is essential if you wish to operate your machine safely and efficiently.

Consultation

The contents of the manual are divided into sections relating to:

- Transport and handling ....................................................................................... Ch. 1

- Description of machine and safety devices ........................................................ Ch. 2-3-4-5

- Proper use of machine ........................................................................................ Ch. 6-7-8

- Maintenance ........................................................................................................ Ch. 9

Technical terms

Common technical terms are used in this manual. To assist those with little experience of key cutting,

below is an illustration of the terms used for the different parts of keys:

Fig. 1

Fig. 2

1) Head

2) Rim

3) Stop

4) Blade

5) Tip

6) Back

7) Cuts

8) Stem

9) Bit

111

WITH LEFT-HAND CARRIAGE

only on DUO BRAZIL version

WITH RIGHT-HAND CARRIAGE

PUMP KEYS

ATTENTION: see chap. 8.3.4.

ONLY on DUO POWER version

ONLY on

DUO and DUO BRAZIL

DUO Operating manual - English

4 Copyright Silca 2 010

GENERAL INTRODUCTIONS

The DUO key-cutting machine has been designed according to the specifications of the Machine Direc-

tives. From the design stage risks for the operator have been eliminated in all areas: transport, key-cut-

ting, regulation and maintenance.

Other risks have been eliminated by the use of protective devices for the operator.

The protective devices us ed are designed not to provoke further risks and , above all, they cannot be

ignored unless deliberately cut out. They do not hinder visibility of the work area.

A special adhesive label is attached to the machine warning the operator to use goggles during the cut-

ting operations, and this is strongly recommended in this manual.

The material used in the manufacture of this machine and the components employed during use of the

machine are not dangerous and their use complies with standards.

Use

The DUO must be installed and used in the way laid down by the manufacturer.

If th e key-cuttin g ma chine is used differently or for purposes differ ent from those describe d in this

manual, the customer will forego any rights he may have over SILCA S.p.A. Furthermore, unforeseen

danger to the operator or any third parties may arise from incorrect use of the machine.

Negligence in the use of the machine or failure on the part of the operator to observe the instructions

given in this manual are not covered by the guarantee and the manufacturer declines all responsibility

in such cases.

It is therefore indispensable to read the operating manual carefully in order to make the best use

of the DUO and benefit from its potential.

Instructions manual

The instructions manual provided with the machine is essential to i ts proper use and to carry out th e

necessary maintenance.

We therefore recommend protecting the manual from damage in a safe sheltered place, easily to hand

for quick consultation.

Further Risks

There are no further risks arising from the use of the machine.

Protection and safety precautions for the operator

The DUO key-cutting machine is built entirely to standards. The operations for wh ich it has been de-

signed are easily carried out at no risk to the operator.

The adoption of general safety precautions (wearing protective goggles) and observation of the instruc-

tions provided by the manufacturer in this manual eliminate all human error, unless deliberate.

The DUO key-cutting machine is designed with features which make it completely safe in all its parts.

• Power supply

The key-cutting machine is powered by electricity supplied through a separable earthed plug.

•Start-up

The machine is started up:

- activating the safety main switch on the left-hand side of the machine;

- activating the motor on switch the left-hand side.

• Maintenance

The operations to regulate, service, repair and clean the machine have been devised in the simplest and

safest way possible. There is no danger of removable parts being re-placed wrongly or unsafely.

• Machine Identification

The DUO key-cutting machine is provided with an identification label which shows the serial number (fig.

3).

Fig. 3

(*)

see

chap. 10 "DISPOSAL", page 42.

Operating manual - English DUO

1 TRANSPORT

The DUO key-cutting machine is easily transported and is not dangerous to handle. The packed ma-

chine can be carried by one person.

1.1 Packing

The DUO is packed in a strong cardboard box, the dimensions of which are shown in fig. 4, sufficiently

robust to be used for storing the machine for long periods.

Inside the box the machine is enclosed in two expanded polymer shells. The shells and cardboard box

ensure safe transportation and protect the machine and all its parts.

Fig. 4

1.2 Transport

To avoid damaging the DUO it must always be transported in its packing case. This will prevent sudden

movements or rough handling from damaging the machine, persons or things.

1.3 Unpacking

To remove the machine from the packing box:

1) cut the straps with scissors and remove,

2) prise off the staples,

3) open the box without damaging it as it may be used again (e.g. removals, dispatch to the manufac-

turers for repairs or servicing),

4) check the contents of the box, which should comprise:

- 1 DUO key-cutting machine packed in a protective shell;

- 1 set of documents, including: operating manual, spare parts list and guarantee;

- 1 connecting wire;

- 1 tool kit

5) remove the key-cutting machine from the protective shell.

1.4 Handling the machine

When the DUO has been unpacked, place it directly on its workbench.

This operation can be carried out by one person, firmly holding the base, and no other part, to lift and

carry the machine.

500

596

350

Keep dry This side up

Handle with care

DUO Operating manual - English

6 Copyright Silca 2 010

2 DUO / DUO POWER machines WORKING PARTS

Fig. 5

A - left-hand carriage

A1 - carriage lock/release pin - left-hand side

B - right-hand carriage

B1 - carriage lock/release pin - right-hand side

C - left-hand carriage movement lever

D - clamps for flat keys

D1 - gauges knob

E - clamps knobs (left-hand carriage)

F - prismatic cutter for flat keys

G - left tracer point for flat keys

G1 - centesimal ring - left tracer point

H - right-hand carriage movement lever

J - clamps for bit keys

K - clamps knobs (right-hand carriage)

L - tilting move ment activa ting pin (right-hand car-

riage)

M - milling cutter for bit keys

N - right tracer point for bit keys

N1 - centesimal ring - right tracer point

O - handwheel for carriage movement

P - brush

Q - top cover

R-lamps

S - chippings tray

T - main switch

U - motor on switch

V - supply socket

V1 - fuses

W - cutters protective shield

F M

DUO / DUO POWER

TV U D1V1

Operating manual - English DUO

3 DUO BRAZIL machine WORKING PARTS

Fig. 6

A - left-hand carriage

B - right-hand carriage

C - left-hand carriage movement lever

D - clamps for flat keys

D1 - gauges knob

E - clamps knobs (left-hand carriage)

F - prismatic cutter for flat keys

G - left tracer point for flat keys

G1 - centesimal ring - left tracer point

H - right-hand carriage movement lever

J - clamps for bit keys

K - clamps knobs (right-hand carriage)

L - tilting movement activating pin (right-hand car-

riage)

M - milling cutter for bit keys

N - right tracer point for bit keys

N1 - centesimal ring - right tracer point

P - brush

Q - top cover

R-lamps

S - chippings tray

T - main switch

U - motor on switch

V - supply socket

V1 - fuses

W - cutters protective shield

F M

DUO BRAZIL

TV U D1V1

DUO Operating manual - English

8 Copyright Silca 2 010

4 MACHINE DESCRIPTION

DUO is a professional key-cutting machine, designed to duplicate:

• flat keys for cylinders and vehicles and cruciform keys: with left-hand carriage.

• bit, double bit, pump and mail box keys*: with right-hand carriage.

Fig. 7

The main parts of the machine are described below:

Main switch

The ke y-cutting machine is co nnected to a pow er supply so cket provided wit h a differentia l switch.

Pressing the switch (T) powers the machine and illuminates the lamps (R) to indicate that current is on.

ATTENTION: Switch (T) is electromagnetic, in the event of a power failure it goes out automatically. When

electricity is restored it must be reset manually to power the machine again.

Motor on switch

On the left-hand side of the DUO key-cutting machine there is also a switch for starting up the motor (U).

ATTENTION: the illuminated switch remains on to indicate that the key-cutting machine has been started

(cutter in motion).

Motor and transmission unit

Motor transmission takes place by belt.

On the right-hand side of the motor there is the transmission shaft which moves the brush (P).

On the left-hand side of the motor there is the shaft which moves the cutter spindle.

These components are protected by a top cover (Q).

Clamp carriages

The carriages comprise two clamps. They move horizontally and frontally controlled by handles (C and

H).

The DUO machine carriages can be locked into a fixed position and in this way achieve translation by

means of the flywheel located on the right-hand side of the machine (chap.8.1.3, page 21) (Attention:

not available on Duo Brazil version).

The carriages are so designed as to avoid accumulation of dust or cutting swarf.

The machine is designed with a ramp along which chippings can fall into the special chippings tray (S)

placed under the carriage and easily removable for emptying and cleaning.

Cutting unit

The cutting unit contains the actual wo rking parts of the DUO key-cutting machine , which operate to-

gether to cut and finish keys "read" from the originals.

The working parts are described below:

•Cutting Tools

The cutting tools (F) and (M) are the parts of the DUO used for cutting key blanks. The cutting tools are

in HSS super rapid steel and are protected by a special cover (W) to ensure safe operation. The shield

(W) is mobile and can be placed over the cutter that is not in use.

• Tracer points

The tracer points are dedicated to reading cuts on the key to be duplicated and are:

- tracer point (G) on the left-hand side of the machine, for flat keys for cylinders and vehicles and cru-

ciform keys;

- tracer point (N) on the right-hand side of the machine, for bit, double bit, pump and mail box keys*.

The depth of the tracer points is easily regulated by means of the relative graduated nut.

* Mail box keys only on DUO and DUO BRAZIL versions

DUO / DUO POWER DUO BRAZIL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Silca Drehbank Handbücher

Silca

Silca Speed Bedienungsanleitung

Beliebte Drehbank Handbücher anderer Marken

Holzmann

Holzmann VD 1100ECO Bedienungsanleitung

Grizzly

Grizzly G0632 Kurzanleitung

Grizzly

Grizzly G0462 Bedienungsanleitung

Grizzly

Grizzly G0709 Bedienungsanleitung

Grizzly

Grizzly G0949G Bedienungsanleitung

Kval

Kval 990-H Bedienungsanleitung

Teknatool

Teknatool Nova Mercury Bedienungsanleitung

Traub

Traub TNL12.2 Bedienungsanleitung

WoodFast

WoodFast M305 Bedienungsanleitung

Milltronics

Milltronics ML Series Handbuch

Milltronics

Milltronics SL6 Series Handbuch

OmniTurn

OmniTurn GT-75 Bedienungsanleitung

Axminster

Axminster CQ6230A-2/910 Bedienungsanleitung

Jet

Jet JWL-1640EVS Service-Handbuch

Grizzly

Grizzly G4000 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN ED1000FB Bedienungsanleitung

Hercus

Hercus 260 Bedienungsanleitung

Optimum

Optimum OPTIturn TM 3310 Bedienungsanleitung