Silvercrest KH 206 Bedienungsanleitung
Wireless Doorbell
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH206-06/10-V2
KH 206
Wireless Doorbell
Operating instructions
Dzwonek do drzwi sterowany radiowo
Instrukcja obsługi
Ajtócsengő
Használati utasítás
CV_KH206_53464_GB_PL_HU.indd 1-3CV_KH206_53464_GB_PL_HU.indd 1-3 19.07.2010 16:17:02 Uhr19.07.2010 16:17:02 Uhr
KH 206
23
5
6
7
48
9
0
q
w
e
r
t
1
A
B
CV_KH206_53464_GB_PL_HU.indd 4-6CV_KH206_53464_GB_PL_HU.indd 4-6 19.07.2010 16:17:02 Uhr19.07.2010 16:17:02 Uhr
- 1 -
Read these operating instructions carefully before using the appliance for
the first time and preserve this booklet for later reference. Pass this booklet
on to whoever might acquire the appliance at a future date.
INDEX PAGE
Intended Use 2
Items supplied 2
Technical data 3
Safety instructions 3
The appliance parts 5
Taking the appliance into use 6
Maintenance 10
Cleaning and Care 10
Disposal 11
CE Conformity 12
Importer 12
Warranty and Service 12
LB4A.indb 1LB4A.indb 1 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 2 -
Intended Use
This appliance serves as a radio doorbell system for wireless
visitor signalisation and thus makes possible the operation of
a door bell without wiring. The appliance is intended for
domestic use only, not for commercial or industrial applications.
No warranty is provided for damages resulting from improper
use of the appliance!
Items supplied
1 Receiver
1 Transmitter
2 1.5 V Batteries, Type "AA/Mignon/LR6"
1 3 V Battery, Type CR2032
1 Stand for the receiver
1 Screw for fixing the transmitter on to the assembly plate
5 Nameplates
1 Plastic cover for the nameplate
2 Wallplugs with screws for transmitter assembly
1 Wallplug with a screw for receiver suspension
1 Operating manual
LB4A.indb 2LB4A.indb 2 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 3 -
Technical data
Power supply
Receiver: 2 x 1.5V Type "AA/Mignon/LR6"
Transmitter: 1 x 3V Type CR2032
Type of transmitter
protection: IP X4
Transmission frequency: 433 MHz
Range: 100 m (Free-space range)
Ring-tone volume: min. 73dB(A) in 1 m (on max. setting)
Safety instructions
Do not permit children to handle electrical appliances•
without supervision, as they cannot correctly assess the
possible dangers of injury.
Check the appliance and all parts for visible damages.•
If the appliance is damaged, arrange for it to be checked
by Customer Services.
NEVER open the appliance. There are no user-serviceable•
elements inside.
Risk of accidents and injury!
This appliance is not intended for use by individuals (including•
children) with restricted physical, physiological or intellectual
abilities or deficiences in experience and/or knowledge
unless they are supervised by a person responsible for their
safety or receive from this person instruction in how the appli-
ance is to be used.
LB4A.indb 3LB4A.indb 3 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 4 -
Children should be supervised to ensure that they do not play•
with the appliance.
Keep batteries well away from children. Children can put bat-•
teries into their mouths and swallow them. If a battery is swal-
lowed, medical assistance must be sought IMMEDIATELY.
For the handling of batteries please observe the following:
Risk of explosion!
Do not throw batteries into a fire.•
Do not recharge the batteries.•
Never open batteries, never solder or weld batteries.•
The risk of explosions and injuries exists!
Regularly check the condition of the batteries. Leaking•
batteries can cause damage to the appliance.
If you do not intend to use the appliance for an extended•
period, remove the batteries.
Damage on the appliance
Avoid the simultaneous usage of batteries of varying•
types resp. capacities.
Do not use any aggressive chemical substances for•
cleaning.
NEVER submerse the appliance in water. Wipe it only•
with a slightly damp cloth.
LB4A.indb 4LB4A.indb 4 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 5 -
Protect the receiver against moisture. Use it only in dry•
rooms, do not use it when it is raining outdoors or when
close to liquids.
Ensure that, when the receiver is in use, it cannot become•
wet or moist and that it cannot be damaged.
The appliance parts
Receiver (Fig. A)
qSignal indicator
w:Synchronisation button, Receiver
eVOL.: Button for sound volume control
r: Button for melody selection
t: Signal type switch (optical/acoustic)
ySpeaker
uStand
iBattery compartment - receiver
oLoop for suspension of the receiver
aBattery compartment cover - receiver
Transmitter (Fig. B)
sBell button
dNameplate
fIndicator for signal confirmation
gBattery compartment - Transmitter
hAssembly plate - Transmitter
LB4A.indb 5LB4A.indb 5 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 6 -
Taking the appliance into use
Take the appliance out of the carton and remove all packaging
materials.
Inserting the batteries in the receiver
Open the battery compartment>ion the rear of the
appliance.
Insert 2 x 1.5V batteries of the type "AA/Mignon/LR6">
as per the insertion markings shown in the battery
compartment i.
Replace the battery compartment cover>a.
Inserting the battery in the transmitter
Remove the assembly plate>hfrom the transmitter.
Insert a 3 V battery of type CR2032 into the battery>
compartment g. The side marked with "+" must be
facing up.
Replace the assembly plate>hback onto the transmitter.
Should the performance of the appliance diminish or fall
away completely, it means the batteries are exhausted. The
used batteries should then be changed for new ones of the
same type.
LB4A.indb 6LB4A.indb 6 20.07.2010 10:35:41 Uhr20.07.2010 10:35:41 Uhr
- 7 -
Selecting the signal type
The receiver can indicate the reception of a door-ring signal
either optically, acoustically or optically and acoustically. To
select, bring the signal type switch tinto the desired position:
- only acoustic ring indications, the selected melody
sounds,
- only optical ring indications, the signal indicator blinks,
- optical and acoustic ring indications.
Adjusting the signal sound volume
To select the desired signal sound volume, press the VOL.
button erepeatedly until the desired volume level is set.
Loud Medium Quiet
Selecting the call melody
There are 36 different call melodies stored in the appliance.
Repeatedly press the button for melody selection>r.
When the desired melody sounds, stop the selection.>
The appliance will utilise the last melody it played as the
call melody.
LB4A.indb 7LB4A.indb 7 20.07.2010 10:35:42 Uhr20.07.2010 10:35:42 Uhr
- 8 -
Synchronising the transmitter and receiver
The transmitter and receiver of this doorbell system can com-
municate with each other on a variety of different frequencies.
Consequently, up to four transmitters can be operated with
one receiver. The precondition for this is that the transmitter and
receiver within a system are working on the same frequency.
For this, you must synchronise the appliances as follows:
Press the synchronisation button on the receiver>w.
The red signal indicator qnow glows.
Now press the bell button>s on the transmitter.
If the synchronisation has been a success, the receiver notifies
you of the programmed call signal. The appliances terminate
the synchronisation mode and the signal indicator qgoes
out. Should the receiver not react as described, repeat the
synchronisation.
The transmitter shows, with a brief glowing of the indica-
tor fwhen being activated, the transmission of the signal
to the receiver.
LB4A.indb 8LB4A.indb 8 20.07.2010 10:35:42 Uhr20.07.2010 10:35:42 Uhr
Andere Handbücher für KH 206
1
Inhaltsverzeichnis
Sprachen:
Andere Silvercrest Zubehör Handbücher
Silvercrest
Silvercrest 91210 Bedienungsanleitung
Silvercrest
Silvercrest SPBL 6000 A1 Bedienungsanleitung
Silvercrest
Silvercrest NMD 3.7 B2 Bedienungsanleitung
Silvercrest
Silvercrest STK 17 A1 Bedienungsanleitung
Silvercrest
Silvercrest 60113 Bedienungsanleitung
Silvercrest
Silvercrest Wifi Socket SWS-A1 Bedienungsanleitung
Silvercrest
Silvercrest SWUB 85 D3 Bedienungsanleitung
Silvercrest
Silvercrest SPB 5.000 A1 Merkblatt
Silvercrest
Silvercrest STK 36V2 A1 Technische Daten
Silvercrest
Silvercrest SPB 2.6 A1 Merkblatt
Silvercrest
Silvercrest SAD 12 D3 Bedienungsanleitung
Silvercrest
Silvercrest SAD 3D 12 A1 Bedienungsanleitung
Silvercrest
Silvercrest SCP 10000A1 Bedienungsanleitung
Silvercrest
Silvercrest SPBH 5.200 A1 Produktinformationsblatt
Silvercrest
Silvercrest KH 205 Bedienungsanleitung
Silvercrest
Silvercrest SWUB 85 B2 Bedienungsanleitung
Silvercrest
Silvercrest 284705 Bedienungsanleitung
Silvercrest
Silvercrest SFKS 2 A1 Bedienungsanleitung
Silvercrest
Silvercrest SEAS 20 A1 Bedienungsanleitung
Silvercrest
Silvercrest SPB 2.600 B1 Bedienungsanleitung
