Silvercrest SQWP8000 1A1 Bedienungsanleitung

QI WIRELESS CHARGING

POWER BANK

CARGADOR INALÁMBRICO QI Y

BATERÍA DE RESPALDO

SQWP8000 1A1

IAN 306591IAN 306591

Distributed by/Distribuido por:

Lidl US LLC., Arlington, VA 22202

FCC ID: 2AJ9O-HG4127

Model No./Modelo Núm.: HG04127A-US/ HG04127B-US

Version/Versión: 08/ 2018

Made in/ Hecho en: China

QI WIRELESS CHARGING POWER BANK

Operation and Safety Notes

CARGADOR INALÁMBRICO QI Y BATERÍA DE

RESPALDO

Instrucciones de utilización y de seguridad

US-EN Operation and Safety Notes Page 3

US-ES Instrucciones de utilización y de seguridad Página 26

US-EN 3

Description of signal words .............................. Page 4

Customer service................................................... Page 4

List of pictograms used....................................... Page 5

Introduction ............................................................. Page 6

Intended use............................................................ Page 6

Trademark notices................................................ Page 6

Scope of delivery .................................................. Page 7

Important safety instructions........................... Page 7

Description of parts ............................................. Page 13

Technical data ........................................................ Page 14

Before use ................................................................ Page 15

Operation and use................................................Page 15

Charging the power bank .......................................Page 15

Checking the battery status.....................................Page 16

Qi wireless charging................................................Page 17

Charging mobile devices with the power bank......Page 18

Troubleshooting..................................................... Page 19

Cleaning and care ................................................. Page 22

Storage when not in use.................................... Page 22

Disposal..................................................................... Page 22

Three year limited warranty............................ Page 23

US-EN 4

DESCRIPTION OF SIGNAL WORDS

WARNING indicates a hazardous situation that, if not

avoided, could result in death or serious injury.

CAUTION indicates a hazardous situation that, if not

avoided, could result in minor or moderate injury.

NOTICE indicates information considered important, but

not hazard related (e.g. messages related to property

damage).

CUSTOMER SERVICE

Call customer service at 1 (844) 543-5872

Visit the Website Customer Service Platform at

www.lidl.com/contact-us

Visit a LIDL store for further assistance.

IAN 306591 Please have your IAN number ready.

US-EN 5

LIST OF PICTOGRAMS USED

NOTE: This symbol with the signal

word “NOTE“ provides additional useful

information.

Voltage (direct current)

Watt (power)

WARNING! EXPLOSION HAZARD!

A warning with this symbol and word

“WARNING! EXPLOSION HAZARD”

indicates the potential threat of explosion.

Failure to observe this warning may result

in serious or fatal injuries and potential

property damage. Follow the instructions

in this warning to prevent serious injuries, a

danger to life or property damage!

This action sign indicates to wear suitable

protective gloves! Follow the instructions

to avoid hands striking or being struck by

objects or being in contact with thermal or

chemical materials!

“Qi“ and the Qi logo mark are trademark

of the Wireless Power Consortium (WPC)

Smart Fast Charge (SFC): Maximum

current available is used to optimize

charging time.

US-EN 6

QI WIRELESS CHARGING

POWER BANK

PIntroduction

Congratulations on your purchase. You have selected a quality

product. The instructions for use are a part of the product.

They contain important information about the safety, use and

disposal of the product. Before using the product, please learn

about all the safety information and usage instructions. Only use

the product as described and for the speciﬁed applications. If

you lend the product to someone else, please also give all the

instructions.

PIntended use

This QI WIRELESS CHARGING POWER BANK (hereinafter

referred to as “product”) is an Information Technology device

which is solely intended to be used to charge mobile devices

which have Qi wireless charging technology. Devices that do

not support Qi wireless technology can be charged through

a USB port. This product is not intended for commercial use.

Manufacturer is not liable for damages, which result from non-

intended use.

PTrademark notices

 USB®is a registered trademark of USB Implementers

Forum, Inc.

 “Qi“ and the Qi logo mark are trademark of the Wireless

Power Consortium (WPC)

 The Smart Fast Charge trademark and trade name is the

property of their respective owners.

 The SilverCrest trademark and trade name is the property of

their respective owners.

 Any other names and products may be trademarks or

registered trademarks of their respective owners.

US-EN 7

PScope of delivery

1 Qi Wireless Charging Power Bank

1 USB cable

1 Instructions for use

IMPORTANT SAFETY

INSTRUCTIONS

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS

KEEP FOR FUTURE REFERENCE. IF PASSING THIS PRODUCT

ON TO A THIRD PARTY ALSO INCLUDE ALL DOCUMENTS.

FAILURE TO OBSERVE THE FOLLOWING WARNINGS

COULD RESULT IN DEATH OR SERIOUS INJURY.

DANGER TO LIFE AND RISK OF ACCIDENT FOR

INFANTS AND CHILDREN!

Risk of suﬀocation!

Never leave children unsupervised with the packaging material.

The packaging material poses a suﬀocation hazard. Children

frequently underestimate the dangers. The packaging material

is not a toy.

 This product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the product by a person responsible for their safety.

US-EN 8

Children should be supervised to ensure that they do not

play with the product.

 Packaging materials are not a toy. Keep all packaging

materials out of the reach of children. Suﬀocation hazard!

 Never open the product casing. This product has no internal

parts requiring maintenance.

 Do not independently convert or modify the product.

 Metal objects between the charger and device to be

charged will get hot and can burn you. Remove foreign

objects from the charger before charging device.

 Repairs to the product must be performed by authorised

specialised companies or customer service. Improper repairs

may place the user in considerable danger. They will also

void the warranty.

 Do not expose the product to dripping water or splashing

water and do not place containers ﬁlled with liquids such as

vases or open drinks on top of or beside the product.

 If you use a USB power supply, the socket used must always

be easily accessible so that the USB power supply can be

quickly removed from the socket in the case of emergency.

Please also refer to the manufacturer‘s instruction manual.

 Improper handling of lithium polymer batteries can result

in ﬁre, explosions, hazardous substances leaking, or other

dangerous situations! Do not throw the product into the ﬁre,

as this could lead to the built-in battery exploding.

 Observe the usage restrictions and prohibitions of use

for battery-operated products in situations which may be

hazardous such as at petrol stations, airports, hospitals, etc.

 During charging process, please be noticed that the product

must not be covered. Otherwise the product can be heated.

 The product should never be charged at a PC or notebook,

because due to the high power consumption, the PC or

notebook could be damaged.

US-EN 9

 Two Qi charging devices and/or power banks must never

be placed on top of each other with the charging surface. A

device defect is the possible consequence.

FAILURE TO OBSERVE THE FOLLOWING WARNINGS

COULD RESULT IN MINOR OR MODERATE INJURY.

 Check the product for visible external damage before use.

Do not use the product if damaged or dropped.

 Always use the product on ﬂat and smooth surface. The

product could be damaged if it falls.

 Do not expose the product to direct sunlight or high

temperatures. It may otherwise overheat and be damaged

beyond repair.

 Do not operate the product near heat sources such as

radiators or other devices producing heat.

 Do not operate the product near open ﬂames.

 The product is not designed for use in rooms with high

temperatures or humidity (i.e bathrooms) or those in which a

great amount of dust is generated.

 Do not expose the product to extremely high temperatures.

This applies in particular if you are thinking about storing

the product in your car. Over a prolonged period of time,

the car and the glove compartment could become extremely

hot. Remove electric and electronic devices from the car.

 Do not use the product immediately after it has brought

from a cold room to a warm room. Allow the product to

acclimatise before you switch it on.

US-EN 10

RISK OF PROPERTY DAMAGE

 Do not attach a metal object to the Qi charging surface.

 Do not charge when the Qi charging surface is covered with

a towel, layer of dust, etc.

 Do not allow the Qi charging surface to get wet from water,

beverages, etc.

 Do not use the Qi charging surface if it is malfunctioning.

 Immediately switch the product oﬀ and remove the charging

cable from the product if you smell burning or see smoke.

Have the product examined by a qualiﬁed technician before

using it again.

 Do not subject the Qi charging surface with a strong forces

or impact. Failure to do so may result in damage, injury

and/or malfunction.

 Do not place magnetic recording media inside the charging

area during charging. The magnetism generated may erase

the data on credit cards. It may also cause wristwatches and

other precision instruments to malfunction.

 During charging and immediately after charging, the Qi

charging surface and mobile device will be warm. This is

normal and not a malfunction. If there is an unusual heating,

check the Qi charging surface and mobile device.

 Always place only one mobile device to charge on the Qi

charging surface. Only one device can be charged at a

time.

 Compatibility with all Qi devices cannot be guaranteed.

 Do not attach an anti-slip mat or stickers to the Qi charging

surface. The presence of an anti-slip mat or stickers between

the mobile device to be charged and the Qi charging

surface that may prevent charging start.

Andere Handbücher für SQWP8000 1A1

Inhaltsverzeichnis

Sprachen:

Andere Silvercrest Zubehör Handbücher

Silvercrest

Silvercrest 60113 Bedienungsanleitung

Silvercrest

Silvercrest SWUB 85 C2 Produktinformationsblatt

Silvercrest

Silvercrest SPBW 3000 A1 Bedienungsanleitung

Silvercrest

Silvercrest STK 36 B2 Technische Daten

Silvercrest

Silvercrest 284705 Bedienungsanleitung

Silvercrest

Silvercrest 311667 1904 Bedienungsanleitung

Silvercrest

Silvercrest HG01041B Technische Daten

Silvercrest

Silvercrest 91210 Bedienungsanleitung

Silvercrest

Silvercrest SAD 12 F5 Anleitung zur Verwendung

Silvercrest

Silvercrest SPBD 5000 A1 Bedienungsanleitung

Silvercrest

Silvercrest B69PF Bedienungsanleitung

Silvercrest

Silvercrest SPPD 20000 A2 Bedienungsanleitung

Silvercrest

Silvercrest SAD 12 A1 Bedienungsanleitung

Silvercrest

Silvercrest 96963 Bedienungsanleitung

Silvercrest

Silvercrest SPB 10000 A1 Bedienungsanleitung

Silvercrest

Silvercrest SAD 3D 12 A1 Bedienungsanleitung

Silvercrest

Silvercrest STK 17 A1 Technische Daten

Silvercrest

Silvercrest STK 17 A1 Technische Daten

Silvercrest

Silvercrest KH 206 Bedienungsanleitung

Silvercrest

Silvercrest SPBW 3000 A1 Bedienungsanleitung

Silvercrest

Silvercrest STK 36V2 A1 Bedienungsanleitung

Silvercrest

Silvercrest SPBL 8000 A2 Bedienungsanleitung

Silvercrest

Silvercrest SEM 120 A1 Bedienungsanleitung

Silvercrest

Silvercrest SPB 10000 A1 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung