Simrad ITI TRAWL SYSTEM - SERIAL DATA COMMUNICATION REV... Bedienungsanleitung

Simrad ITI Trawl System

Serial data communication and

NMEA 0183 message description

111110 10 00 1010101010

01010100100010100011

01010101000101010100

10101001100001111.................

Instruction manual

Simrad ITI Trawl system

Serial data communication and

NMEA 0183 message description

Instruction manual

857--164777 / Rev.A

Note

Simrad AS makes every effort to ensure that the information contained within this

document is correct. However, our equipment is continuously being improved and

updated, so we cannot assume liability for any errors which may occur.

Warning

The equipment to which this manual applies must only be used for the purpose for which

it was designed. Improper use or maintenance may cause damage to the equipment or

injury to personnel. The user must be familiar with the contents of the appropriate manuals

before attempting to operate or work on the equipment.

Simrad AS disclaims any responsibility for damage or injury caused by improper

installation, use or maintenance of the equipment.

E2003 Simrad AS

ISBN 82-8066-013-5

The information contained within this document remains the sole property of Simrad AS.

No part of this document may be copied or reproduced in any form or by any means, and

the information contained within is not to be communicated to a third party, without the

prior written consent of Simrad AS.

Support

For support on your Simrad equipment, consult your local dealer, visit www.simrad.com,

or contact us directly at [email protected].

Simrad AS

Strandpromenaden 50

Box 111

N-3191 Horten

Telephone: +47 33 03 40 00

Facsimile: +47 33 04 29 87

A L W A Y S A T T H E F O R E F R O N T O F T E C H N O L O G Y

Instruction manual

857-164777 / A

Sections

This book is the Instruction manual manual for the ITI system.

1INTRODUCTION

2ITI TRAWL SYSTEM, BASIC PRINCIPLE

3ITI GEOMETRY FOR TWIN RIG

4 RESPONSIBILITY

5 SERIAL LINES

6 NMEA 0183 MESSAGES, DEFINITIONS

7NMEA–

ABBREVIATIONS, ITI AUX MENU SELECTIONS

(Cd6911)

M/S simrad Echo, our research and demonstration vessel

Simrad ITI

II 857-164777 / A

Remarks

References

Further information about the ITI system supplied may be found in the following manuals:

•ITI Installation manual

•ITI Trawl Eye Instruction manual

Instruction manual

III

857-164777 / A

Contents

1INTRODUCTION 1..........................................

2 ITI TRAWL SYSTEM, BASIC PRINCIPLE 2................

3ITIGEOMETRYFORTWINRIG 3..........................

4 RESPONSIBILITY 5........................................

5 SERIAL LINES 6............................................

Transmitted messages 6..........................................

Received message 8.............................................

Serial line configuration and pin allocations 9.........................

Serial port pin assignments 10......................................

6 NMEA 0183 MESSAGES, DEFINITIONS 11.................

Message description 11............................................

NMEA output from ITI 12.........................................

NMEA Input to ITI 23.............................................

Telegram from Winch Syncro 2020 25...........................

7 NMEA – ABBREVIATIONS, ITI AUX MENU SELECTIONS 26

Simrad ITI

IV 857-164777 / A

Document logistics

Rev Date Written Checked Approved

A23.09.03 GM KRA KRA

(The original signatures are recorded in the company’s logistic database.)

Rev Comments

AOriginal issue.

To assist us in making improvements to the product and to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing or by e-mail - to:

Simrad AS

Documentation Department

P.O.Box 111

N-3191 Horten

Norway

or e-mail:

simrad.documentation@simrad.com

Instruction manual

857-164777 / A

1INTRODUCTION

Note This document is intended for software engeneers. It is to be used

for writing codes in order to communicate with the ITI system.

With the rapid development of marine electronic devices, it has

become necessary to develop a standardised interface protocol for

exchanging data between devices regardless of the device

manufacturer. The NMEA 0183 standard protocol for interfacing

electronic marine deviceshas been implemented in the ITIsystem.

The most common way of connecting electronic equipment is to

use serial lines.

A more powerful way of integrating, is the Ethernet standard with

higher signalling capacity. The software required to communicate

over the Ethernet is included in the ITI system, however a standard

ITI does not include the hardware required.

A dedicated interface/display board containing the Ethernet

hardware must be installed.

→Please refer to the Simrad ITI Installation Manual, Appendix 1

page 3 – 17 for more details.

The ITI system has four serial lines available for external

equipment connection.

→Please refer to page 6 for more details.

Simrad ITI

2857-164777 / A

2 ITI TRAWL SYSTEM, BASIC PRINCIPLE

The Simrad ITI wireless trawl positioning and monitoring system

is designedto improvecontrol andefficiency inpelagic andbottom

trawling. Small robust battery powered sensors mounted on the

trawl, transmit important information to the vessel on request.

•The ITI provides the skipper with exact position of the gear and

what is happening in and around the trawl. It also provides all

crucial information for an effective, profitable and responsible

fishing.

•The ITI is a modular system. From a basic unit of one sensor,

the ITI system can be extended to a complete and advanced

instrument package according to the customers requirements.

Distance and

Speed sensor

Trawl Eye

Depth and

Temperature Sensor

Catch Sensor

Simrad’sphilosophy isto reduce integration costsand increase the

benefit of our products to let data from the ITI be available for

integration with external equipment like chart plotters, winch

control systems etc.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Simrad Schiffsausrüstung Handbücher

Simrad

Simrad ME70 - REV C Bedienungsanleitung

Simrad

Simrad AI80 Bedienungsanleitung

Simrad

Simrad ES60 - DATASHEET REV A Bedienungsanleitung

Simrad

Simrad EQ33 Bedienungsanleitung

Simrad

Simrad ES60 - DATASHEET REV A Bedienungsanleitung

Simrad

Simrad FU80 Bedienungsanleitung

Simrad

Simrad RF25 Bedienungsanleitung

Simrad

Simrad IS20 Combi Bedienungsanleitung

Simrad

Simrad EM - TECHNICAL NOTE 2000 Bedienungsanleitung

Simrad

Simrad GC80 EXPANDED Bedienungsanleitung

Simrad

Simrad AP48 Bedienungsanleitung

Simrad

Simrad EK80 Bedienungsanleitung

Simrad

Simrad SimNet Kurzanleitung

Simrad

Simrad IS42J Bedienungsanleitung

Simrad

Simrad NL - SPEED LOG REV C Bedienungsanleitung

Simrad

Simrad Navico WP10 Bedienungsanleitung

Simrad

Simrad RS25-E Bedienungsanleitung

Simrad

Simrad NSO evo3S MPU Bedienungsanleitung

Simrad

Simrad IS20 Combi Bedienungsanleitung

Simrad

Simrad ITI Bedienungsanleitung

Simrad

Simrad EY500 Bedienungsanleitung

Simrad

Simrad GN70 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Simrad

Simrad Mercury Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung

olympia electronics

olympia electronics ΒS-532/WP Bedienungsanleitung