4
Bilge Pump Sensor
Monitor bilge-pump activity and receive alerts
if your boat is taking on water.
There are two ways for the wireless sensor to
monitor bilge pump activity:
1.
Connect the Positive(+) and Negative(-)
leads from the sensor directly to the
Positive(+) and
Negative(-) leads off
your bilge pump.
2.
Connect the Positive(+) and Negative(-)
leads
from the sensor directly to the bilge
indicator light at your helm.
Secure the sensor by using the supplied
Mounting Bracket or Adhesive Strip.
Insert the Bilge Pump Tail into the wireless
module and tighten the two hex screws.
Pair the Wireless Module to the MTC unit.
Note: This sensor is polarity sensitive.
