4
SC404 - Capacitive
Level Sensor
The SC404 is a capacitance continuous level transmitter with an
integrated electronics module mounted within the housing. This 2 wire
loop powered unit provides a 4-20mA output (galvanically isolated).
Set up and calibration is achieved with a zero and span adjustment
which works best when starting with an empty tank to set the zero and
then filling it to set the span. This flexible level measurement device
works well in many industrial processes and process media including
a variety of liquids, powders and pastes. The SC404 is made with
316SS rigid rods or 316SS cables (coatings are required for
conductive mediums) and can also be made with a secondary
reference rod or reference sheath built into the process connection.
The wide range of applications for RF analog level measurement
probes (such as liquids, pastes, solids and granules), requires
attention in selecting the correct configuration and installing it in the
proper location. To cater to all applications, Sitron's probes are offered
with different designs and features.
Wide range of applications/industries:
i.e. water, oils, corrosives, solids, powders, grains, etc.
Accurate and reliable measurement
No moving parts - Rugged construction
Can operate at high temperatures and pressure
Functions on conductive as well as non-conductive medias
Galvanic Isolation
Features
Introduction
Sitron-USA - Phone (516) 935-8001 / Fax (800) 516-1656
