Skandia Elevator L Series Technische Daten
MAINTENANCE INSTRUCTIONS
L/I/H-LINE
Conveyors
ZSA030GB 2018-11-01
SKANDIA ELEVATOR
Your conveyor system must be assembled correctly and maintained
thoroughly if it is to operate satisfactorily. These maintenance instructions and
the separate assembly instructions for each machine must be followed for the
warranty to apply.
We hope you will be pleased with your Skandia conveyor equipment for a long
time.
Thank you for choosing Skandia Elevator!
Contents
Safety information...................................................................................................................4
Safety decals....................................................................................................................................................................6
Maintenance...................................................................................................................................8
General ...................................................................................................................................................................................8
Bearings.................................................................................................................................................................................8
Return rollers chain conveyors / Belt conveyor carrying idlers,
return idlers, snub idlers and tracking idlers...............................................................................8
Belt conveyor return idlers, snub idlers, tail pulley and drive pulley.............. 14
Transmission.....................................................................................................................................................................8
Conveyor chain...........................................................................................................................................................10
Conveyor belt................................................................................................................................................................12
Forward driving end, sweep conveyor...............................................................................................14
Troubleshooting...................................................................................................................... 16
Poor capacity/stop.................................................................................................................................................16
Machine noisy.............................................................................................................................................................18
Plastic ight bends.................................................................................................................................................18
Lid/bottom plate in bend section gets warm...........................................................................19
Motor stoppage..........................................................................................................................................................19
Belt conveyor misalignment ........................................................................................................................19
2-3 way valve leaking..........................................................................................................................................19
Technical specications............................................................................................... 20
Geared motor rating plate .............................................................................................................................20
Density table.................................................................................................................................................................20
L-Line..................................................................................................................................................................................... 21
I-Line .....................................................................................................................................................................................22
H-Line ..................................................................................................................................................................................23
4SKANDIA ELEVATOR
The owner of the transport equipment is responsible for these maintenance
instructions always being available to the maintenance technicians and
engineering technicians concerned.
Inadequate maintenance and/or defective handling may lead to personal
injury or damage to the conveyor equipment and/or other equipment. It can
also cause malfunctions or a reduction in capacity.
Read these maintenance instructions carefully before maintenance or
operation commences. If any part of these instructions should be difcult to
comprehend, please get in touch with your reseller for assistance.
The safety information is presented and interpreted as follows:
!
WARNING!
Disregarding instructions given in warnings can cause serious personal
injury or death.
!
IMPORTANT!
Ignoring the instructions given in important texts may cause damage
to the conveyor equipment and/or other equipment. It can also cause
malfunctions or a reduction in capacity.
NB! indicates that the text contains information that will simplify the
assembly process.
General
!
WARNING!
• Ensure that everyone responsible for assembly, electrical connection,
maintenance and operation of the conveyor equipment has read and
understood the instructions and safety information.
• Use protective gloves, helmet, steel-toed boots, ear defenders,
protective goggles and high-vis vest when carrying out assembly,
electrical connection, maintenance and operation of conveyor
equipment.
• Stop the machinery and turn off electric power before attempting any
type of assembly, electrical connection or maintenance work.
• Do not start the machinery without the lid, hatches, covers, guards and
connections fitted in such a way they can only be opened with tools.
Safety information
5
SKANDIA ELEVATOR
!
WARNING!
• All electrical equipment is to be connected by a qualified electrician.
See separate connecting directions for electronics.
• The power switch must be permanently mounted and located to allow
easy access when carrying out maintenance work.
• Ensure that sensors and switches for the pop up overloading flap/
inspection hatch (in the outlet hopper) & conveyor chain are active
when in operation. NB! Certain sensors/switches are optional
accessories only on certain machines.
Electrical connection
!
IMPORTANT!
• Ensure the motor protection is set to the correct ampere setting for the
motor.
Incorrect electrical connection may lead to personal injury or damage to the
conveyor equipment and/or other equipment. It can also cause malfunctions
or a reduction in capacity.
!
IMPORTANT!
• If the machine is being assembled outdoors, the motors and
transmissions must be fitted with a weather cover.
• If a machine or part thereof in any way needs moving/dismantling,
follow the directions given in the assembly instructions.
• The machine can be stopped and restarted when full of material but
this option must not be used for intermittent operation.
• If a short circuit should occur, ensure that the electrical equipment is
in working order before continuing operation.
• Ensure that the electrical equipment is kept free from dirt, dust,
moisture and electrostatic charge.
• The machine is not designed to stand or walk on.
!
WARNING!
• The sweep conveyor's conveyor chain and forward driving wheel are not
fully built-in for functional reasons. Do not remain in the vicinity of the
machine while it is operating.
• The silo's centre and intermediate outlet hoppers are not protected for
functional reasons. Do not remain in the vicinity of the outlet hoppers
while the machine is operating.
• Connections to, from and between machinery must be permanently
mounted and fully enclosed. If the design of the installation does not
allow this at an outlet, finish off with a 1 m pipe.
• Ensure the machine is anchored and braced as described in the
assembly instructions.
6SKANDIA ELEVATOR
Safety decals
!
WARNING!
The machine is supplied with safety decals on delivery. They must not be
removed or defaced. If a safety decal becomes damaged, you can order a
new one free of charge from Skandia Elevator AB. Specify the part number
of the decal. See section below and the machine overview chapter in the
machine's assembly instructions.
There are safety decals for:
- Mandatory (white symbol on round blue background).
- Forbidden (black strike-through symbol on round white background with red
surround).
- Warning (black symbol on triangular yellow background with black surround).
Skandia Elevator machines may have the following safety decals:
!
WARNING!
The mandatory instruction, forbiddance or warning given on all safety decals
must be considered or serious injury or death may follow.
Part number/Safety decal
Refer to the "Machine Overview" chapter
for location.
Written denition
DEK3090 Read the "Back stop" section in the
elevator's assembly instructions before
test starting the motor for the rst time.
DEK3100 Do not place the valve with the motor
side face down.
DEK3140 Changing settings and equipment is
prohibited.
DEK3030 Warning for conveyor chain!
DEK3060 Warning for bucket belt!
S
K
A
N
D
I
A
E
L
E
V
A
T
O
R
–
D
E
K
3
0
9
0
SKANDIA ELEVATOR - DEK3030
SKANDIA ELEVATOR – DEK3060
S
K
A
N
D
I
A
E
L
E
V
A
T
O
R
–
D
E
K
3
1
0
0
S
K
A
N
D
I
A
E
L
E
V
A
T
O
R
–
D
E
K
3
1
4
0
7
SKANDIA ELEVATOR
DEK3040 Warning for chain drive!
DEK3150 Warning for conveyor belt and idler!
DEK3070 Warning for rotating conveyor drive
shaft!
DEK3080 Warning for rotating elevator drive shaft!
Warning for moving machinery!
DEK3010 Warning for dust explosion!
DEK3130 Warning, maximum 2 persons = 200
kg/440 lbs may be on the platform and
ladders at one time!
SKANDIA ELEVATOR – DEK3040
SKANDIA ELEVATOR – DEK3070
SKANDIA ELEVATOR – DEK3080
SKANDIA ELEVATOR– DEK3125
SKANDIA ELEVATOR - DEK3010
SKANDIA ELEVATOR – DEK3130
MAX
200 440
/
=kg lb
SKANDIA ELEVATOR– DEK3120
SKANDIA ELEVATOR – DEK3110
DEK3110
DEK3120
DEK3125 DEK3160
SKANDIA ELEVATOR– DEK3160
SKANDIA ELEVATOR – DEK3150
8SKANDIA ELEVATOR
Maintenance
General
Check annually that the bolts are securely in place, that no components
are missing and that there is no rust on the machinery. Replace damaged
components.
!
IMPORTANT!
All maintenance instructions in this chapter must be considered as
important texts.
Bearings
NB! All bearings are greased-for-life and do not require additional lubrication.
Transmission
Geared motor / Angle gear motor
The geared motor is lled with mineral oil on delivery. For more information
on oil grade on delivery, see the separate information attachment from the
manufacturer Nord.
Check the oil level before taking into service and at regular intervals
thereafter.
Change oil every 10,000 operating hours or at least every other year.
The interval between changes can be doubled if synthetic oil is used. When
operating in severe conditions such as high humidity, aggressive environment
or large temperature variations, the oil must be changed more often.
Clean the gear when changing oil.
Return rollers chain conveyors / Belt conveyor carrying
idlers, return idlers, snub idlers and tracking idlers
Check rollers/idlers annually. Replace them immediately if they are worn.
Belt conveyor return idlers, snub idlers, tail pulley
and drive pulley
Ensure that material is not accumulated on return idlers, tail pulley, drive
pulley or the lower pulley in the discharge tripper. Check regularly and clean if
necessary. To reduce any problems, install a belt cleaner.
9
SKANDIA ELEVATOR
Chain transmission - L-line
Adjust the tightness of the transmission chains continuously.
Oil the transmission chains annually.
Change transmission chains before they become noticeably worn.
A
B
C
D
Tension the intermediate shaft (B) laterally with tensioning bolts (C) so that
the outer chain (D) is sufciently tight.
Tighten the motor bridge (A) by hand and secure it.
1.
2.
10 SKANDIA ELEVATOR
Conveyor chain
Chain tensioning
Check continuously that the conveyor chain is centred, is running freely and
is tensioned correctly. Check the rst time after 50 operating hours and then
according to the table:
L-line Once a season or at least every 200 operating hours.
I-line Twice a year or at least every 400 operating hours.
H-line 3 times a year or at least every 1000 operating hours.
!
IMPORTANT!
When transport takes place in both directions, the conveyor chain
tension must be checked twice as often.
On conveyors with return rollers, the conveyor chain tension is checked by
pressing it down between the two return rollers. If it can be pressed down
5-10 mm it is tensioned correctly.
On conveyors with intermediate trays/guide rails, the chain tensioning is
checked by pulling the conveyor chain sideways at the gear wheel in the tail
end. It is too taut if it cannot be pulled sideways. Release the tension until it
can be pulled slightly sideways.
5-10 mm
NB! If the lid and bottom plate of a bend section become warm during
operation then the conveyor chain is too taut.
NB! Make a test run after adjusting and then check again.
Andere Handbücher für L Series
1
Dieses Handbuch passt für folgende Modelle
24
Inhaltsverzeichnis
Andere Skandia Elevator Zubehör Handbücher
Skandia Elevator
Skandia Elevator I Series Bedienungsanleitung
Skandia Elevator
Skandia Elevator L Series Bedienungsanleitung
Skandia Elevator
Skandia Elevator BTI Bedienungsanleitung
Skandia Elevator
Skandia Elevator I Series Bedienungsanleitung
Skandia Elevator
Skandia Elevator I Series Bedienungsanleitung
