Instruction
Manual
(This Manual)
Specifications
Soft Cooler 11 / 18 / 38
FP-111R / FP-118R / FP-138R
Instruction Manual : Ver 1.00
Set Contents (Name of the Parts)
Material:Outside : PVC + Polyester
Insulation : Polyethylene Foam + Mirrored
Inside : PVC sheet / Other : polypropylene, resin, steel
Body Size
:
FP-111R:230×220×315mm、(9.1"×8.7"×12.4") stowed:360×310×120mm (14.2"×12.2"×4.7")
FP-118R:345×245×230mm、(13.6"×9.6"×9.1") stowed:500×270×120mm (19.7."×10.6"×4.7")
FP-138R:505×305×310mm、(19.9"×12.0"×12.2") stowed:510×335×155mm (20.1"×13.2"×6.1")
Weight:FP-111R
:
650g（22.9oz）
FP-118R
:
800g（28.2oz）
FP-138R
:
1,700g（60.0oz）
MADE IN CHINA
Before use: please read thoroughly to ensure safety and avoid accidents.
How to use
Thank you very much for purchasing a Snow Peak product. This product is a simple soft-sided cooler. To use this product safely and correctly, please read these instruc-
tions carefully. After reading these instructions, keep this manual in a safe place for future reference. If you find anything in the instruction manual that is difficult to
understand, or if you find a defect with the product, stop use immediately and contact the dealers where you purchased the product or Snow Peak Customer Service.
DANGER / Misuse could easily result in a serious accident or death.
WARNING / Improper use may result in death or serious injury.
CAUTION / Misuse could result in injury to the user and/or property damage.
●Wash with a mild detergent before using this product for the first time.●Do not store anything hard with a sharp tip in this product, as holes may form. ●Do not
leave this product near a fire. Additionally, do not store hot food or drinks in this product, as they may cause damage.●If you put too many heavy items in the contain-
er, it may be deformed and damaged. Please be mindful of the weight.●This product is a simple soft-sided cooler. Do not store food or drinks in this product for long
periods.●This product is not a thermal container, so please do not store warm items in it.●Do not use dry ice in this product as it may cause the fabric to deteriorate
or break.●Do not leave the product in a car or other places subject to high temperatures. High temperature may cause deterioration or damage.●If the product is
used in a wet area or is left wet for long periods, there is a risk of color staining.●Do not use this product to carry water. It may leak from the seams.●If food or drink
adheres to the inside of the product, there is a risk of color staining.
●Before use, check the product to ensure there are no abnormalities. If any abnormalities are found, immediately stop using the product, then contact the dealer
where the product was purchased or Snow Peak Customer Service for inspection or repair.●Use caution when storing breakable or glass items in this product. If a
glass bottle breaks inside the product, it is very dangerous because the glass will stick to other items or the product itself.●Do not put too many heavy objects in this
product. This increases the risk of a fall or accident when carrying the product.
●Please do not let small children put the product over their heads or attempt to climb inside. Doing so may cause suffocation and unexpected accidents.●Please
use this product out of the reach of children to avoid accidents.●Please do not allow pets to climb into this product, doing so may cause suffocation.
Maintenance
●If this product has not been used for a long period, please check each part for abnormalities before using it again. ●Afteruse,washwithamilddetergentwithsoftsponge.
Removemoisturewithacloth,andthendryinacoolplaceawayfromhightemperatureandsunlight.●Donotstoreinwetcondition.Itmaycausemoldandagingdeteriora-
tion.●Do not rub with abrasive objects such as metal scrubbing brush.
The specifications of Snow Peak products are based on field testing and quality control to ensure the correct function and longevity of every product. If apparent defects in the
manufacturing of the product are found, the defective product will be repaired or exchanged free of charge. Damages, as follows, are not covered under warranty. 1．Material
deterioration caused by age. 2. Damage caused by modifications or rough handling. 3. Damage caused by improper use not following the instruction manual. 4. Damage caused
by unexpected accidents. 5. Damage not caused by defects in the manufacturing process. 6. Damage caused by dust or rust. 7. Damage or defects caused when dismantling
the product. 8. Damage and defects caused by dropping or other shocks to the product. 9. Deterioration or failure of parts due to friction. 10. Damage caused by the use of the
product in combination with other maker’s products.
Warranty
●If a professional repair is necessary, please contact the dealer where the product was sold or Snow Peak Customer Service.
●Please dry and clean the product before sending it for repair. ●Please stick a memo onto the damaged area of the product. In
the memo, include details explaining the circumstances that led to the damage. ●The cost of repair will be determined as follows:
1．If the damage is subject to warranty, transportation cost (both ways) and repair cost will be covered by Snow Peak. 2．If the
damage is not subject to warranty, transportation cost (both ways) and repair cost will be covered by the customer.
Regarding Repair
【Standardcontent】
FP-111R：Approx. 2.4 gal.
FP-118R：Approx. 3.2 gal.
FP-138R：Approx. 8.8 gal.
①Assemble the product and open the zipper.
②Place something that needs to be kept cool into
the container, then add ice or a refrigerant.
③Close the zipper and
transport. The product may
be damaged if it is closed
forcefully, so please only
use it within the recom-
mended capacity.
* 11L (2.9 gals),18L (4.7 gals)
only: Carry the product by
usingtheshoulderstrap.
④After use, open the zipper and fold down the
cooler for compact storage.
* 38L (10 gals) only: Bundle the handle ①and secure it
with Velcro. When the weight is significant, it can be
carried stably by two people, each holding a handle ②.
Handle①Handle②
11(2.9 gal),18L(4.7 gal) 38L (10 gal)
Zippers
Shoulder Strap
Handle①Handle②
