Socket 7X Bedienungsanleitung

Socket

Bluetooth®Cordless Hand Scanner

7X and 7XRx

Bluetooth Human Interface Device (HID) Mode

User’s Guide

6/2010 Document # 6410-00233 C

Socket, the Socket logo, Battery Friendly, Socket Bluetooth Cordless Hand Scanner,

SocketCare, Mobility Friendly, SoMo, ActivePairing and Error Proof Protocol are

trademarks or registered trademarks of Socket Mobile, Inc. Bluetooth and the

Bluetooth logos are registered trademarks owned by Bluetooth SIG, Inc., U.S.A. and

licensed to Socket Mobile, Inc. All other brand and product names are trademarks of

their respective holders.

The Socket Bluetooth Cordless Hand Scanner includes technology licensed under

United States Patent Numbers 5,902,991, 7,429,000 B1 and D526,320 S.

Reproduction of the contents of this manual without the permission of Socket

Mobile is expressly prohibited. Please be aware that the products described in this

manual may change without notice.

Feel free to contact Socket Mobile at:

Socket Mobile, Inc.

39700 Eureka Drive

Newark, CA 94560-4808

USA

Other than the above, Socket Mobile can assume no responsibility for anything

resulting from the application of information contained in this manual.

Please refrain from any applications of the Socket Bluetooth Cordless Hand Scanner

that are not described in this manual. Please refrain from disassembling the

Bluetooth Cordless Hand Scanner. Disassembly of this device will void the product

warranty.

You can track new product releases, software updates and technical bulletins by

visiting the Socket Mobile website at: http://www.socketmobile.com.

TABLE OF CONTENTS

1 | INTRODUCTION 4

SCANNER VERSIONS 4

PACKAGE CONTENTS 4

PRODUCT REGISTRATION 4

SOCKETCARE™SERVICE PROGRAM 5

ACCESSORIES 5

SOCKET THIRD-PARTY ACCESSORIES RECOMMENDATION (STAR) 5

ADDITIONAL DOCUMENTATION 5

2 | HARDWARE PREPARATION 8

CHARGING THE SCANNER 8

ATTACHING THE TETHER 9

BASIC FUNCTIONALITY 10

3 | SETUP FOR WINDOWS 7, VISTA, AND XP 11

4 | SETUP FOR WINDOWS MOBILE 18

5 | SETUP FOR APPLE 22

6 | COMMAND SHEET 25

DEFAULT SYMBOLOGIES –SAMPLE BARCODES 25

SYMBOLOGY CONFIGURATION 27

APPENDICES

A SPECIFICATIONS 35

B SAFETY AND USAGE TIPS 37

C BARCODE LABEL SPECIFICATIONS 39

D DECODE ZONE 40

E TROUBLESHOOTING 41

F TECHNICAL SUPPORT 44

LIMITED WARRANTY 45

REGULATORY COMPLIANCE 47

1 | INTRODUCTION

Thank you for purchasing the Socket Bluetooth Cordless Hand Scanner

(Bluetooth CHS) 7X or 7XRx. The Socket Bluetooth CHS combines the power of

2D and 1D barcode scanning with the convenience of Bluetooth wireless

technology so you can collect barcode data without being tied to your mobile

or desktop computer.

Compact, lightweight, and ergonomically designed to fit comfortably in a

hand, the Socket Bluetooth CHS is ideal for high volume data collection

applications. It features a ruggedized exterior that is water, dust and shock

resistant and withstands multiple drops to concrete.

SCANNER VERSIONS

Model Part Number Antimicrobial

Plastics

Bluetooth Profile

Support

7X 8550-00036 No HID only

7XRx 8550-00047 Yes HID only

7X 8550-00054 No HID and SPP

7XRx 8550-00055 Yes HID and SPP

Bluetooth Serial Port Profile (SPP) is covered in a separate manual:

http://www.socketmobile.com/pdf/data-collection/chs-series7_ug.pdf

PACKAGE CONTENTS

•1 Socket Bluetooth Cordless Hand Scanner

•1 Rechargeable Li-ion Battery installed (DO NOT REMOVE)

•1 Lanyard/belt clip with retractable tether

•1 Charging cable (Cradle not included)

PRODUCT REGISTRATION

Socket highly recommends that all customers register their products. Registered

users receive priority for technical support and can choose to obtain special offers,

upgrades, and new product information. Register online at:

http://support.socketmobile.com

SOCKETCARE™SERVICE PROGRAM

SocketCare is an enhanced service program that supports deployments of the

Bluetooth CHS with faster technical support, faster repair and replacement, and the

option for full coverage. For more information, please visit:

http://www.socketmobile.com/socketcare

ACCESSORIES

Charging accessories and Bluetooth adapters from Socket are available online

at: http://ww1.socketmobile.com/products/bluetooth-scanners/accessories-

bt1.aspx

SOCKET THIRD-PARTY ACCESSORIES RECOMMENDATION (STAR)

The Socket STAR program features accessories such as protective seals and

carrying cases for the Bluetooth CHS. For more information, please visit:

http://ww1.socketmobile.com/products/star.aspx

ADDITIONAL DOCUMENTATION

Download the latest documentation, including the Quick Start Guide, online at:

http://www.socketmobile.com/support/downloads/

IMPORTANT! This manual only covers the Bluetooth CHS in Bluetooth

Human Interface Device (HID) Mode.

If you purchased a version of the Bluetooth CHS 7X or 7XRx that also

supports Bluetooth Serial Port Profile (SPP), please refer to the general

Bluetooth CHS user’s guide for instructions on using SPP:

http://www.socketmobile.com/pdf/data-collection/chs-series7_ug.pdf

CHAPTER 1: INTRODUCTION 5

HARDWARE FEATURES

Product Diagram

Status indicator LED

Protective

rubber

bumper Trigger button

Power button

Stylus tip

Touch Screen Stylus

The Socket Bluetooth CHS features a stylus tip in the tail of

the Bluetooth CHS that you can use on Pocket PC and other

device touch screens.

WARNING: Do not use the stylus if damaged. A

damaged stylus may scratch the display screen of your

computer.

Note: The stylus does not work with tablets using Active Matrix displays.

Antimicrobial Protection

The Socket Bluetooth CHS 7XRx is made with antimicrobial materials to provide

an extra layer of protection to the device against the multiplication and spread

of potentially harmful bacteria and microbes.

•Socket recommends using Sani-Cloth® Plus brand disposable cloth wipes as

the standard disinfectant wipe for the Bluetooth CHS 7XRx.

Do not use a bleach-based or Dispatch® brand cloth wipes, as they negate

all antimicrobial properties that have been added to the device.

CHAPTER 1: INTRODUCTION 7

Status Indicator LED

LED LED Behavior Meaning

1 blink per second Bluetooth radio is on, but not

connected

Bluetooth Status (Blue)

1 blink per 3 seconds Scanner connected to computer

Good Read (Green) On Data successfully scanned and

transmitted to host device

On when connected

to charging source

Scanner is fully charged

1 blink per second 20% battery capacity remaining

On when connected

to charging source

Battery Charging (on cradle or

AC power)

Battery Status (Red)

Off Powered off or Good Battery

status

Status Indicator Beeps

Beep Patterns Meaning

2 beeps (low-high) Power on

2 beeps (high-low) Power off

1 beep Scanner connected to computer. When connected, the

scanner will auto power off after 2 hours of inactivity.

2 beeps (same tone) Scanner disconnected from computer. When

disconnected, the scanner will auto power off after 5

minutes of inactivity.

2 long beeps (same tone) Scanner unsuccessfully tried 10 times to connect to

computer. After these attempts, the scanner will go

into sleep mode and power off after 5 minutes of

inactivity.

1 beep with green LED Data successfully scanned and sent to computer.

5 consecutive tones The scanner detects an internal fault and will reset

itself. If the scanner is connected to a host computer,

it will disconnect during the reset.

2 | HARDWARE PREPARATION

CHARGING THE SCANNER

Charge the internal battery by using the included cable. The scanner must be

fully charged before its first use.

WARNING: Do not remove the pre-installed battery!

The LED will emit a solid red light while charging and turn green

when the battery is fully charged. The LED will flash red every

second when the battery is less than 20% charged.

The adapter rating is 5V, 2A, positive pole center. A new, fully

charged battery lasts ~10 hours under normal usage conditions. The

power jack fits a 4mm barrel connector.

Optional Charging Accessories:

Available separately at: http://ww1.socketmobile.com/products/bluetooth-

scanners/accessories-bt1.aspx

Charging Cradle

SKU# AC4026-708

Charging Cradle, Antimicrobial

SKU# AC4050-1152

USB to DC Plug Charging Cable

SKU# AC4051-1192

Mobile Power Pack

(available in Americas and Asia

Pacific)

SKU# AC4050-1152

AC adapter with international

plugs

SKU# GP0815-447

DC charger

SKU# HC1630-882

You can also charge the scanner with AC and DC adapters of the

Socket SoMo®650 handheld computer. Use Socket recommended

chargers only. Using other chargers may damage your scanner and

will void your warranty.

ATTACHING THE TETHER

1. Use a coin or screwdriver to unlock and remove the battery cover. Turn

the lock underneath the scanner to a horizontal position to unlock.

2. Remove the battery cover. Make sure you do NOT remove the battery.

The Bluetooth Device Address is printed on a label inside the battery

compartment. The address is used to identify the Bluetooth CHS.

3. Wrap the string loop of the tether around the inside part of the lock on

the battery cover.

4. Replace the battery cover and turn the lock to a vertical position to

secure it.

5. If desired, attach the tether to a lanyard or belt.

CHAPTER 2: HARDWARE PREPARATION 9

BASIC FUNCTIONALITY

Function Procedure

Powering on /off

Power On: Press and hold down the power button until you

hear two (low-high) tones.

Power Off: Press and hold down the power button until you

hear two (high-low) tones.

Scanning barcodes

Press and hold the trigger button to activate the scanner. An

aiming beam will appear for 3 seconds. Position the red

aiming beam over the 2D (or 1D) barcode. The CHS will beep,

flash a green LED, and vibrate to confirm the barcode was

decoded and data recorded in your application.

Enabling/ Disabling

Symbologies Please refer to the Command Sheet in Chapter 5.

Modifying Scanner

Mode Please refer to the Command Sheet in Chapter 5.

Data Editing Please refer to the Command Sheet in Chapter 5.

Disconnecting Disconnect through your device’s Bluetooth software or

simply turn off the CHS.

Factory Reset

Reverts CHS back to factory default state. You can do this to

remove a pairing or revert to the default Bluetooth device

class (keyboard for Windows, “other” for iPad).

1. Power on CHS

2. Press and hold down the Trigger button and momentarily

press the Power button while still holding down the

Trigger button.

3. After 15 seconds, the scanner will beep. Release the

Trigger button.

4. The scanner will beep 5 times and power off.

5. The next time you power on the scanner, it will take

longer than normal. After the scanner finishes powering

on, it will have factory default settings.

Pairing Reset

Releases the Bluetooth pairing from the last system the CHS

was paired to. This allows new pairing to another system.

1. Power on CHS

2. Press and hold down the Trigger button and press the

Power button until you hear a series of 3 tones.

Retrieving Scanner

and Firmware

Information

1. Power on the scanner and pair via Bluetooth with system.

2. Open Notepad or Notes application and set cursor in

application.

3. Press and hold down the trigger button for 15 seconds or

until data outputs in text into Notepad/Notes application.

Andere Handbücher für 7X

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Socket Scanner Handbücher

Socket

Socket 7X Bedienungsanleitung

Socket

Socket Bluetooth iPAQ Bedienungsanleitung

Socket

Socket CHS 7DiRx Installationshandbuch

Socket

Socket CHS Series 7 Bedienungsanleitung

Socket

Socket CHS 7DiRx Bedienungsanleitung

Socket

Socket CHS 8Ci Bedienungsanleitung

Socket

Socket CHS 7XiRx Bedienungsanleitung

Socket

Socket DURASCAN 800 Series Bedienungsanleitung

Socket

Socket 7X Bedienungsanleitung

Socket

Socket 7X Bedienungsanleitung

Socket

Socket CHS 7Ci Bedienungsanleitung

Socket

Socket CHS 7Xi Bedienungsanleitung

Socket

Socket CF RFID Reader-Scan Card Series 6 Bedienungsanleitung

Socket

Socket Cordless Ring Scanner Series 9 Bedienungsanleitung

Socket

Socket DURASCAN D800 Series Bedienungsanleitung

Socket

Socket Cordless Hand Scanner Bedienungsanleitung

Socket

Socket Cordless Ring Scanner Series 9 Bedienungsanleitung

Socket

Socket CompactFlash Scan Card Series 5 Bedienungsanleitung

Socket

Socket CRS Series 9 Bedienungsanleitung

Socket

Socket CHS Series 7 Bedienungsanleitung

Socket

Socket Secure Digital Scan Card Series 3 Bedienungsanleitung

Socket

Socket 1D Bedienungsanleitung

Socket

Socket Secure Digital Scan Card Series 3 Bedienungsanleitung

Socket

Socket Cordless Ring Scanner Series 9 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung