8
EN
8
4. Safety instructions
4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for the safe delivery condition of the product, including the operating manual and the
original accessories.
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of his
personnel, their training and the operational safety of the product.
The operator understands the safety information which is stated on the product and
the instructions in the operating manual.
The operator shall comply with the standard local regulations relating to safety and accident preven-
tion regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits
(see Chapter 3/Technical data)
.
Use under extreme temperature fluctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The VECTOR 50 is suitable for continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
Inform the local safety authorities and safety experts before working in hazardous environments, in
close proximity to electrical installations or similar surroundings.
