Soleus Air GM-WAC-06SE-C Bedienungsanleitung

Models

GM-WAC-06SE-C

GM-WAC-06ESE-C

GM-WAC-08ESE-C

Electronic Window Air Conditioner

Operating Instructions

Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will

provide you with valuable information necessary for the proper care and maintenance of your new

product. Please take a few moments to thoroughly read the instructions and familiarize yourself with

all the operational aspects of your new air conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT SAFETY INSTRUCTIONS

Before installing and using your air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference. Your safety and the safety of others is very important to

us. Please pay attention to all safety messages outlined in this owner’s manual.

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow

the following basic precautions:

This is a safety alert symbol.

This symbol alerts you to potential hazards that can harm you or others or even cause

death.

All safety messages will directly follow the safety alert symbol and/or the words

“DANGER” or “WARNING”.

Failure to immediately follow these

instructions may cause serious injury

or even death.

All Safety messages alert you of potential hazards, how to reduce the chance of injury,

and what can happen if instructions are not followed correctly.

• Plug into a grounded 3 prong outlet.

• Do not remove the ground prong.

• Do not use a plug adapter.

• Do not use an extension cord.

• Unplug the air conditioner before servicing

• Use two or more people to move and install the air

conditioner

Recommended Ground Method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power

supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong

outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus-

tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

LCDI Power Cord and Plug

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that is required

by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is damaged

and leakage occurs, power will be disconnected from the unit.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1. Plug power cord into a grounded 3 prong outlet

2. Press RESET (on some units a green light will turn on).

3. Press the TEST Button, the circuit should trip and cut all power to the air conditioner (on some units a green light

may turn off.

4. Press the RESET button for use. You will hear a click and the A/C is not ready for use.

NOTES:

• The RESET button must be engaged for proper use.

• The power supply cord must be replaced if it fails to trip when the TEST button is pressed and the unit fails to reset.

• Do not use the power supply cord as an ON/OFF switch. The

power supply cord is designed as a protection device.

• A damaged power supply cord must be replaced with a new

power supply cord from Soleus Air Powered by Gree.

• The power supply cord contains new user serviceable parts.

Opening the tamper-resistant case voids all warranty and per-

formance claims.

NOTE: Your units power cord and plug may differ from the one

shown.

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong.

Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock

The electrical ratings for your air conditioner are listed on the model and serial

number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the

requirements below for the type of plug on the power supply cord.

Power Supply Cord

• 115 volt (103.5 min.—126.5

max)

• 0-12 amps

• 15-amp time-delay fuse or

circuit breaker

• Use on single outlet circuit only

Wiring Requirements

It is the customer’s responsibility:

• To contact a qualified electrician

• To assure that the electrical installation is adequate

and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and

ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

PACKING LIST

2/5”

Screw (4) Sash Lock (1)

4/5”

Screw (6)

Packing List:

• Window Air Conditioner

• Remote Control

• AAA Batteries (2)

• Top Mounting Rail

• Top Mounting Rail Seal Strip

• 2/5” Screw for Top Mounting Rail (4)

• Accordion Panels (Left & Right)

• Sash Lock (1)

• Window Sash Seal

• 4/5” Screw for Window Locking Bracket & Accordion

Panels (6)

• Foam Top Window Gasket

• Owner’s Manual

SPECIFICATIONS

• Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE

PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT

TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

Model GM‐WAC‐06SE‐CGM‐WAC‐06ESE‐CGM‐WAC‐08ESE‐C

EnergyStar No Yes Yes

PowerSupply(Ph/V/Hz) 1/115/60 1/115/60 1/115/60

RatedCoolingCapacity(BTU/h) 6,300 6,300 8,000

CoolingPowerInput(Watts) 590 590 740

RatedCurrentCooling(Amperage) 5.3 5.3 7.1

CoolingEER 10.7 10.7 10.8

NoiseLevelH/M/L[dB(A)] 56/55/54 56/55/54 58/56/54

AirFlowH/M/L(CFM) 190/180/170 190/180/170 195/183/170

DehumidifyingCapacity 30Pintsperday 30Pintsperday 40Pintsperday

ProductDimensions(W"xH"xD") 18.625x12.75x15.75 18.625x12.75x15.75 18.625x12.75x15.75

ProductWeight(lbs) 46 46 50

RefrigerantType R‐410A R‐410A R‐410A

INSTALLATION & ASSEMBLY INSTRUCTIONS

Some assembly is required for your new air conditioner. Please read and follow these instructions carefully.

1. This air conditioner is designed to be installed in a

standard double-hung window with a window width

between 22” and 36” (559 mm - 914 mm).

2. The air conditioner can be installed without the

accordion panels to fit in a narrow window opening.

See the window dimensions.

3. The Lower Sash (the lower part of the window that

moves up and down) must allow for 13.25” of vertical

clearance when open. (See FIG. 1).

4. All supporting parts must be secured to firm wood,

masonry, or metal.

5. The electrical outlet must be within reach of the power

cord.

NOTE: Save the product packaging and installation instruc-

tions for future reference. Store the air conditioner in the

product box when not in use for an extended period of time.

FIG. 1

When handling the unit, be careful to avoid cuts from

the sharp metal edges and aluminum fins on the front

and rear coils.

22" to 3 6"

559mm to 914mm

13 1/4"

(337mm)

TOP RAIL INSTALLATION

NOTE: Top Rail and the side Sliding Panels are offset to provide the proper pitch to the rear of (5/16”). This is necessary

for proper condensation utilization and drainage. If you are not using the side panels, the rear pitch must still be main-

tained.

1. Remove the backing from the top mounting rail seal strip and attach the seal strip to the bottom of the top rail. Align

along the front edge.

2. Attach the top rail onto the top of the outer case using the four 2/5” screws.

ASSEMBLY & INSTALLATION (CONT.)

Placing the Unit Inside a Normal Window

1. Place the air conditioner on the sill with the bottom

mounting rail against its back edge. Center the air con-

ditioner and close the window securely behind the top

mounting rail. The air conditioner should be slightly

tilted to the outside area. Use a level; about a 1/3 bub-

ble will be the correct case slant to the outside. (See

FIG. 5 & FIG. 6)

2. Once the air conditioner is placed, extend both the left

and right accordion panels to the width of the window

SEE FIGURE 7).

3. Drive 4/5” screws into the top of the accordion panel

frame and the top rail to securely attach the window air

conditioner to the lower sash. (See FIG. 8 )

Accordion Panel Installation

Now that you have installed the top rail, you can now install

the accordion panels on each side.

1. Place the air conditioner on a hard flat surface.

2. Locate the accordion panels in the box.

3. Gently pull the free end of the accordion panel (See

FIG. 2). Do this for both panels.

4. Slide the free end of the accordion panel into the side

panel of the air conditioner (See FIG. 3 & 3A). Do this

for each side.

5. Once the accordion panels are slid into place, make

sure you leave enough space to slip on the top and

bottom rails (See FIG. 4). Now, slide the top and bot-

tom of the side panels inside top and bottom rails (See

FIG. 4A). Adjust the panels until they fit securely inside

the rails

FIG. 2

FIG. 5

FIG. 6

FIG. 7

FIG. 3

FIG. 4A

FIG. 3A

FIG. 4

FIG. 8

4/5" screws

ASSEMBLY & INSTALLATION (CONT.)

4. To secure the lower sash into place, use the sash lock

and a 4/5 ” screw as shown below (See FIG. 9)

5. For added insulation, cut the supplied insulation foam

to the width of the window. Insert the foam between the

window sashes to prevent air and objects from getting

into the room. (See FIG. 10)

IF AC is Blocked by a Storm Window

A storm window frame will not allow the air conditioner to

tilt properly which in turn will keep it from draining properly.

To adjust for this, attach a board or piece of wood to the

sill. The board or wood piece should have a depth of at

least 1 1/2”. Make sure the board or piece of wood is ap-

proximately 1/2” higher than the storm window frame. This

will allow the air conditioner to tilt enough for proper drain-

age. (See FIG. 12).

Removing the Air Conditioner from the

Window

1. Turn the air conditioner off, and disconnect the power

cord.

2. Remove the sash seal from between windows, and

unscrew sash lock.

3. Remove the screws installed through the frame and

frame lock.

4. Close (slide) the side panels into frame.

5. Keeping a firm grip on air conditioner, raise the sash

and carefully “rock” air conditioner backward to drain

any condensate water in base of unit. Be careful not to

spill any remaining water while lifting unit from window.

6. Store parts with the air conditioner in the box

FIG. 9

FIG. 10

SASH

1 1/2” MIN

(38 mm)

STORM

WINDOW

FRAME

Board or wood

piece must be

approximately

1/2” higher

than the storm

window frame

for proper

drainage

FIG. 12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PSR-06-01 Bedienungsanleitung

Soleus Air

Soleus Air PE2-09R-32 Bedienungsanleitung

Soleus Air

Soleus Air PE4-11R-03 Bedienungsanleitung

Soleus Air

Soleus Air KY-28U Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-10ESE Bedienungsanleitung

Soleus Air

Soleus Air 000/12 - BTU Multi-Room Heat/Cool Room Air... Bedienungsanleitung

Soleus Air

Soleus Air KFH-12/KFH-12-1 Bedienungsanleitung

Soleus Air

Soleus Air KC-45H Technisches Datenblatt

Soleus Air

Soleus Air SG-WAC-10ESE-C Bedienungsanleitung

Soleus Air

Soleus Air 000 BTU Evaporative Portable Air Conditioner and... Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-09ESE-26 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air PE1-09R-30 Bedienungsanleitung

Soleus Air

Soleus Air PE6-10R-03 Bedienungsanleitung

Soleus Air

Soleus Air PSX-08-01B Bedienungsanleitung

Soleus Air

Soleus Air WS3-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air KFH-18 Bedienungsanleitung

Soleus Air

Soleus Air PH1-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PH5 Series Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M2-01 Bedienungsanleitung

Soleus Air

Soleus Air PH5-13R-32D Bedienungsanleitung

Soleus Air

Soleus Air PS08-01 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-09-OD Technisches Datenblatt

Soleus Air

Soleus Air PSH-09-01 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung