Soleus Air PH5 Series Bedienungsanleitung

PH5 Series

Portable Air Conditioner with Heat Pump

Operating Instructions

PH5(S) SERIES

3092402

Thank you for choosing a Soleus Air PH5 Series Portable Air Conditioner with Heat Pump. This

owner’s manual will provide you with valuable information necessary for the proper care and mainte-

nance of your new product. Please take a few moments to thoroughly read the instructions and famil-

iarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• The operational ambient temperature is between 23°F ~ 109°F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the ambient temperature is higher than the max operating temperature or lower than the minimum operating tem-

perature, the air conditioner may not work properly.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hose (1)

Hose Adapter (1)

Window Kit Adapter (1)

Remote Control

AAA Batteries (2)

Window Kit - 3 Sliding Panels

Air Outlet Covers (1)

Owner’s Manual

MODEL PH5-12R-32S PH5-13R-35S

COOLING CAPACITY 12,000 BTU/H 13,000 BTU/H

HEATING CAPACITY 12,000 BTU/H 12,500 BTU/H

DEHUMIDIFIER CAPACITY 60 pts/Day 60 pts/Day

POWER INPUT

COOLING 1320W 1350W

HEATING 1200W 1180W

AIR FLOW VOLUME 225 CFM 225 CFM

POWER SOURCE

115V 60Hz

11.8A (COOLING)

11A (HEATING)

115V 60Hz

12A (COOLING)

11A (HEATING)

SOUND PRESSURE LEVEL 46 dB (A) 46 dB (A)

NET WEIGHT 88 Lbs 88 Lbs

OPERATING

TEMP

COOLING 60.8℉-109℉ 60.8℉-109℉

HEATING 23℉-89.6℉ 23℉-89.6℉

DIMENSIONS UNIT 18.875” W ×32” H ×17.125” D 18.875” W ×32” H ×17.125” D

REFRIGERANT R-410A R-410A

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. The

cord will remain de-energized until the device has been manually reset. This is intended to reduce the risk of a

fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must be

considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

PRODUCT DIAGRAM

Casters

Louvers Control Panel and

LED display

Air Filter Compartment

and Air Intake

Exhaust

Outlet

Power

Cord Wrap

Remote Control and

Holder

Air Intake

Drain

Plug

PARTS & ASSEMBLY

PARTS

EXHAUST HOSE

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts

hot air (or cold air in heat mode) out of the room to complete the air exchange. When the unit is operating in fan mode,

no outdoor air exchange takes place. The window kit and exhaust hose do not need to be installed when the unit is used

as a fan.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSE

• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

• Extend both ends of the exhaust hose approximately 6 inches.

• Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise.

• Remove the outlet cover from the back of the unit by screwing them counter-clockwise, then lifting up.

• Mount the exhaust hose onto the back of the unit by locking the hose adapter into place.

HOSE ADAPTERHOSE ADAPTERHOSE ADAPTER EXHAUST HOSE

WINDOW KIT

ADAPTER

NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and images

show general directions for Soleus Air hose portable air conditioners.

VENTING KIT INSTALLATION

NOTE: FOR THE PH5 THERE IS ONLY ONE EXHAUST HOSE TO INSTALL

WINDOW KIT ASSEMBLY

1.Parts:

A) 2 Track Screws

B) 2 Wing Nuts

C1 & C2) 2 Hose Panels, one Exhaust Hose Openings

D) 1 Sliding Track Panel

2. Assembly:

First, take the Track Screws (A) and screw one

3. Next, take the Wing Nuts (B) and tighten them

around each of the Track Screws (A). Do not tighten

the Wing Nuts (B) all the way; make sure they are

somewhat loose.

4. Now, place the Sliding Track Panel (D)

over the Track Screw (A) on Hose Panel (C1).

5. Next, take the other Hose Panel (C2) and connect

it to Hose Panel (C1) by placing the Sliding Track

Panel (D) over the Track Screw (A) on Hose Panel

(C2).

6. The Hose Panels (C1 &C2) should now be

connected using the Sliding Track Panel (D).

7. To complete the assembly, tighten the wing Nuts

(B) installed earlier. The finished Window Kit

should resemble the image seen below.

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & LED CONTROL DISPLAY

CONTROL PANEL

LED CONTROL DISPLAY

AUTO A/C DEHUM. FAN HEAT

TIMER ON

TIMER OFF

TEMPERATURE

AND TIMER

INDICATOR

COMPRESSOR ON/OFF SLEEP MODE ON/OFFBUCKET FULL

REMOTE RECEIVER

FAN SPEED

TIMER

MODE

TIME/TEMP DECREASE POWER

TIME/TEMP INCREASE

FAN SPEED

OSCILLATION ON/OFF

LED CONTROL DISPLAY

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 9)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, Fan only, and Heater mode.

3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the led control display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-

ing the speed control button. The speeds will cycle through in this order: High, Medium, Low, Auto. Each

change in speed will be associated with a “beep” sound from the unit.

4) Temperature - Select the desired temperature by pressing either ▼or ▲ key when using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit will display this temperature setting until it is changed by the user. The led

control display shows temperature in Celsius or Fahrenheit. Press the ▼and ▲simultaneously to change

from C° to F°.

5) TIMER*- To program the Auto-on timer, first press the TIMER button when the unit is off. Once the

TIMER button is pressed the hours will blink on the display. Press the ▼or ▲ buttons to change the

number to the desired hours for the unit to automatically turn on. To program the unit to turn off automati-

cally press the TIMER button when the unit is on to set the off timer. The display will flash the hours to

turn off the unit. Press the ▼or ▲ buttons to change the hours to the desired time for the unit to automati-

cally turn off. The timer is set when the auto-off time stops flashing.

*NOTE: For a more sophisticated clock timer, use the included LCD remote control.

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the Mode button until the “ ” icon appears on the led control display

5) Press the ▲or ▼buttons until the desired room temperature appears on the control panel

display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest

setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and

window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air SG-TTW-12HC Bedienungsanleitung

Soleus Air

Soleus Air KFCHP5-09-ID Bedienungsanleitung

Soleus Air

Soleus Air PSH-08-01 Bedienungsanleitung

Soleus Air

Soleus Air PE4-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air WS2-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air MAC-12K/10K Bedienungsanleitung

Soleus Air

Soleus Air FEA-12HP Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-10ESE Bedienungsanleitung

Soleus Air

Soleus Air PE6-10R-03 Bedienungsanleitung

Soleus Air

Soleus Air KFH-12/KFH-12-1 Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air PE3-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PAC12 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 NT Bedienungsanleitung

Soleus Air

Soleus Air GH-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-12HCE Bedienungsanleitung

Soleus Air

Soleus Air WS1-06E-02 Bedienungsanleitung

Soleus Air

Soleus Air PH1-14R-03 Bedienungsanleitung

Soleus Air

Soleus Air KY-34 Bedienungsanleitung

Soleus Air

Soleus Air KC-30H Technisches Datenblatt

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air Soleus LX-100 LX-100 Bedienungsanleitung

Soleus Air

Soleus Air KY-32E Bedienungsanleitung

Soleus Air

Soleus Air TTW-SLG Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung