Soleus Air 000/12 - BTU Multi-Room Heat/Cool Room Air... Bedienungsanleitung

10,000 /12,000 BTU Portable Air Conditioner

LX-100/LX- 100BL/LX- 120/LX- 120BL

Operating Instructions

I ,,

Ih,:

i,i,

li'

il'

iiiill.................................

,,,,111111111111111111111111

_,_1_ "'-; ......

.;_,_._;. _,rF",< ro, Model No. LX- 100/120

,(:,2006 Soleus Air International

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner's manual will provide you

with valuable information necessary for the proper care and maintenance of your new product. Please

take a few moments to thoroughly read the instructions and familiarize yourself with all the opera-

tional aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name:

Location:

Date Purchased:

Serial Number (located on back of unit):

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner's manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage be%re use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hoses (2)

Hose Adapters (2)

Window Kit Adapter (2)

Remote Control

AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels)

Air Intake and Outlet Covers (2)

Owner's Manual

SPECIFICATIONS

•The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating

temperature, the air conditioner may not work properly.

MODEL

COOLING CAPACITY

HEATING CAPACITY

DEHUMIDIFYING CAPACITY

POWER COOLING

HEATING

AIR FLOW VOLUME

POWER SOURCE

SOUND PRESSURE LEVEL

NET WEtGHT

OPERATING

TEMPERATURE

COOLING

HEATING

DIMENSIONS ASSEMBLED

PACKAGE 22.4" W × 34.44" H × 19.88" D

LX-100 & LX-100BL/LX-120 & LX-120BL

10,000 BTU/H /12,000 BTU/H

1350 Watts /1350 watts

50 pts/Day /60 pts/Day

1020 W /1350 W

1350W /1350W

225 CFM

115 V~60 HZ

9/12 AMP /12/12 AMP

COOLI NG/H EATI NG

46 dB(A)

76 Lbs /82 Lbs

60.8°_:'-107.6°_:'

23_t-'_89.6_t-'

17.5"W x32.75" H x19" D

REFRIGERANT R22

PRODUCT DIAGRAM

Control Panet

Signal Rece

Filter Compartment

Air Outlet Ho_

Drain Po_

Evaporator Air Inta_e

Air Intake He_

Air intake CovedFilter

PARTS & ASSEMBLY

PARTS

EXHAUST HOSES

Hose Adapter

Exhaust Hose

- Window Kit

Adaptor

Wl NDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit draws in flesh outdoor air and exhausts hot air

out of the room to complete the air exchange. When the unit is operating in tan or heater modes, no outdoor air exchange

takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan or heater.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSES

*Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

. Extend both ends of the exhaust hoses approximately 6 inches.

. Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise. Repeat on the other exhaust hose.

. Remove outlet covers flom the back of the unit by screwing them counter-cloclcwise, then lifting up.

. Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.

DUAL HOSE WINDOW KIT INSTALLATION

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

CONTROL PANEL TEMP & TIMER SELECTION

j POWER BUTTON

TIMER BUTTONS SWING (LOUVER

OSCILLATION)

i=.

FAN SPEED BUTTON

_MODE BUTTON

MUL TI-COLOR DISPLA Y

FAN SPEED

AUTO NC DEHUM.

FI Ni EAT

./TIMER ON

iTIMER OFF

TEMPERATURE

AND TIMER

INDICATOR

OSCILLATION ON/OFF COMPRESSOR ON/OFF EMERGENCY SLEEP MODE ON/OFF

CONDENSATE-

BUCKET FULL

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 7)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection -Press the MODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, Fan only, and Heater.

3) Fan Speed Control -Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-

ing the speed control button. The speeds will cycle through in this order: Low, Medium, High, Auto. Each

change in speed will be associated with a "beep" sound from the unit.

4) Temperature - Select the desired temperature by pressing either • or • key when using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit will display this temperature setting until it is changed by the user. The

Multi-color display shows temperature in Celsius or Fahrenheit. Press the • or • simultaneously to

change from C° to F°.

5) SWING -To turn on the exclusive WAVEFLO(R) oscillation, press the SWING button on the control

panel. Once you press SWING, the louvers on the unit will oscillate up and down and back and forth.

6_ Timer - To program the timer, press the TIMER ON button until the display shows a flashing" G_ "

Press the • or • buttons to change the clock to the desired time for the unit to automatically turn on.

Press the TIMER OFF button and the display on the unit will flash" Q_o ". Press the • or •

buttons to change the clock to the desired time for the unit to automatically turn off. The TIMER OFF

indicator will flash for 3 seconds to activate the times you programmed.

NOTE: The timer will also remember your settings when it is set. If you set the timer while in Air Condition-

ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-

sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-

ting. The timer works when the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan

mode, and Auto mode

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the Mode button until the" _ "icon appears on the Multi-color display

5) Press the • or • buttons until the desired roolnc!elnperature appears on the control panel

display. The temperature ranges from 61 F - 88 F (16 C - 31 C).

6) SelectthedesiredtanspeedbypressingtheFAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest

setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and

window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

Dehumidifier Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button on the control panel.

4) Press the MODE button until the" (') " appears on the control panel display.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during

the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the

moisture from the room.

NOTE: The unit will not perform in dehumidifier mode when the room temperature is lower than 61 F.

Fan Mode

l) Plug the Power Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the" _!_ "icon appears on the control panel display.

4) Select the fan speed by pressing the FAN button.

5) To circulate more air, press the SWING button on the remote control. The louvers will oscillate in our

exclusive WAVEFLO(R) pattern; back and forth and up and down, spreading more air throughout the

room.

NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.

Heatinq Mode

1) Plug the Power Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the" _':2_ "icon appears on the control panel display.

4) Press the Tor • buttons until the desiredoroOm temperature appears on the control panel display. The

temperature ranges from 61°F - 88 F (16 C - 31 C).

5) Select the fan speed by pressing the FAN button. It is recommended to set the fan speed to low.

NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in heating

mode.

Auto Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the MODE button until the" _/* "icon appears on the control panel display. Select the fan speed

bypressingtheFAN button.

NOTE: During AUTO mode, the unit operates in Heating mode when the room temperature is below 68 F,

o o

Dehumidifier mode when the room temperature is between 68 F to 80 F. And Air Conditioner mode when

the room temperature is above 80 F.

Sleep Mode (This mode can only be selected when using the Remote control )

1) To set Sleep mode, snake sure the unit is in Air Conditioner mode.

2) Press the SLEEP Button on the remote control. The .... icon appears on the control panel display.

3) When in SLEEP mode, the fan will run on low to keep fan noise at a lninimum.

4) When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above the original set

temperature for 6 hours. After 6 hours the temperature setting will return to the set telnperature.

5) When in Heating mode, the temperature setting will gradually decrease to 2°F below the original set tem-

perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.

6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.

Compressor Indicator

The .... icon will light up on the control panel display when the compressor turns on. The .... icon will

turn off when the compressor shuts off.

Emergency Condensate Holding Tank

When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to

evaporate some of the moisture fast enough. When this happens, the water will accumulate in an emergency

condensate tank inside the unit. Once the emergency condensate tank is full, the unit will automatically shut

off and the" _:'_' "will appear on the control panel display. To empty the condensate tank, pull the drain plug

at the bottom back of the unit. You will need a small pan, approximately 1" high to catch the water coining out

of the condensate tank. Once the condensate tank is drained, the unit will begin working within a few minutes.

The emergency condensate tank is approximately 1.5 Liters of water. Another option is to purchase a small

hose from a hardware store that can fit around the 5/8" drain plug on the back of the unit and drain the unit into

a gravity drain or larger pan for continuous drainage. It is not advised to use continuous drainage when the

room temperature is higher than 90°F.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PH1-14R-03 Bedienungsanleitung

Soleus Air

Soleus Air PSJ-05-01A Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air GL-PAC-08E4 Bedienungsanleitung

Soleus Air

Soleus Air HCC-C09HP-A Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air GM-CAC-08ESE Bedienungsanleitung

Soleus Air

Soleus Air iCongo PSQ-08-01 Bedienungsanleitung

Soleus Air

Soleus Air KFTHP-9-ID Bedienungsanleitung

Soleus Air

Soleus Air PE3-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air MAC-10K Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-09-OD Technisches Datenblatt

Soleus Air

Soleus Air SPTAC-09H Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-12E1HP Bedienungsanleitung

Soleus Air

Soleus Air PS08-01 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-25ESE-C Bedienungsanleitung

Soleus Air

Soleus Air HCB-P11-A Bedienungsanleitung

Soleus Air

Soleus Air KY-120HP Bedienungsanleitung

Soleus Air

Soleus Air KFMHP-18-ID Bedienungsanleitung

Soleus Air

Soleus Air GH-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air Soleus LX-100 LX-100 Bedienungsanleitung

Soleus Air

Soleus Air PE8-11R-32 Bedienungsanleitung

Soleus Air

Soleus Air PE3-09R-03 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung