Soleus Air LX-140 Bedienungsanleitung

14,000 BTU Portable Air Conditioner

12,000 BTU Heat Pump

Operating Instructions

Model No. LX-140

Thank you for choosing a Soleus Air LX-140 ortable Air Conditioner & Heat ump. This owner’s

manual will provide you with valuable information necessary for the proper care and maintenance of

your new product. lease take a few moments to thoroughly read the instructions and familiarize

yourself with all the operational aspects of your new Soleus Air ortable Air Conditioner with Heat

ump technology.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date urchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

WARNIN : This unit has a voltage rating of 115

volts. The cord has a plug as shown in A. An adapter as

shown in C is available for connecting three-blade

grounding-type plugs to two-slot receptacles. The

grounding lug extending from the adapter must be con-

nected to a permanent ground such as a properly

grounded outlet box. The adapter should not be used if

a three-slot grounded receptacle is available.

DO NOT DEFEAT THE SAFETY UR OSE OF

THE GROUNDED LUG.

SPECIFICATIONS

• The cooling capacity is meas-

ured at an ambient temperature

of DB 86 °F, WB 78 °F.

• Noise level is measured at a

distance of 3.28 ft away from

the front of the unit, when the

unit is in cooling mode.

• ower consumption is meas-

ured when the fan runs at the

highest speed setting.

• These specifications are for

reference only. For actual data,

please refer to the rating label

on the back of the unit.

• If the environment temperature

is higher than the max operat-

ing temperature or lower than

the minimum operating tem-

perature, the air conditioner

may not work properly.

PACKAGE CONTENTS

MODEL L -140

COOLING CAPACITY 14,000 BTU/H

HEATING CAPACITY 12,000 BTU/H

DEHUMIDIFYING CAPACITY 60 pts/Day

POWER

COOLING 1350W

HEATING 1350W

AIR FLOW VOLUME 225 CFM

POWER SOURCE 115 V~ 60 HZ

12/12 AMP HEATING/COOLING

SOUND PRESSURE LEVEL 46 dB(A)

NET WEIGHT 82 Lbs

OPERATING

TEMPERATURE

COOLING 60.8℉-108℉

HEATING 23℉-89.6℉

DIMENSIONS

ASSEMBLED 17.7” W ×32.9” H ×18.9” D

PACKAGE 19.9” W ×34.5” H ×22.5” D

REFRIGERANT R22

ortable Air Conditioner

Exhaust Hoses (2)

Hose Adapters (2)

Window Kit Adapter (2)

Remote Control

AAA Batteries (2)

Window Kit - 4 Sliding anels (1 dual hose panel, 1 single hose panel, 2 extension panels)

Air Intake and Outlet Covers (2)

Owner’s Manual

PRODUCT DIAGRAM

Casters

Louvers

Signa Receptor

Contro Pane

Air Intake Cover/Fi ter

Fi ter Compartment

PARTS & ASSEMBLY

PARTS

EXHAUST HOSE

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts

hot air (in AC or dehumidifier mode) or cool air (in Heat mode) out of the room to complete the air exchange. When the

unit is operating in fan mode, no outdoor air exchange takes place. The window kit and exhaust hose do not need to be

installed when the unit is used as a fan.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSES

• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

• Extend both ends of the exhaust hoses approximately 6 inches.

• Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise. Repeat on the other exhaust hose.

• Remove outlet covers from the back of the unit by screwing them counter-clockwise, then lifting up.

• Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.

DUAL HOSE WINDOW KIT INSTALLATION - To quickly and efficiently cool a large area.

SINGLE HOSE EXHAUST & WINDOW KIT INSTALLATION

When you want quick spot cooling, install the LX-140 using the single hose window kit installation.

For Sing e Hose Insta ation

Install only the left exhaust hose over the circular air outlet (this outlet will be on the left side of the unit when

you are facing the back of the unit). Cover the right circular air intake using the exhaust intake cover. After

installing the hose remove the square air intake cover on the back of the unit and install the square air intake

vent with removable/washable filter.

For Sing e Hose Window Kit Insta ation

To install the window kit, follow the same directions on page 6 for dual hose installation, but instead of using

the dual hose window kit panel, use the single hose panel pictured below.

Exhaust Hose insta ed

onto circu ar air out et

on eft side

Exhaust cover insta ed

over circu ar air intake on

right side

Air Intake Cover Air Intake Vent

Sing e Hose Window Kit Pane

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

CONTROL PANEL

MULTI-COLOR DISPLAY

POWER BUTTON

MODE BUTTON

TIMER BUTTONS

TEMP & TIMER SELECTION

FAN SPEED BUTTON TEMP SELECT

AUTO A/C DEHUM. FAN HEAT

FAN SPEED

TIMER ON

TIMER OFF

TEMPERATURE

AND TIMER

INDICATOR

OSCILLATION ON/OFF COMPRESSOR ON/OFF SLEEP MODE ON/OFF BUCKET FULL

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 8)

1) Power On and Off - ress the POWER button once to manually turn the unit on. ress the POWER

button once more to turn the unit off.

2) Mode Se ection - ress the MODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, Fan only, and Heater.

3) Fan Speed Contro - ress the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-

ing the speed control button. The speeds will cycle through in this order: Low, Medium, High, Auto. Each

change in speed will be associated with a “beep” sound from the unit.

4) Temperature - Select the desired temperature by pressing either ▼ or ▲ key when using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit will display this temperature setting until it is changed by the user. The

Multi-color display shows temperature in Celsius or Fahrenheit. ress the °F/°C button on the control

panel to select the desired temperature setting.

5) Timer - To program the timer, press the TIMER ON button until the display shows a flashing “ ”.

ress the ▲ or ▼ buttons to change the clock to the desired time for the unit to automatically turn on.

ress the TIMER OFF button and the display on the unit will flash “ ”. ress the ▲ or ▼

buttons to change the clock to the desired time for the unit to automatically turn off. The TIMER OFF

indicator will flash for 3 seconds to activate the times you programmed.

NOTE: The timer will also remember your settings when it is set. If you set the timer while in Air Condition-

ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-

sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-

ting. The timer works when the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan

mode, and Auto mode

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hoses and window kit properly (see pages 6 & 7).

2) lug the ower Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) ress the Mode button until the “ ” icon appears on the Multi-color display

5) ress the ▲ or ▼ buttons until the desired room temperature appears on the control panel

display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest

setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and

window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

NOTE: When the unit is running on cooling mode, the exhaust hoses are required and must be

vented outside using the supplied window kit.

Dehumidifier Mode

1) Install the exhaust hoses and window kit properly (see pages 6 & 7).

2) lug the ower Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button on the control panel.

4) ress the MODE button until the “ ” appears on the control panel display.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during

the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the

moisture from the room.

NOTE: When the unit is running on dehumidifier mode, the exhaust hoses are required and must

be vented outside using the supplied window kit.

NOTE: The unit will not perform in dehumidifier mode when the room temperature is lower than 61°F .

Fan Mode

1) lug the ower Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) ress the MODE button until the “ ” icon appears on the control panel display.

4) Select the fan speed by pressing the FAN button.

5) To circulate more air, press the SWIN button on the remote control. The louvers will oscillate in our

exclusive WAVEFLO® pattern; back and forth and up and down, spreading more air throughout the

room.

NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.

Heating Mode

1) Install the exhaust hoses and window kit properly (see pages 6 & 7).

2) lug the ower Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) ress the MODE button until the “ “ icon appears on the control panel display.

5) ress the ▼or ▲ buttons until the desired room temperature appears on the control panel display. The

temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the fan speed by pressing the FAN button. It is recommended to set the fan speed to low.

NOTE: When heat mode is selected, the unit will shut down for 3-5 minutes, then start in heating mode.

NOTE: When the unit is running on heating mode, the exhaust hoses are required and must be

vented outside using the supplied window kit.

Andere Handbücher für LX-140

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air WM1-12E2-01 Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air KFMHP-18-ID Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air MAC-12K/10K Bedienungsanleitung

Soleus Air

Soleus Air MA-9000AH Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Soleus Air

Soleus Air FEA-12HP Bedienungsanleitung

Soleus Air

Soleus Air PE2-08R-62 Bedienungsanleitung

Soleus Air

Soleus Air KY-320 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-18-ID Technisches Datenblatt

Soleus Air

Soleus Air PSH-09-01 Bedienungsanleitung

Soleus Air

Soleus Air iCongo PSQ-08-01 Bedienungsanleitung

Soleus Air

Soleus Air LX-135DHP Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-12HC Bedienungsanleitung

Soleus Air

Soleus Air LX-140BL Bedienungsanleitung

Soleus Air

Soleus Air KY4-100 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-15ESE-C Bedienungsanleitung

Soleus Air

Soleus Air KC-15U Bedienungsanleitung

Soleus Air

Soleus Air PSC-12HP-201 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE-F Bedienungsanleitung

Soleus Air

Soleus Air PE1-09R-30 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung