Soleus Air PE2-08R-62 Bedienungsanleitung

8000 / 10,000 BTU Portable Air Conditioner

with dehumidifier & Fan

PE2-08R-62 / PE2-10R-32

Operating Instructions

Model No. PE2-08R / PE2-10R

3046364

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you

with valuable information necessary for the proper care and maintenance of your new product. Please

take a few moments to thoroughly read the instructions and familiarize yourself with all the

operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) When the unit is not in use, always remove the venting kit from window.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature,

the air conditioner may not work properly.

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE

PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT

TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hoses (1)

Hose Adapters (1)

Window Kit Adapter (1)

Remote Control

AAA Batteries (2)

Window Kit - 2 Sliding Panels (1 single hose panel, 1 extension panels)

Owner’s Manual

MODEL PE2-10R-32 PE2-08R-62

Cooling Capacity 10,000 BTU/Hr 8,000 BTU/Hr

Dehumidifying Capacity 55 pts/day 50 pts/day

Power Consumption Cooling 1250 W 950 W

Air Flow Volume 285 CFM 285 CFM

Power Source 115 V / 60 HZ 115 V / 60 HZ

Rated Current Cooling 11.2 A

Sound Pressure Level <45db(A) <40db(A)

Weight 68lbs 68lbs

Dimensions (WxDxH) 12.98” x 22.17” x 27.78” 12.98” x 22.17” x 27.78”

Refrigerant R22 R22

8.5A

PRODUCT DIAGRAM (Actual product design may differ slightly from images below)

FRONT

A. Control panel

B. Vertical air louvers

C. Air outlet

D. Horizontal air louvers

E. Casters

F. Power Cord & Plug

BACK

A. Hot air outlet grill

B. Lower air inlet grill

ACCESSORIES

Flexible exhaust hose with 2 adapters

• 3-piece set

• stretches from 14 1/4” to 60 5/8”

(36cm to 150cm)

Adjustable window slider kit

• 2-piece set

• adjusts 28” to 55”

Drain tube

Drain pan

INSTALLATION

SELECTING THE LOCATION

Place the unit in a flat location where the air out-

lets are not obstructed. Place the unit at least

20” (50cm) away from a wall or other obstacle.

MOUNTING THE EXHAUST HOSE

Slide the square end of the exhaust duct over the

hot air outlet on the back of the unit.

The exhaust hose should be kept as short and

straight as possible. Prevent any sharp bends in

the exhaust hose, as this will trap hot exhaust air.

The hot exhaust air can be vented through the

wall or out a window. If mounting in the wall, the

height of the hole should be 16 to 50 inches

(40cm to 130cm).

Soleus Air does not provide a venting kit for

through the wall ventilation. Venting through the

wall requires a custom installation.

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk

of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must

be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

WINDOW KIT INSTALLATION

The window kit is designed to fit into most standard

vertical and horizontal windows, as well as some

sliding glass doors. However, it may be necessary to

modify some aspects of the installation process for

certain window types.

Open the window or sliding door and adjust the

length of the window kit to fit the opening. If

the window kit is not long enough, connect the

extra window kit panel to fit the opening. Mark

and cut down a single panel of the window kit

if necessary.

Place the window kit between the window and the

window frame as shown in the images to the

right. Close the window onto the window kit to

form a tight seal.

Attach the exhaust duct adapter to the window kit.

Tabs located on the adapter will lock into

place securing the adapter to the window kit.

WINDOW KIT INSTALLATION

Window Slider Kit

Minimum: 28”

Maximum: 55”

Window Slider Kit

Minimum: 28”

Maximum: 55”

WINDOW KIT INSTALLATION (cont’d)

NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and images

show general directions for all Soleus Air single hose portable air conditioners. - The heating function is not available on this unit.

When using to a sliding door, it is recommend to make

the air outlet up to air inlet.

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

MULTI-COLOR DISPLAY

MODE BUTTON

TIMER BUTTON

INCREASE TEMP & TIMER DECREASE TEMP & TIMER

POWER BUTTON

AUTO A/C DEHUM. FAN

FAN SPEED

TIMER ON TIMER OFF

TEMP AND

TIMER

INDICATOR

OSCILLATION ON/OFF COMPRESSOR ON/OFF SLEEP MODE ON/OFFBUCKET FULL

FAN SPEED

SWING BUTTON

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 9)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, and Fan.

3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the Multi-color display.

4) Temperature - Select the desired temperature by pressing either ▼or ▲ button when using the unit in

cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-

perature is set, the unit will display this temperature setting until it is changed by the user. The Multi-color

display shows temperature in Celsius or Fahrenheit. Press the ▼or ▲ buttons simultaneously on the con-

trol panel to select the desired temperature setting.

5) Timer - Turn the unit on - To program the unit to automatically turn on , press the TIMER button

when the unit is off. Once the TIMER button is pressed, the Timer On icon will flash in the multi

-color display. Choose the preferred time for the unit to turn on (between 1-24 hours) by pressing the ▼or

▲ buttons. Once you have chosen the desired time, the Timer On icon will flash for 3 seconds then remain

lit until the unit turns on.

6) Timer - Turn the unit off - To program the unit to automatically turn off, press the TIMER button when

the unit is on. Once the TIMER button is pressed the Timer Off icon on the display on the unit will flash

“ ”. Press the ▲or ▼buttons to change the clock to the desired time for the unit to

automatically turn off. The TIMER indicator will flash for 3 seconds to activate your programmed time

then remain solid until the unit automatically shuts down.

7) Swing - To start horizontal oscillation, press the Swing button once. ‘‘ “ icon will appear on the

multi-color display. To stop oscillation, press the Swing button again. Vertical air flow direction can be

adjusted manually.

NOTE: The timer will remember your settings when it is set. If you set the timer while in Air Conditioning

mode, the timer will automatically turn the unit on and off in air conditioning mode according to the desired

programmed times. The timer will also remember the temperature settings, fan speed, and oscillation setting.

The timer works when the unit is in Air Conditioner mode, Dehumidifier mode, Fan mode, and Auto mode.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PE2-09R-32 Bedienungsanleitung

Soleus Air

Soleus Air WM1-12E-01 Bedienungsanleitung

Soleus Air

Soleus Air SA-50 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-25ESE-C Bedienungsanleitung

Soleus Air

Soleus Air PE4-11R-03 Bedienungsanleitung

Soleus Air

Soleus Air WM1-15E-01 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-18 Bedienungsanleitung

Soleus Air

Soleus Air PSR-06-01 Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air PE2-10R-32 Bedienungsanleitung

Soleus Air

Soleus Air PSH-09-01 Bedienungsanleitung

Soleus Air

Soleus Air PH3-09R Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-22-ID Technisches Datenblatt

Soleus Air

Soleus Air PH-3-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PS08-01 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-22 Technisches Datenblatt

Soleus Air

Soleus Air TTWM1-14H-01 Bedienungsanleitung

Soleus Air

Soleus Air HCB-P11-A Bedienungsanleitung

Soleus Air

Soleus Air WS2-15E-201 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-12E1 Bedienungsanleitung

Soleus Air

Soleus Air WM1-06E-01 Bedienungsanleitung

Soleus Air

Soleus Air PMC-12HP-201 Bedienungsanleitung

Soleus Air

Soleus Air PH4-13R-01 Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung