Soleus Air PE3-09R-03 Bedienungsanleitung

9,000 BTU Portable Air Conditioner

PE3-09R-03

Operating Instructions

Model No. PE3-09R-03

Thank you for choosing a Soleus Air PE3-09 -03 Portable Air Conditioner. This owner’s manual will

provide you with valuable information necessary for the proper care and maintenance of your new

product. Please take a few moments to thoroughly read the instructions and familiarize yourself with

all the operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating

temperature, the air conditioner may not work properly.

PACKAGE CONTENTS

MODEL PE3-09R-03

COOLING CAPACIT 9,000 BTU/H

DEHUMIDIF ING CAPACIT 50 pts per Day

COOLING POWER

1020 W

AIR FLOW VOLUME 225 CFM

POWER SOURCE 115 V~ 60 HZ

9AMP

SOUND PRESSURE LEVEL 46 dB(A)

NET WEIGHT 76 Lbs

OPERATING

TEMPERATURE 60.8℉-107.6℉

DIMENSIONS

ASSEMBLED 17.5” W × 32.75” H ×19” D

PACKAGE 22.44” W × 34.44” H × 19.88” D

REFRIGERANT R22

Portable Air Conditioner

Exhaust Hoses (2)

Hose Adapters (2)

Window Kit Adapter (2)

emote Control

AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels)

Air Intake and Outlet Covers (2)

Owner’s Manual

PRODUCT DIAGRAM

Casters

Louvers

Signa Receptor

Contro Pane

Fi ter Compartment

Air Intake Cover/Fi ter

DUAL HOSE WINDOW KIT INSTALLATION

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

CONTROL PANEL

MULTI-COLOR DISPLAY

POWER BUTTON

MODE BUTTON

TIMER BUTTONS

TEMP & TIMER SELECTION

FAN SPEED BUTTON

AUTO A/C DEHUM. FAN

FAN SPEED

TIMER ON

TIMER OFF

TEMPERATURE

AND TIMER

INDICATOR

OSCILLATION ON/OFF SLEEP MODE ON/OFF EMERGENCY

CONDENSATE-

BUCKET FULL

SWING (LOUVER

OSCILLATION)

COMPRESSOR ON/OFF

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 7)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Se ection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, and Fan only mode.

3) Fan Speed Contro - Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-

ing the speed control button. The speeds will cycle through in this order: Low, Medium, High, Auto. Each

change in speed will be associated with a “beep” sound from the unit.

4) Temperature - Select the desired temperature by pressing either ▼ or ▲ key when using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit will display this temperature setting until it is changed by the user. The

Multi-color display shows temperature in Celsius or Fahrenheit. Press the ▼ or ▲ simultaneously to

change from C° to F°.

5) SWING - To turn on the exclusive WAVEFLO® oscillation, press the SWING button on the control

panel. Once you press SWING, the louvers on the unit will oscillate up and down and back and forth.

6) Timer - To program the timer, press the TIMER ON button until the display shows a flashing “ ”.

Press the ▲ or ▼ buttons to change the clock to the desired time for the unit to automatically turn on.

Press the TIMER OFF button and the display on the unit will flash “ ”. Press the ▲ or ▼

buttons to change the clock to the desired time for the unit to automatically turn off. The TIMER OFF

indicator will flash for 3 seconds to activate the times you programmed.

NOTE: The timer will also remember your settings when it is set. If you set the timer while in Air Condition-

ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-

sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-

ting. The timer works when the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan

mode, and Auto mode

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the Mode button until the “ ” icon appears on the Multi-color display

5) Press the ▲ or ▼ buttons until the desired room temperature appears on the control panel

display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest

setting and the fan speed on high. educing the length of the exhaust duct, insulating the exhaust hose and

window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

Dehumidifier Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button on the control panel.

4) Press the MODE button until the “ ” appears on the control panel display.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during

the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the

moisture from the room.

NOTE: The unit will not perform in dehumidifier mode when the room temperature is lower than 61°F .

Fan Mode

1) Plug the Power Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the “ ” icon appears on the control panel display.

4) Select the fan speed by pressing the FAN button.

5) To circulate more air, press the SWING button on the remote control. The louvers will oscillate in our

exclusive WAVEFLO® pattern; back and forth and up and down, spreading more air throughout the

room.

NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.

Auto Mode

1) Install the exhaust hoses and window kit properly (see pages 6).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the MODE button until the “ ” icon appears on the control panel display. Select the fan speed

by pressing the FAN button.

NOTE: During AUTO mode, the unit operates in Dehumidifier mode when the room temperature is between

68 °F to 80 °F. And Air Conditioner mode when the room temperature is above 80 °F.

S eep Mode (This mode can only be selected when using the emote control )

1) To set Sleep mode, make sure the unit is in Air Conditioner mode.

2) Press the SLEEP Button on the remote control. The “ ” icon appears on the control panel display.

3) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.

4) When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above the original set

temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.

5) When in Heating mode, the temperature setting will gradually decrease to 2°F below the original set tem-

perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.

6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.

Compressor Indicator

The “ ” icon will light up on the control panel display when the compressor turns on. The “ ” icon will

turn off when the compressor shuts off.

Emergency Condensate Ho ding Tank

When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to

evaporate some of the moisture fast enough. When this happens, the water will accumulate in an emergency

condensate tank inside the unit. Once the emergency condensate tank is full, the unit will automatically shut

off and the “ ” will appear on the control panel display. To empty the condensate tank, pull the drain plug

at the bottom back of the unit. You will need a small pan, approximately 1” high to catch the water coming out

of the condensate tank. Once the condensate tank is drained, the unit will begin working within a few minutes.

The emergency condensate tank is approximately 1.5 Liters of water. Another option is to purchase a small

hose from a hardware store that can fit around the 5/8” drain plug on the back of the unit and drain the unit into

a gravity drain or larger pan for continuous drainage. It is not advised to use continuous drainage when the

room temperature is higher than 90°F .

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air KFHIP-09-OD Technisches Datenblatt

Soleus Air

Soleus Air WM1-06E-01 Bedienungsanleitung

Soleus Air

Soleus Air PH5-13R-32D Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air PMC-12HP-201 Bedienungsanleitung

Soleus Air

Soleus Air KFIHP-09-ID Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-15ESE-C Bedienungsanleitung

Soleus Air

Soleus Air KC-45H Technisches Datenblatt

Soleus Air

Soleus Air PH4-13R-01 Bedienungsanleitung

Soleus Air

Soleus Air KY-32U Bedienungsanleitung

Soleus Air

Soleus Air Mobile Comfort KY-80G Bedienungsanleitung

Soleus Air

Soleus Air LX-120 Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M2-01 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air GL-PAC-08E4 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-18 Bedienungsanleitung

Soleus Air

Soleus Air MAC-10K Bedienungsanleitung

Soleus Air

Soleus Air KFMHP-18-ID Bedienungsanleitung

Soleus Air

Soleus Air KTW-08 Kurzanleitung

Soleus Air

Soleus Air HCC-C09HP-A Bedienungsanleitung

Soleus Air

Soleus Air PE2-09R-32 Bedienungsanleitung

Soleus Air

Soleus Air PH3-09R-03 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung