Soleus Air PH3-09R-03 Bedienungsanleitung

Portable Air Conditioner and Heater

With Heat Pump Technology

PH3-09R-03 / PH3-10R-03

Operating Instructions

Model No. PH3-09R / PH3-10R

3046364

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner s manual will provide you

with valuable information necessary for the proper care and maintenance of your new product. Please

take a few moments to thoroughly read the instructions and familiarize yourself with all the opera-

tional aspects of your new Soleus Air Portable Air Conditioner with Heat Pump technology.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature,

the air conditioner may not work properly.

PACKA E CONTENTS

Portable Air Conditioner

Exhaust Hoses (1)

Hose Adapters (1)

Window Kit Adapter (1)

Remote Control

AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Owner s Manual

MODEL PH3-09R-03 PH3-10R-03

Cooling Capacity 9 000 BTU/Hr 10 000 BTU/Hr

Heating Capacity 9 200 BTU/Hr 10 500 BTU/Hr

Dehumidifying Capacity 55 pts/day 60 pts/day

Power Consump-

tion

Cooling 1200 W 1256W

Heating 1050 W 1179W

Air Flow Volume 285CFM 285CFM

Power Source 115 V / 60 HZ 115 V / 60 HZ

Rated Current Cooling 11.0 A 11.5A

Heating 9.5 A 10.8A

Sound Pressure Level <45 db(A) <45 db(A)

Weight 68.3lbs 68.3lbs

Dimensions (WxDxH) 12.98” x 22.17”x 27.78”

12.98” x 22.17” x 27.78”

Refrigerant R22 R22

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE

PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT

TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

PRODUCT DIA RAM (Actual product design may differ slightly from images below)

FRONT

A. Control panel

B. Vertical air louvers

C. Air outlet

D. Horizontal air louvers

E. Casters

F. Power Cord & Plug

BACK

A. Hot air outlet grill

B. Lower air inlet grill

ACCESSORIES

Flexi le exhaust hose with 2 adapters

• 3-piece set

• stretches from 14 1/4” to 60 5/8”

(36cm to 150cm)

Window exhaust adapter

Adjusta le window slider kit

• 3-piece set

• adjusts 33 1/2” to 70” (85cm to 177.8cm)

Drain tu e

Drain pan

INSTALLATION

SELECTIN THE LOCATION

Place the unit in a flat location where the air out-

lets are not o structed. Place the unit at least

20” (50cm) away from a wall or other o stacle.

MOUNTIN THE EXHAUST HOSE

Slide the square end of the exhaust duct over the

hot air outlet on the ack of the unit.

The exhaust hose should e kept as short and

straight as possi le. Prevent any sharp ends in

the exhaust hose, as this will trap hot exhaust air.

The hot exhaust air can e vented through the

wall or out a window. If mounting in the wall, the

height of the hole should e 16 to 50 inches

(40cm to 130cm).

LCDI POWER CORD AND PLU

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk

of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must

be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If a test is performed and the indicator light remains ON, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

WINDOW KIT INSTALLATION

The window kit is designed to fit into most standard

vertical and horizontal windows, as well as some

sliding glass doors. However, it may e necessary to

modify some aspects of the installation process for

certain window types.

Open the window or sliding door and adjust the

length of the window kit to fit the opening. If

the window kit is not long enough, connect the

extra window kit panel to fit the opening. Mark

and cut down a single panel of the window kit

if necessary.

Place the window kit etween the window and the

window frame as shown in the images to the

right. Close the window onto the window kit to

form a tight seal.

Attach the exhaust duct adapter to the window kit.

Ta s located on the adapter will lock into

place securing the adapter to the window kit.

WINDOW KIT INSTALLATION

WINDOW KIT INSTALLATION (cont’d)

MULTI-COLOR DISPLAY

A. Auto Mode

B. Cool Mode

C. Dehumidify Mode

D. Fan Mode

E. Heat Mode

F. Fan Speed (Low High Me-

dium)

G. Temperature

H. Swing Mode

I. Sleep Mode

J. Clock and Timer

K. Timer On

L. Timer Off

M. Compressor is on

CONTROL PANEL, DISPLAY, & OPERATIN INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

OPERATIN INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 9)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the ODE Button repeatedly to cycle between the different modes: Auto mode,

Air Conditioner, Dehumidifier, and Fan.

3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,

edium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-

ing the speed control button. The speeds will cycle through in this order: Low, edium, High, Auto. Each

change in speed will be associated with a “beep” sound from the unit.

4) Temperature - Select the desired temperature by pressing either ▼ or ▲ button when using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit will display this temperature setting until it is changed by the user. The

Multi-color display shows temperature in Celsius or Fahrenheit. Press the ▼ or ▲ buttons simultaneously

on the control panel to select the desired temperature setting.

5) Timer - To program the timer, press the TI ER ON button until the display shows a flashing “ ”.

Press the ▲ or ▼ buttons to change the clock to the desired time for the unit to automatically turn on.

Press the TI E OFF button and the display on the unit will flash “ ”. Press the ▲ or ▼ but-

tons to change the clock to the desired time for the unit to automatically turn off. The TI E OFF

indicator will flash for 3 seconds to activate your programmed on and off times.

6) Time Display - In the diagram above, the letter “J” points to the adjustable time display. To adjust the

time, Press FAN SPEED and SWING together (at the same time), then press UP to adjust the hours, and

press DOWN to adjust the minutes.

7) Swing - To start horizontal oscillation, press the Swing button once. ‘‘ “ icon will appear on the

multi-color display. To stop oscillation, press the Swing button again. Vertical air flow direction can be

adjusted manually.

NOTE: The timer will remember your settings when it is set. If you set the timer while in Air Conditioning

mode, the timer will automatically turn the unit on and off in air conditioning mode according to the desired

programmed times. The timer will also remember the temperature settings, fan speed, and oscillation setting.

The timer works when the unit is in Air Conditioner mode, Dehumidifier mode, Fan mode, and Auto mode.

Dieses Handbuch passt für folgende Modelle

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air KFHHP-22 Betriebsanleitung

Soleus Air

Soleus Air LX-140 NT Bedienungsanleitung

Soleus Air

Soleus Air KY2-34 Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air KFH-12/KFH-12-1 Bedienungsanleitung

Soleus Air

Soleus Air HCB-P08-B Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-22-ID Technisches Datenblatt

Soleus Air

Soleus Air iCongo PSQ-08-01 Bedienungsanleitung

Soleus Air

Soleus Air PAC12 Bedienungsanleitung

Soleus Air

Soleus Air WS2-15E-201 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-12HC Bedienungsanleitung

Soleus Air

Soleus Air PH5 Series Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-12E1HP Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-12E1 Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air HCC-W08ES-A1 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-18-ID Technisches Datenblatt

Soleus Air

Soleus Air KFR/KFS Series Bedienungsanleitung

Soleus Air

Soleus Air PE2-09R-32 Bedienungsanleitung

Soleus Air

Soleus Air FEA-12HP Bedienungsanleitung

Soleus Air

Soleus Air 000/12 - BTU Multi-Room Heat/Cool Room Air... Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE-F Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung