Soleus Air KY-32E Bedienungsanleitung

12,000 BTU

Evaporative Portable

Air Conditioner

Owner’s Manual

Model # KY-32E

Please read owner’s manual carefully before operating the unit.

TABLE OF CONTENTS

PAGE

Table of Contents …………….………………………………………………………………………2

Introduction ……………………………………….………………………………………….............3

Important Safeguards ……………………………………………………………………………….. 4

LCDI Power Cord and Plug…………………………………………………………………………. 5

Package Contents …………………………………………………………………………………….6

Parts Diagram ………………………………………………………………………………………...6

Assembly Requirements ……………………….……………………………………………………..8

Control Panel and LCD Screen……………………………………………………………………… 9

Operation Using the Control Panel………………………………………………………………........11

Operation Using the Remote Controller………………………………………………………….…...12

Optional Water Drainage ……………………………………………………………………………..14

Proper Care and Maintenance…………………………………………………………………………15

Troubleshooting ……………………..…………………………………………………......................16

Technical Specifications ……………………..…………………………………………………... ….17

Contact Information ……………………………….………………………………………………. 17

Warranty ………………………………………………..…………………………………………….18

INTRODUCTION

Thank you for purchasing the Soleus Air KY-32E 12000 BTU Portable Evaporative Air Conditioner. This unit is

designed to improve living and working comfort by providing cooling, dehumidifying and fan functions with

minimal installation.

This multi-functional portable air conditioner operates as an air conditioner, dehumidifier, and fan. Unlike

traditional portable air conditioners, there is no bucket to empty. The condensate water is evaporated and removed

through the exhaust duct along with warm exhaust air. At 12000 BTUs the KY-32E is one of the most powerful

portable air conditioners on the market. In addition, the high speed motor allows for operation in high temperatures

Soleus Air “Smart Chip” technology and precise control of the unit

When operating as an air conditioner, this unit is designed for spot cooling or cooling a room no larger than 450

square feet with a standard eight foot ceiling height. Please read these instructions carefully before operating this

appliance. When using this air conditioner, always exercise basic safety precautions.

This easy-to-use manual will guide you in obtaining the best use of your Portable Air Conditioner.

Please complete the following information for future reference. You will need it to obtain warranty service.

Model Number: KY-32E

Serial Number *: ___________________________________________________________________

Date of Purchase: ___________________________________________________________________

Place of Purchase: ___________________________________________________________________

*The Serial number is located on the back of the unit. Retain this Owner’s Manual with your sales receipt as a

permanent record of your purchase.

Customer Service:

1-888-876-5387

9451 Telstar Avenue

El Monte, California 91731

www.soleusair.com

IMPORTANT SAFEGUARDS

Before installing and using the portable air conditioner, please read this Owner’s manual carefully.

1. Never use or store gasoline or other flammable vapor or liquid near this unit.

2. Maintain at least 20” (50cm) clearance space around all side of the unit. Do not obstruct air inlet or outlet

grilles.

3. All in-home wiring must comply with local and national codes and be installed by a qualified technician.

All wiring problems should be resolved by a qualified technician BEFORE installation and use of this air

conditioner.

4. The power supply must be properly grounded.

5. For your safety, this unit is grounded through the power cord plug when connected to a matching wall

outlet. Do not use an adapter plug or extension cord.

6. When removing the power cord from the wall outlet, always grasp the plug firmly and pull straight from

the outlet. Never unplug the air conditioner by pulling on the cord itself.

7. Always inspect the power cord and plug for signs of damage before use.

8. Repair or replace immediately, all power cords that have become frayed or otherwise damaged. Do not use

a cord that shows cracks or abrasion damage along its length, the plug or the connector end.

9. Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool. Never immerse

the unit in water or any other liquid.

10. Keep out of reach of children.

11. Use product only as directed in this manual; unintended use may void the warranty.

NOTE: If for any reason this product requires service, we strongly recommend that a certified

technician perform the service.

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as

required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no

termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal

current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will

remain de-energized until the devise has been manually reset. This is intended to reduce the risk of a fire in the

power cord or combustible materials nearby. The cord shields are not grounded and they must be considered a shock

hazards if exposed. The cord shield must not be connected to ground or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If a test is performed and the indicator light remains ON, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

PACKAGE CONTENTS

1. Portable Air Conditioner

2. Air Exhaust Duct

3. Exhaust Duct Window Kit Adapter

4. Remote Control

5. AAA Batteries (2)

6. Window Kit - 3 Sliding Panels

7. Window Kit Fastener Screws (4)

8. Continuous Drainage Tube

9. Exhaust Outlet Wall Cover

10. User’s Manual

PARTS DIAGRAM

FRONT VIEW

REAR VIEW

WINDOW KIT

EXHAUST DUCT

ASSEMBLY REQUIREMENTS

EXHAUST DUCT

When you use the unit as an air conditioner, the hot exhaust air and evaporated condensate water must be vented out

of the room. The exhaust duct and venting kit serves this purpose.

NOTE: The exhaust duct and venting kit should not be used while the unit is operated in dehumidification,

or fan mode. DO NOT INSTALL EXHAUST DUCT WHILE UNIT IS IN OPERATION.

a) Slide “Unit Terminal End” of the exhaust

connector completely over the “Hot Air

Outlet Grill” on the rear of the unit.

Plastic grooves are located on the hot air

outlet help to guide the exhaust connector

into place.

i. Window Kit Mounting: The exhaust

hose easily connects to the window kit

by snapping the hose adapter directly

onto the kit. See page 7 for

window/sliding door kit installation.

ii. Wall Mounting: Mount the external

end of the exhaust duct to a 5¼” hole

within the wall. Creating a hole into a

wall is a separate procedure that may

require professional installation.

NOTE: Correct Mounting is shown to the

right, The center height of the hole should

between 16”-50”

NOTE: In order to achieve maximum room cooling efficiency, the exhaust duct should remain as short and straight

as possible. To further shorten the exhaust hose, first unthread either exhaust duct adapter clockwise to remove it.

Then cut the hose to desired length. It is not recommended to increase the manufacturer’s length of the exhaust

hose. This may reduce the cooling efficiency or damage the unit

WINDOW KIT INSTALLATION

a) Open window or sliding door approximately 5

inches (13 cm). Adjust the length of the window

kit to the same length of the window or sliding

door. Use two or three panels if necessary and

secure panels into place by fastening the ¾”

Phillips head screws into the pre-drilled panel

holes.

b) Alternatively you may need to mark a single

panel and cut it down to properly fit the window

opening. The window kit (three panels) has a

maximum length 81 inches.

c) Place the window kit between the window and the

window frame as shown in the picture to the

right. Close the window onto the window kit to

form a tight seal.

d) Attach the exhaust duct window kit adapter to the

window kit. Tabs located on the adapter will lock

into place securing the adapter to the window kit.

NOTE: Using the window kit will cause the window not to be properly closed and locked. Consider taking

additional security measurements.

CONTROL PANEL AND LCD SCREEN

CONTROL PANEL FUNCTIONS

1. Power On/Off Control

Starts or stops the unit.

2. Temperature Setting Control

Select the desired temperature setting by pressing either the▲▼ buttons. It is recommended to set the

temperature before selecting the Mode Control.

3. Mode Control

Select the functions of the unit for:

Air Conditioning Mode

Dehumidifying Mode

Fan Mode

Auto Mode

4. Fan Speed Control

Select the fan speed for:

Low

Medium

High

5. Timer Function

Set timer to start or stop the unit.

When the unit is On, press “Timer” Button repeatedly until the desired number of hours is

displayed in the lower right corner of the display window. The unit will automatically power Off

once the selected number of hours has elapsed.

When the unit is Off, press “Timer” Button repeatedly until the desired number of hours is

displayed in the lower right corner of the display window. The unit will automatically power On

once the selected number of hours has elapsed.

NOTE: The timer function must be manually reset before each automatic start or stop.

6. Sleep Function

The sleep function is designed to automatically adjust the temperature upwards according to the amount

of time elapsed (adjustable from 0.5 to 7.0 hours). This saves power while still keeping the room

temperature at a comfortable level.

Andere Handbücher für KY-32E

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PE2-07R-62 Bedienungsanleitung

Soleus Air

Soleus Air PE7-10R-03 Bedienungsanleitung

Soleus Air

Soleus Air PE8-11R-32 Bedienungsanleitung

Soleus Air

Soleus Air PMC-12HP-201 Bedienungsanleitung

Soleus Air

Soleus Air WS1-15E-02 Bedienungsanleitung

Soleus Air

Soleus Air WS4-10EHW-301 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air KFR/KFS Series Bedienungsanleitung

Soleus Air

Soleus Air WM1-12E-01 Bedienungsanleitung

Soleus Air

Soleus Air PE6-10R-03 Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-15ESE-C Bedienungsanleitung

Soleus Air

Soleus Air KY4-100 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air HCB-P08-B Bedienungsanleitung

Soleus Air

Soleus Air Mobile Comfort KY-80G Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air MA-9000AH Bedienungsanleitung

Soleus Air

Soleus Air 000/12 - BTU Multi-Room Heat/Cool Room Air... Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-10ESE-C Bedienungsanleitung

Soleus Air

Soleus Air PH3-09R-03 Bedienungsanleitung

Soleus Air

Soleus Air WS2-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air MAC 7500 Bedienungsanleitung

Soleus Air

Soleus Air KFMHP-18-ID Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung