Soundcore Liberty 3 Pro Bedienungsanleitung

Soundcore Liberty 3 Pro

USER MANUAL

English 01

Deutsch 12

Español 23

Français 34

日本語 45

01 EN

Charging

• Fully dry off the earbuds and the USB port before charging.

• Use a certified USB-C charging cable and charger to prevent any damage.

• Fully charge both the earbuds and the charging case before the first use.

1. Place the earbuds in the charging case and close it.

2. Connect the charging case to the power supply by using a USB-C charging

cable. Alternatively, position the charging case at the center of your wireless

charger for wireless charging.

• The LED indicators on the charging case indicate the charging status.

< 30%

30% - 70%

70% - 95%

>95%

EN 02

Wearing

Wearing the Earbuds

1. Insert the earbuds into your ears.

2. Twist the earbuds until the ear wings are wedged against the ridge of your ears.

• Use a mirror to check if you are wearing your earbuds correctly.

Your earbuds properly fit.

• The ear wings are wedged against

the ridge of your ear and you can feel

support from the backside.

• The ear tips feel stable in your ear

canal so that they can isolate ambient

sounds.

• The earbuds feel comfortable without

sticking out.

Your ear wings are too big.

• The ear wings stick out so that the

earbuds feel unstable and loose. (Or

your ear wings are squished under the

ridge of your ear.)

• The ear tips may not be deep enough

so they do not provide a comfortable

seal.

Your ear wings are too small.

• The ear wings do not touch the ridge

of your ear and get no support. The

earbuds may fall out when you move

your head.

• The ear tips may be so deep in your

ear canal that they cause too much

pressure and cannot be worn for a

long time.

03 EN

Changing the Ear Tips

1. Select the size of ear tips that fit your ears best.

2. Attach the ear tips to the earbuds. Ensure the ear tips are firmly attached.

XS 0 0

1 1

2 2

3 3

Changing the Ear Wings

1. Remove the current ear wings. Note that L2 and R2 ear wings are pre-installed.

2. Choose the best ear wing size for your ears.

3. Align the oval hole on the ear wings with the wearing detection sensor on the

earbuds.

Wearing detection sensor

EN 04

4. Insert the earbuds into the ear wings through the narrow side.

5. Stretch the ear wings into position by holding the narrow side. Ensure the ear

wings are not folded.

Powering On/Off

Open the charging case, the earbuds will automatically power on.

To power off, place the earbuds in the charging case and close it.

OFF

• To manually power on, wear both earbuds, then press and hold the touchpad on

both earbuds for 3 seconds.

• The earbuds will automatically power off after 30 minutes if they are not being

worn and are not connected.

05 EN

Bluetooth Pairing

Automatic Pairing*

1. Open the charging case, and the earbuds will automatically enter Bluetooth

pairing mode.

• The 2 LED indicators inside the charging case will flash white.

2. Select "Soundcore Liberty 3 Pro" on your device's Bluetooth list to connect.

• When successfully connected, the 2 LED indicators will pulse white.

PAIRING

Soundcore

Liberty 3 Pro

Soundcore

Liberty 3 Pro

CONNECTED

*Automatic pairing is available only for earbuds in factory mode.

Manual Pairing

1. Place the earbuds in the charging case and leave the case open.

2. Press and hold the button on the charging case for 3 seconds until the 2 LED

indicators inside the charging case flash white.

PAIRING

Multipoint

The earbuds can connect with two Bluetooth devices at the same time. There are

two ways to pair with another device.

EN 06

Option 1: Enable "Dual device connection" and connect to the second device in

the Soundcore app.

Option 2: Wear the earbuds, then press and hold the touchpad on both earbuds

for 5 seconds simultaneously. Select "Soundcore Liberty 3 Pro" on the second

device's Bluetooth list to connect.

L R

5s 5s

Soundcore

Liberty 3 Pro

Soundcore

Liberty 3 Pro

• Each time you power on your Soundcore earbuds, they will automatically

connect to your last successfully connected device if available within the

Bluetooth range.

• Mono mode: When Bluetooth is connected, you can use either one of the

earbuds on its own by placing the other one into the charging case and closing it.

• When powered on and connected, if either one of the earbuds is out of battery

and powered off, you can keep using the other one.

• When you are on a call, place either one of the earbuds into the charging case,

and the microphone in the other earbud will be activated.

07 EN

Controls

Stereo Mode

×2 1s

L / R L / R

×2 ×2

HearID ANC

Transparency

L / R

Play/Pause Tap twice (R)

Next track Tap twice (L)

Switch ambient sound modes

(HearID ANC / Transparency / Normal*) Press and hold for 2 seconds (L/R)

*You can add "Normal" in the Soundcore app.

Answer/End a call Tap twice (L/R)

Reject a call Press and hold for 1 second (L/R)

Mono Mode

×2 ×2 1s

Siri

Play/Pause Tap twice

Activate Siri or other voice assistant software* Press and hold for 1 second

Answer/End a call Tap twice

Reject a call Press and hold for 1 second

*You can enable this function in the Soundcore app.

• All of the controls in stereo mode can be customized in the Soundcore app. In

mono mode, controls cannot be customized in the app.

EN 08

• Adjust the volume level via the connected device or in the Soundcore app.

• In stereo mode, noise cancellation mode is set by default. Each time you power

on and connect, or switch to the stereo mode from mono mode, your earbuds

will restore the last setting.

• Noise cancellation or transparency mode is unavailable in mono mode.

Soundcore App

Download the Soundcore app to enhance your experience.

User interface customization: In stereo mode, all of the controls (e.g. adjust

volume, control playback, activate Siri) can be customized in the app.

EQ settings: There are more than 20 EQ settings you can choose from in the app

to optimize your experience while enjoying different music genres.

HearID Sound: HearID maps your personal hearing sensitivity at multiple

frequencies and analyzes the results. It traces the EQ settings and creates a

personalized sound profile for you.

HearID ANC: Take the ear canal test and tailor your noise cancellation experience.

• Adaptive mode: Adjust the level of noise cancelling automatically depending on

the noise levels in your surroundings to reduce pressure for a more comfortable

noise cancelling experience.

Transparency mode: Stay aware of your surroundings by allowing ambient

sounds in.

• Fully transparent: Hear all ambient sounds.

• Vocal mode: Voices stand out more clearly from other ambient sounds.

Earbuds firmware upgrade: You will be informed once the new version of

firmware is detected when you connect the earbuds with the app. Ensure the

earbuds are placed in the charging case and the case remains open until the

firmware upgrade is completed. During the upgrade, ensure the earbuds are

being charged and avoid any operation.

Andere Handbücher für Liberty 3 Pro

Inhaltsverzeichnis

Sprachen:

Andere Soundcore Kopfhörer Handbücher

Soundcore

Soundcore Life Q10 Bedienungsanleitung

Soundcore

Soundcore Spirit Dot 2 Bedienungsanleitung

Soundcore

Soundcore Life U2 Bedienungsanleitung

Soundcore

Soundcore Life Q20+ Bedienungsanleitung

Soundcore

Soundcore Life P3 Bedienungsanleitung

Soundcore

Soundcore Soundcore Life P2 Bedienungsanleitung

Soundcore

Soundcore Soundcore Life P2 Bedienungsanleitung

Soundcore

Soundcore VR P10 Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Liberty 4 Bedienungsanleitung

Soundcore

Soundcore Sleep A10 Bedienungsanleitung

Soundcore

Soundcore Soundcore Life P2 Bedienungsanleitung

Soundcore

Soundcore A3951 Bedienungsanleitung

Soundcore

Soundcore Strike 3 Bedienungsanleitung

Soundcore

Soundcore Liberty Air Bedienungsanleitung

Soundcore

Soundcore Life P2 Mini Bedienungsanleitung

Soundcore

Soundcore Life Note Bedienungsanleitung

Soundcore

Soundcore Liberty 3 Pro Bedienungsanleitung

Soundcore

Soundcore Liberty Neo Bedienungsanleitung

Soundcore

Soundcore Spirit Dot 2 Bedienungsanleitung

Soundcore

Soundcore Life P3i Bedienungsanleitung

Soundcore

Soundcore P25i Bedienungsanleitung

Soundcore

Soundcore Liberty Neo Bedienungsanleitung

Soundcore

Soundcore Liberty Neo Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung