Soundcore VR P10 Bedienungsanleitung

soundcore VR P10

USER MANUAL

EN 01

Download the soundcore app to enhance your experience (firmware

update, dongle switching, EQ tuning, gaming mode, and more).

Open the charging case, the earbuds will automatically power on.

Place the earbuds in the charging case and close the case, the

earbuds will power off.

• To manually power on, place both earbuds in the charging case

and leave the case open, press the button on the charging case.

• The earbuds will power off after 30 minutes if they are not

connected with Bluetooth devices or with the dongle.

1. Choose the Ear Tips that fit your ears best.

2. Insert the earbuds into the inner canal of your ears and turn gently

until you find the most comfortable and secure position.

• Fully dry off the earbuds and the USB-C charging port before

charging.

• Fully charge both the earbuds and the charging case before the

first use.

1. Place the earbuds in the charging case and close the case.

2. Connect the charging case to the power supply by using a

certified USB-C charging cable.

Open the charging case, then press and hold the button on the charging

case for 3 seconds to enter Bluetooth pairing mode. Select “soundcore VR

P10” from your device's Bluetooth menu to connect.

*During Bluetooth pairing, the connection between the earbuds and the

dongle might break temporarily.The connection of dongle will resume

when the Bluetooth pairing succeeds or when you return the earbuds in the

charging case, then close and open the case.

When the dongle is plugged into the USB-C port of your VR headset

or gaming console, the earbuds will automatically connect with it

and be ready to use.

POWERING ON/OFF

PAIRING VIA DONGLE BLUETOOTH PAIRING

APP

WEARING CHARGING

On Off

S M

1 2

10mins = 1.5hrs

8m/26ft

CONNECTED CONNECTED

CONNECTING

soundcore

VR P10

soundcore

VR P10

PAIRING

CONNECTED

10m/33ft

CONNECTED

EN 02

• In the soundcore app, you can customize the controls, e.g. enable a

single tap to adjust volume.

• Controls may vary when connected via the dongle if the console's

system is incompatible.

• Adjust the volume level via the connected device or in the

soundcore app.

You need a charger that supports USB PD (Power Delivery) and has

a minimum output of 9V/2A, otherwise this function might not work

properly.

*No data transmission is supported. Don't try to link a PC to a VR

headset using a USB-C cable.

1. Connect the link cable from a USB-C port on your PC to your VR

headset.

2. Plug the dongle into another USB-C port on your PC to use your

soundcore earbuds.

Mono mode: You can use either one of the earbuds only by putting

the other one back into the charging case.

Stereo Mode: When in mono mode, take out the other earbud from

the charging case, the two earbuds will automatically switch to stereo

mode.

CONTROLS

PLAYING WHILE CHARGING

VR LINKING TO PC

The earbuds can connect with two devices (via dongle or Bluetooth) at the

same time.

You can only play music from one device at a time.

If you have an incoming call on the Bluetooth device, you can hear from

both connected devices at the same, but the volume on the dongle-

connected device will be lower than that on the Bluetooth device.

DUAL CONNECTION

Play / Pause Tap twice (R)

Next track Tap twice (L)

Volume up Tap once (R)

Volume down Tap once (L)

CONTROLS

Dongle

1 2

soundcore

VR P10

soundcore

VR P10

Bluetooth

×2

Voice

Assistant

L/R

2s2s

×2

L/R

2s2s

L/R

Dongle

2s2s

L/R

Answer a call Tap twice (L/R)

Reject / End a call Tap and hold for 2

seconds (L/R)

End a call Tap and hold for 2

seconds (L/R)

Activate Siri or other

voice assistant software

Tap and hold for 2

seconds (L/R)

(via Bluetooth)

(via Dongle)

EN 03

The dongle can be magnetically adhered to the inside of the lid of

the charging case.

You need to take out both earbuds first, then take out or store the

dongle.

DONGLE STORAGE

Reset if the earbuds have issues pairing with each other or with

other devices.

Return the earbuds in the charging case and leave the case open.

Press and hold the button on the back for 10 seconds until the

charging case LED indicator flashes red three times.

Reset if the dongle has issues pairing with the earbuds.

Plug the dongle into the USB-C port of your VR headset or gaming

console, then insert an object with a sharp tip for three seconds to

reset the dongle. Open the charging case, then press and hold the

button on the charging case for 3 seconds to pair with the dongle.

DONGLE RESET

LED LIGHT GUIDE EARBUDS RESET

<10%

>10%

PAIRING

CONNECTED CONNECTED

>10%

×3

CONNECTED

CONNECTING

×3

10s

CONNECTED

CONNECTING

CONNECTED

PAIRING

CONNECTED

SPECS

Specifications are subject to change without notice.

Input 5 V 0.5 A

Rated output power 5 V 0.4 A(0.2A per port)

Battery capacity 63mAh x 2 (earbuds);

550mAh (charging case)

Charging time 2 hours

Playtime (connected via Bluetooth) Up to 5.5 hours (Total 22 hours

with the charging case)

Playtime (connected via Dongle) Up to 6 hours (Total 24 hours

with the charging case)

Driver unit 11mm dynamic driver

Frequency response 20Hz - 20kHz

Impedance 16 Ω

Waterproof level (Earbuds) IPX4

Bluetooth version 5.2

Bluetooth range 15m / 49ft

Dongle transmitter range 6m / 19.7ft

Flashing red

Steady red

Breathing purple

Steady purple

Breathing blue

Andere Handbücher für VR P10

Andere Soundcore Kopfhörer Handbücher

Soundcore

Soundcore Life Note Bedienungsanleitung

Soundcore

Soundcore Life P3 Bedienungsanleitung

Soundcore

Soundcore Life P2 Mini Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Soundcore Life P2 Bedienungsanleitung

Soundcore

Soundcore Liberty 4 NC Bedienungsanleitung

Soundcore

Soundcore R50i Bedienungsanleitung

Soundcore

Soundcore Liberty Air Bedienungsanleitung

Soundcore

Soundcore A20i Bedienungsanleitung

Soundcore

Soundcore Life Q35 Bedienungsanleitung

Soundcore

Soundcore Space Q45 Bedienungsanleitung

Soundcore

Soundcore Life Note Bedienungsanleitung

Soundcore

Soundcore Spirit 2 Bedienungsanleitung

Soundcore

Soundcore A3850 Bedienungsanleitung

Soundcore

Soundcore Soundcore Life P2 Bedienungsanleitung

Soundcore

Soundcore Liberty Air 2 Pro Bedienungsanleitung

Soundcore

Soundcore Space Q45 Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Sport X10 Installationsanleitung

Soundcore

Soundcore Spirit Dot 2 Bedienungsanleitung

Soundcore

Soundcore Space Q45 Bedienungsanleitung

Soundcore

Soundcore Liberty Air 2 Bedienungsanleitung

Soundcore

Soundcore Life U2 Bedienungsanleitung

Soundcore

Soundcore Life Q35 Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung