Soundcore Life Note Bedienungsanleitung
USER MANUAL
Soundcore Life Note
English 01 Português 66
Čeština 06 Pусский 71
Dansk 11 Slovenský Jazyk 76
Deutsch 17 Slovenski Jezik 81
ελληνικά 21 Svenska 86
Español 26 Türkçe 91
Suomi 31 日本語 96
Français 36 한국어 101
Magyar 41 简体中文 106
Italiano 10 繁體中文 111
Nederlands 51 Portugues do Brasil 116
Norsk 56 ةيِبَرَعلا 121
Język polski 61 ברִית 126
01 EN EN 02
Charging
• Remove the protective lm from the earbuds when using for the rst time.
• Fully charge both the earbuds and the charging case before the rst-time using.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.
1
RR
2
LED behavior (Earbuds & Charging case)
Steady white Being Charging
Light off • Fully charged
• Remaining battery >10% (when in use)
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON OFF
LED behavior (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press the multi-function button on either one of the earbuds.
• To manually power off, press and hold the multi-function button on either one of the
earbuds for 3 seconds.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behavior (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case,
you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, 3 to 5
seconds later, the microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
03 EN EN 04
2
Soundcore
Life Note
Bluetooth Pairing Request
“Headset” would like
to pair with your iPhone
Cancel Pair
Pair
1
LED behavior (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-
Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair”
or even no screen popped up. Don’t worry and it will not inuence the using.
Once successfully paired, the primary earbud connects with your device and transfers signal
to the secondary earbud, the latter one will not connect with your device. As a result, in the
Bluetooth pairing list on your device, it may indicate that only one side is connected while the
other side is not.
• To pair with another Bluetooth device, turn off Bluetooth on the currently connected
device rst.
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the ear tips that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
Controls
Play / Pause
1
R\L
Press (R/L)
Next track
2
R
Press twice (R)
Previous track
2
L
Press twice (L)
Volume up / down Control volume via the connected device
Answer / End a call
1
R\L
Press (R/L)
Reject a call
1”
R\L
Press and hold for 1 second (R/L)
Enable mono mode Remove either one of the earbuds off your ear and press and hold
the button on the other earbud for 1 second
Activate Siri or other voice
assistant software
1”
Voice Assistant
R\L
Press and hold for 1 second (R/L)
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds until the LED indicators ash red 3
times and then turn white.
All the memory data will be cleared.
Obsah je uzamčen
Dokončete, prosím, proces objednávky.
Následně budete mít přístup k celému dokumentu.
Proč je dokument uzamčen? Nahněvat Vás rozhodně nechceme. Jsou k tomu dva hlavní důvody:
1) Vytvořit a udržovat obsáhlou databázi návodů stojí nejen spoustu úsilí a času, ale i finanční prostředky.
Dělali byste to Vy zadarmo? Ne*. Zakoupením této služby obdržíte úplný návod a podpoříte provoz a
rozvoj našich stránek. Třeba se Vám to bude ještě někdy hodit.
*) Možná zpočátku ano. Ale vězte, že dotovat to dlouhodobě nelze. A rozhodně na tom nezbohatneme.
2) Pak jsou tady „roboti“, kteří se přiživují na naší práci a „vysávají“ výsledky našeho úsilí pro svůj
prospěch. Tímto krokem se jim to snažíme překazit.
A pokud nemáte zájem, respektujeme to. Urgujte svého prodejce. A když neuspějete, rádi Vás uvidíme!
Andere Handbücher für Life Note
2
Andere Soundcore Kopfhörer Handbücher
Soundcore
Soundcore Liberty Air 2 Bedienungsanleitung
Soundcore
Soundcore Spirit 2 Bedienungsanleitung
Soundcore
Soundcore Life P3i Installationsanleitung
Soundcore
Soundcore A3850 Bedienungsanleitung
Soundcore
Soundcore Liberty Air 2 Pro Bedienungsanleitung
Soundcore
Soundcore Life P3 Bedienungsanleitung
Soundcore
Soundcore Life P2 Mini Bedienungsanleitung
Soundcore
Soundcore VR P10 Bedienungsanleitung
Soundcore
Soundcore Life P3 Bedienungsanleitung
Soundcore
Soundcore Liberty 3 Pro Bedienungsanleitung
Soundcore
Soundcore Soundcore Life P2 Bedienungsanleitung
Soundcore
Soundcore Life P3i Bedienungsanleitung
Soundcore
Soundcore Life Dot 2 Bedienungsanleitung
Soundcore
Soundcore Life Q10 Bedienungsanleitung
Soundcore
Soundcore Life P2 Mini Bedienungsanleitung
Soundcore
Soundcore Liberty Air 2 Bedienungsanleitung
Soundcore
Soundcore Liberty 2 Bedienungsanleitung
Soundcore
Soundcore Life Note 3 Bedienungsanleitung
Soundcore
Soundcore Life U2 Bedienungsanleitung
Soundcore
Soundcore A25i Bedienungsanleitung
