Soundcore Sport X10 Installationsanleitung

FAQ For Soundcore Sport X10

Wearing

Q: What should I do if Sport X10 are uncomfortable and have an unstable fit?

A: We suggest trying the following:

- Choose the ear tips that fit your ears the best.

- Rotate the ear hook to open.

- Insert the earbud into your ear.

- Hook the ear hook over your ear and find a suitable position for the best fit.

Q: Can the ear hooks be detached or rotated 360 degrees?

A: The ear hooks cannot be detached and can rotate up to 210 degrees.

Bluetooth

Q: How do I reset Sport X10 earbuds?

A: 1. Place the earbuds in the charging case and leave the case open.

2. Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

Q: What should I do if any of the following problems occur?

1. Cannot pair or reconnect with my device.

2. One side does not pair with the other side or my device.

3. No music plays after connecting with my device.

4. Only one earbud has sound.

A: 1. Remove the protective film covering the connectors on the earbuds.

2. Reboot the Bluetooth device you're using (such as a phone or computer). Forget all the

pairing records of your earbuds on your device and turn off Bluetooth.

3. Reset the earbuds as per the steps below (make sure your earbuds have enough battery).

- Place the earbuds in the charging case and leave the case open.

- Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

When resetting the earbuds, make sure the earbuds are properly connected with charging

points in the case, or it may cause resetting failure.

4. Turn on the Bluetooth of your device and search for Soundcore Sport X10 and pair.

If there is a pop-up window to confirm pairing for "Soundcore Sport X10," please select

"Pair." If you accidentally select "Cancel," you need to refresh (turn off and turn on) the

Bluetooth of your device and pair the earbuds again.

Q: What should I do if Sport X10 earbuds disconnect or the sound is choppy?

A: Please note that this doesn't necessarily mean there is an issue with the earbuds, but may

have something to do with the connected device and environment. Bluetooth signals may be

influenced by obstructions, such as walls, pillars, home appliances, Wi-Fi, and more. To

ensure a stable connection, we recommend avoiding such obstructions.

To fix this issue, please try the following:

1. Fully charge and reset your earbuds as stated below and re-pair them.

- Place the earbuds in the charging case and leave the case open.

- Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

2. Check the earbuds by listening to a downloaded song/video.

3. Check the earbuds with another Bluetooth device in a different environment to see if it

works well.

Q: What should I do if Sport X10 connects to my device when they are in the case?

A: 1. Rotate the ear hook to "closed" position.

2. Clean the earbuds and make sure they are dry.

3. Put your earbuds into the charging case and close the lid.

4. Wait for 6 seconds and open the lid.

5. If it fails, try again.

Q: What should I do if the left and right earbuds are connected with 2 different devices?

A: When this happens, your earbuds are both in Mono mode. To return to Stereo mode:

1. Put both earbuds back into the charging case and close it.

2. Turn off the Bluetooth on one of your two devices.

3. Make sure there is only one discoverable Bluetooth device in range.

4. Open your case and remove both earbuds. They will reconnect with the Bluetooth device

in Stereo mode.

Q: How do I connect Sport X10 with a TV, computer, or other Bluetooth device?

A: 1. Make sure the earbuds are fully charged and turned on.

2. Open the charging case and ensure the earbuds are in it. The earbuds will enter pairing

mode.

3. Open the Bluetooth list on your device and select "Sport X10".

4. When successfully connected, the 3 LED indicators will turn steady white for 3 seconds

and then turn off.

Q: What is Sport X10's Bluetooth range?

A: The Bluetooth range is 10m/33ft.

Q: What audio codecs does Sport X10 support?

A: Sport X10 supports SBC and AAC.

Q: What is the Bluetooth version?

A: Bluetooth 5.2

APP

Q: What should I do if I can't find Sport X10 in the Soundcore app?

A: 1. Pair the earbuds with your phone. Currently, the Soundcore app is not available for

computers.

2. Open the Soundcore app, choose "Add Devices" > Headphones, Speakers, and Frames to

find your device.

3. If you cannot find Sport X10 in the list, please choose“Set up Manually” > Sport > Sport

X10.

4. If you cannot find Sport X10 in the list, please update the app to the latest version (3.0.1

or above). Alternatively, you can uninstall then reinstall the Soundcore app. If the problem

still persists, contact us and let us know the version of the Soundcore app and the phone

model you're using so we can assist you better.

Q: How do I use Sport X10's breathing training feature?

A: 1. This feature can only be used when Sport X10 is connected to your phone.

2. Connect Sport X10 to the Soundcore app. Select "Breathe", then choose the mode you

want to use and "Press to Start".

3. If you want to end the training, press the center of the breath circle.

4. If you want to set a timer and choose background music, go to "Settings" in the upper

right corner to create a new custom mode. You can customize the inhale and exhale

duration and choose background music.

Sound

Q: What should I do if Sport X10 has low volume when connected to a phone?

A: You can try the following:

1. Reset the earbuds. Make sure your earbuds have enough power, then:

- Place the earbuds in the charging case and leave the case open.

- Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

2. Clear all the pairing records on your phone and re-pair your earbuds. Turn the volume

down one notch on your phone. Then turn up the volume of both your phone and earbuds

with the song/video to the maximum.

3. Use a cotton swab with a bit of rubbing alcohol to gently clean the metal mesh filter

under the rubber ear tips.

Q: What should I do if Sport X10 has low volume when connected to a Mac computer?

A: You can try the following:

1. Reset the earbuds. Make sure your earbuds have enough power, then:

- Place the earbuds in the charging case and leave the case open.

- Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

2. Clear all pairing records on your Mac computer and re-pair your earbuds. Turn the

volume down one notch on your Mac computer. Then turn up the volume of your computer,

earbuds and music/video to the maximum.

3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the

rubber ear tips.

Q: What should I do if Sport X10 has low volume when connected to a Windows computer?

A: You can try the following:

1. Reset the earbuds. Make sure your earbuds have enough power, then:

- Place the earbuds in the charging case and leave the case open.

- Press and hold the button on the charging case for 10 seconds until the LED indicators on

the case flash white 3 times and then flash in sequence. This confirms that the reset was

successful and your earbuds can be connected normally.

2. Clear all the pairing records on your Windows computer and re-pair your earbuds. Make

sure you choose the right mode (For audio/video, choose Stereo, and for the mic, choose

Hands-Free). Turn up the volume of your computer, earbuds, and song/video to the

maximum.

3. Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the

rubber ear tips.

Q: How do I select the audio input and output on a Windows computer when using Sport

X10?

A: 1. If you only want to listen to audio on the computer, select "Sport X10" for the

computer audio. If you need to adjust the volume, adjust both the software and the

computer volume.

2. If you need to use a conference app on your computer such as Zoom/Microsoft Teams,

please set the input and output of the software as stated below:

- Microphone for software: Sport X10 Hands-Free

- Speaker for App: Sport X10 Hands-Free

If you need to adjust the volume, use the app. If you cannot adjust the volume on the app,

please select "Sport X10 Hands-Free" as the output on your computer and adjust the volume.

3. If you need to use an audio and video app on your computer and you cannot set the input

and output on the app, open the computer audio settings and choose the following settings:

Input: Sport X10 Hands-Free

Output: Sport X10 Hands-Free

Q: What should I do if call quality is poor when using Sport X10?

A: 1. Make sure you have raised both the volume of the earbuds and the connected device to

the maximum.

2. Make sure you're wearing the earbuds in the correct position to create a tight seal.

3. Try switching to the phone mic and make a call to see if the problem still persists.

Q: Why do I suddenly hear obvious external noise when talking in ANC mode?

A: During calls, Sport X10 will automatically switch to Normal mode, so that you can

receive your own voice feedback in real time.

Q: Why does the person on the other end of the call only hear a low and unclear voice?

A: You can try the following:

- If you only use one earbud, make sure the other earbud is in the charging case.

- Try different sizes of ear tips that come with the earbuds and make sure you're wearing

them in the correct position to create a tight seal.

- Please make sure the audio output device chosen is "Soundcore Sport X10" on the

connected device.

- If you make a call via an app, please try using your phone to make a call and see if the

problem still persists.

- Try testing your earbuds with a different Bluetooth device in a different environment to see

if it makes any difference.

Q: What should I do if Sport X10 has poor sound quality?

A: You can try the following:

- Try different sizes of the included ear tips and make sure you're wearing the earbuds in the

correct position so they create a tight seal. This will enhance the sound quality and noise

cancellation effect.

- Try different types of music and make sure the input audio source has no distortion or

other noises.

- Try different EQ modes on the Soundcore app and customize the EQ to your preference.

Q: What should I do if the bass is weak, especially when using ANC and Transparency

modes?

A: 1. Try different sizes of the included ear tips and make sure you're wearing the earbuds in

the correct position so they create a tight seal. This will enhance the sound quality and noise

cancellation effect.

2. Turn on "BassUp" in the Soundcore app.

Q: When exercising, which mode should I use?

A: Normal mode is recommended during exercise.

Q: What should I do if I experience a "stethoscope effect" (hearing noises like rustling or

thumps) when exercising while wearing Sport X10?

A: We recommend turning off noise cancelling mode. Try using normal mode to see if it

reduces the effect.

Q: What should I do if wind noise affects listening to music when ANC or Transparency

mode is turned on?

A: Open the Soundcore app and press “Settings” in the top right corner to open “Wind Noise

Cancellation". The earbuds will automatically reduce the FF MIC gain when wind noise is

detected to reduce its effect when listening to music or making calls.

Charging

Q: How long does it take to fully charge Sport X10's earbuds?

A: It takes about 1 hour to fully charge the earbuds.

Q: How long does it take to fully charge Sport X10's charging case?

A: It takes about 2 hours to fully charge the charging case.

Q: Does the charging case support wireless charging?

A: No, it doesn't.

Q: What should I do if any of the following problems occur? 1) The earbuds don’t recharge

in the charging case. 2) The earbuds stay connected to the device even after being placed in

the charging case with the lid closed. 3) The earbuds don't turn on when taken out of the

charging case.

A: 1. Confirm the charging case has power left (open the charging case to check if there is

white light flashing).

2. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to

ensure all charging contact pins on the earbuds and charging case are completely clean and

dry from sweat and water. Then put the earbuds correctly into the case. The first light

flashes twice when the left earbud is placed in the case. The third light flashes twice when

the right earbud is placed in the case.

3. Please use the certified charging cable and wall charger;

4. Please check whether the ear tips are installed properly;

Q: How many times can Sport X10's charging case recharge the earbuds?

A: When the charging case is fully charged, it can fully charge the earbuds 3 times. On the

4th time it will partially charge the earbuds to approximately 60%.

Q: What is the battery life of Sport X10's earbuds in different modes?

A: Normal: 8H (single charge) / 32H (with charging case)

ANC: 6H (single charge) / 24H (with charging case)

Transparency: 7H (single charge) / 28H (with charging case)

Call: 5H (single charge) / 20H (with charging case)

Q: What waterproof rating do Sport X10's earbuds have?

A: Sport X10 earbuds have an IPX7 waterproof rating. The charging case does not have a

waterproof rating. Note:

- Do not place earbuds and the charging case into a washing machine.

- Make sure that the earbuds and the charging case are dry before charging.

Q: What do the LED indicators on the charging case mean?

A: - Left LED flashes white for 3 seconds: Only 0-5% battery remaining.

- Left LED is steady white for 3 seconds: 6-30% battery remaining.

- 2 LEDs on left side are steady white for 3 seconds: 31-70% battery remaining.

- All LEDs are steady white for 3 seconds: 71-100% battery remaining.

- The left LED flashes twice when the left earbud is placed in the case.

- The right LED flashes twice when the right earbud is placed in the case.

Q: What do the LED indicators on the charging case mean when charging？

A: - No power source connected to the charging case: 3 LEDs are turned off.

- Charge to 0-30%: The left LED flashes white continuously, and the other two LEDs are off.

- Charge to 31-70%: The LED on the left is steady white, the middle LED flashes white

continuously, and the right LED is off.

- Charge to 71-99%: The left two LEDs are steady white, and the right LED flashes white

continuously.

- When fully charged, all LED indicators are steady white for 1 minute.

- Unplug after fully charged: All LEDs are turned off.

Q: When do the LED indicators on the charging case indicate "Pairing Mode"?

A: The 3 LEDs on the charging box flash white continuously. If the earbuds are not

successfully connected after 10 minutes they will turn off.

Q: When do the LED indicators on the charging case indicate "Successful Pairing"?

A: The 3 LEDs are steady white for 3 seconds then turns off.

Q: When do the LED indicators on the charging case indicate "Reset"?

A: Place the earbuds in the charging case and leave it open. Press and hold the button on the

case for 10 seconds until the 3 LEDs flash white 3 times at the same time.

Andere Handbücher für Sport X10

Andere Soundcore Kopfhörer Handbücher

Soundcore

Soundcore Liberty Air 2 Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Pro Bedienungsanleitung

Soundcore

Soundcore A3910 Bedienungsanleitung

Soundcore

Soundcore Life U2 Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Bedienungsanleitung

Soundcore

Soundcore Space Q45 Bedienungsanleitung

Soundcore

Soundcore Space Q45 Bedienungsanleitung

Soundcore

Soundcore Strike 3 Bedienungsanleitung

Soundcore

Soundcore Liberty 3 Pro Bedienungsanleitung

Soundcore

Soundcore Life Dot 3i Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Spirit 2 Bedienungsanleitung

Soundcore

Soundcore Life Dot 2 NC Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Bedienungsanleitung

Soundcore

Soundcore Space A40 Bedienungsanleitung

Soundcore

Soundcore Liberty 3 Pro Bedienungsanleitung

Soundcore

Soundcore Liberty Neo Bedienungsanleitung

Soundcore

Soundcore Life Tune Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Bedienungsanleitung

Soundcore

Soundcore A3911 Bedienungsanleitung

Soundcore

Soundcore Vortex Bedienungsanleitung

Soundcore

Soundcore Life P3i Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung