Soundcore Liberty Neo 2 Bedienungsanleitung

Soundcore Liberty Neo 2

USER MANUAL

English 01

Čeština 07

Dansk 13

Deutsch 19

ελληνικά 25

Español 32

Suomi 38

Français 44

Magyar 50

Italiano 56

Nederlands 62

Norsk 68

Język polski 74

Português 80

Pусский 86

Slovenský Jazyk 93

Slovenski Jezik 99

Svenska 105

Türkçe 111

Portugues do Brasil 117

日本語 124

한국어 131

简体中文 138

繁體中文 144

ةيِبَ

رَعل 150

תי ִ

רבִע157

Charging

•Fully dry off the earbuds and the USB port before charging.

•Use a certified USB-C charging cable and charger to prevent any damage.

•Fully charge both the earbuds and the charging case before the first use.

1. Place the earbuds in the charging case and close it.

2. Connect the charging case to the power supply by using a USB-C charging

cable. Alternatively, position the charging case at the center of your wireless

charging for wireless charging.

•The LED indicators on the charging case indicate the charging status.

Wearing

1. Choose the EarTips and EarWings that fit your ears best.

2. Insert the earbuds into the inner canal of your ears and turn gently until you

find the most comfortable and secure position.

•Your earbuds come with multiple pairs of EarTips and EarWings, among which

Medium-sized are pre-installed.

Powering On/Off

The earbuds will automatically power on when taken out of the charging case.

•The LED indicator on earbuds will light up white for 1 second.

To power off, place the earbuds into the charging case.

•The earbuds will automatically power off after 2 minutes if no device is

connected.

•To manually power on, press and hold the multi-function button on both

earbuds for 2 seconds until the LED indicator turns white for 1 second.

•To manually power off, press and hold the multi-function button on either

earbud for 8 seconds until the LED indicator turns red for 1 second.

Bluetooth Pairing

1. Take the earbuds out of the charging case, the earbuds will automatically

enter the Bluetooth pairing mode.

•The LED indicator on earbuds will flash white.

2. Select “Soundcore Liberty Neo 2” on your device’s Bluetooth list to connect.

When successfully connected, the LED indicator on earbuds will turn off.

•To manually enter the pairing mode, take either earbud out of the charging case,

turn it off, and then press and hold the multi-function button for 3 seconds until

entering the pairing mode, and then take the other one from the case.

•Each time you power on your Soundcore earbuds, they will automatically

connect to your last successfully connected device if available within the

Bluetooth range.

•Mono mode: When Bluetooth connected, you can use either one of the earbuds

only by placing the other one into the charging case.

•When powered on and connected, if either one of the earbuds is out of battery

and powered off, you can keep using the other one.

•When you are on a call, place either one of the earbuds into the charging case,

and the microphone in the other earbud will be activated.

Controls

Play/Pause

Press twice (R)

Next track

Press and hold for 1 second (R)

Previous track

Press and hold for 1 second (L)

Volume up

Press once (R)

Volume down

Press once (L)

Answer/End a call

Press once (L/R)

Answer a second incoming call and put the

current call on hold

Reject a call

Press and hold for 1 second (L/R)

Transfer a call between earphones and

mobile phone

Switch between a call on hold and an

active call

Activate Siri or other voice assistant

software

Press twice (L)

Mono mode

Play/Pause

Press twice

Next track

Press and hold for 1 second

Volume up

Press once

Answer/End a call

Press once

Reject a call

Press and hold for 1 second

Activate Siri or other voice assistant

software

Press three times

Soundcore App

Download the Soundcore app to enhance your experience.

User interface customization: In stereo mode, all of the controls (e.g. adjust

volume, control playback, activate Siri) can be customized in the app.

EQ settings: There are more than 20 EQ settings you can choose from in the app

to optimize your experience while enjoying different music genres.

Earbuds firmware update: You will be informed once the new version of firmware

is detected when you connect the earbuds with the app. Ensure the earbuds are

out of the charging case and continuously connected with your device until the

firmware upgrade is completed. During the upgrade, ensure the earbuds are

close to your device and avoid any operation.

Reset

You might need to reset the earbuds if you experience any connectivity problems

or function issues.

1. Place the earbuds in the charging case and make sure they are being charged.

2. Press and hold the button on both earbuds for 8 seconds until the earbud LED

indicators flash red for 3 times.

3. Take the earbuds out of the charging case and wait until the LED indicator on

one of the earbuds flashes fast while the other breathes slowly. This confirms

that the reset was successful and your earbuds can be connected normally.

Specifications

•Specifications are subject to change without notice.

Input

5V 0.7A

Rated output power

5 mW (@1% THD)

Battery capacity

85 mAh x 2 (earbuds)

770 mAh (charging case)

Charging time

2 hours

Playtime

(varies by volume level and content)

Up to 10 hours

(Total 40 hours with the charging case)

Driver size

8 mm x 2

Frequency response

20 Hz - 20 kHz

Impedance

16 Ω

Waterproof level

IPX7

Bluetooth version

V 5.2

Bluetooth range

10 m / 33 ft

Nabíjení

•Sluchátka a port USB před nabíjením úplně vysušte.

•Použijte pouze certifikovaný nabíjecí kabel a nabíječku USB-C, abyste zabránili

poškození.

•Před prvním použitím sluchátka i nabíjecí pouzdro úplně dobijte.

1. Sluchátka vložte do nabíjecího pouzdra a zavřete ho.

2. Nabíjecí pouzdro pomocí nabíjecího kabelu USB-C připojte do elektřiny.

Pokud používáte bezdrátové nabíjení, můžete místo toho nabíjecí pouzdro

umístit do středu bezdrátového nabíjení.

•LED kontrolky na nabíjecím pouzdře zobrazují stav nabíjení.

Nošení

1. Zvolte si nástavce EarTip a raménka EarWing, které vám nejlépe sedí v uších.

2. Sluchátka vložte do vnitřních kanálků v uších a jemně je otáčejte, dokud

nenajdete nejpohodlnější a nejjistější polohu.

•Sluchátka jsou dodávána s několika páry nástavců EarTip a ramének EarWing,

nasazeny jsou ty střední velikosti.

Zapnutí/Vypnutí

Sluchátka se zapnou automaticky při vytažení z nabíjecího pouzdra.

•LED kontrolka na sluchátkách se rozsvítí po dobu 1 sekundy.

Chcete-li sluchátka vypnout, vložte je do nabíjecího pouzdra.

•Sluchátka se automaticky vypnou po 2 minutách, když není připojené žádné

zařízení.

•Pokud je chcete zapnout ručně, stiskněte a podržte multifunkční tlačítko na

obou sluchátkách po dobu 2 sekund, dokud se LED kontrolky nerozsvítí bíle na 1

sekundu.

Inhaltsverzeichnis

Sprachen:

Andere Soundcore Kopfhörer Handbücher

Soundcore

Soundcore Life Q10 Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Bedienungsanleitung

Soundcore

Soundcore Q20i Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Bedienungsanleitung

Soundcore

Soundcore Space NC A3021 Bedienungsanleitung

Soundcore

Soundcore A3911 Bedienungsanleitung

Soundcore

Soundcore Liberty 2 Pro Bedienungsanleitung

Soundcore

Soundcore Life A1 Bedienungsanleitung

Soundcore

Soundcore Sport X10 Bedienungsanleitung

Soundcore

Soundcore Life Q30 Bedienungsanleitung

Soundcore

Soundcore Sport X10 Installationsanleitung

Soundcore

Soundcore A3951 Bedienungsanleitung

Soundcore

Soundcore Space A40 Bedienungsanleitung

Soundcore

Soundcore Life Q20+ Bedienungsanleitung

Soundcore

Soundcore Life P3 Bedienungsanleitung

Soundcore

Soundcore Strike 3 Bedienungsanleitung

Soundcore

Soundcore Life 2 Bedienungsanleitung

Soundcore

Soundcore Life A2 NC Bedienungsanleitung

Soundcore

Soundcore Spirit 2 Bedienungsanleitung

Soundcore

Soundcore Life Dot 2 NC Bedienungsanleitung

Soundcore

Soundcore Life Dot 2 Bedienungsanleitung

Soundcore

Soundcore Liberty 3 Pro Bedienungsanleitung

Soundcore

Soundcore Life Q20+ Bedienungsanleitung

Soundcore

Soundcore AeroFit Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung