SOYO SY-6BB V1.0 Bedienungsanleitung

SY-6BB V1.0

Mainboard

Quick Start Guide

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-6BB V1.0 Mainboard

Pentium

II processor & Celeron

processor

82440 BX AGP/PCI Mainboard

66&100MHz Front Side Bus supported

AT/ATX Power Connectors

Trademarks:

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their

owners.

Product Rights:

Product and corporate names mentioned in this publication are used for identification purposes

only and may be registered trademarks or copyrights of their respective companies.

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to revise the manual or make changes in the specifications of the

product described within it at any time without notice and without obligation to notify any

person of such revision or change. The information contained in this manual is provided for

general use by our customers. Our customers should be aware that the personal computer field is

the subject of many patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights

of third parties and not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide is for assisting system manufacturers and end users in setting up and

installing the mainboard. Information in this guide has been carefully checked for reliability;

however, no guarantee is given as to the correctness of the contents. The information in this

document is subject to change without notice.

If you need any further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6BB QSG Version 2.0 - Edition: September 1998

*Thesespecificationsaresubjecttochangewithoutnotice

SY-6BB V1.0

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6BBV1.0

Mainboard.ThisQuickStartGuide

describesthestepsforinstallingandsettingupyournewmainboard.

Thisguideisdesignedforalluserstoprovidethebasicstepsof mainboardsettingand

operation.Forfurtherinformation, pleasereferto SY-6BBV1.0MainboardUser'sGuideand

TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyourmainboard.

Unpacking

*Ifyourboardcomeswithadriverdiscandapapermanual,theQuickStartGuideandtheCD-ROMarenotincludedinthepackage.

Whenunpackingthemainboard,checkforthefollowingitems:

TheSY-6BBV1.0 82440BX AGP/PCI Mainboard

ThisQuickStartGuide

TheInstallation CD-ROM

TheCPURetentionSet

OneIDEDeviceFlat Cable

OneFloppyDiskDriveFlatCable

Onedual25-pinparallelwith25-pinflatcableand9-pin

serialwith9-pinflatcableexternalconnector

Onedual6-pinPS/2mouseconnectorwith6-pinflatcable

and9-pinserialconnectorwith9-pinflatcable

SY-6BB V1.0 Quick Start Guide

Introduction

SY-6BB V1.0 Mainboard Layout

Key Features

SupportsIntelPentium

IIprocessor

(233-550MHz)Celeron

processors

(266-366MHz)

Auto-detectCPUvoltage

PC97,ACPI,UltraDMA/33MHz

Power-onbymodemoralarm

SupportsWake-On-LAN(WOL)

SupportsPower-OnbyKeyboard

Supportsonboardhardwaremonitoring

andincludes Hardware Doctor™utility

SupportsCreativeSB-LINK™(PC-PCI)

forPCIaudiocard

1x32-bitAGPslot

3x32-bitbusmasteringPCIslots

1xIrDAport

Supportsmultiple-bootfunction

DMIutility

AT/ATXpowerconnectors

Flash BIOS

JP44

IR1

JP5 1

3V Lithium

Battery

CHAFAN

SB-LINK™

Intel®

82371 EB

Intel®

82443 BX

AGP Slot

CPUFAN

PCI Slot #1

PCI Slot #2

PCI Slot #3

ISA Slot #1

ISA Slot #2

ISA Slot #3

DIMM 1

DIMM 2

DIMM 3

IDE 1IDE 2

Slot 1 for

Pentium®II Processor

PRT 1

COM 1

COM 2 FDC

ITE8671

Connector

PS/2 Mouse

Connector

ATX Power

AT Power

Speaker

Keylock

Power

LED

Reset

PWRBT

Turbo

LED

HDD LED

1 1

JP50

CMOS Clear

Jumper

WOL

Header

USB

SW1

(PC-PCI)

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Toavoiddamagetoyourmainboard,followthesesimpleruleswhile

handlingthisequipment:

Beforehandlingthemainboard,groundyourselfbygraspinganunpaintedportionof

thesystem'smetalchassis.

Removethemainboardfromitsanti-staticpackaging.Holditbytheedgesandavoid

touchingitscomponents.

Checkthemainboardfordamage.Ifanychipappearsloose,presscarefullytoseatit

firmlyinitssocket.

Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect

installationofyournew

SY-6BBV1.0

Mainboard.Fordetailedinformation,pleasereferto

SY-6BBV1.0MainboardUser'sguideandTechnical Reference onlinemanualincludedon

theCD-ROMpackedwithyourmainboard.

PREPARATIONS

Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation

successfully:

Pentium

processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule

Computercaseandchassiswithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice

VGACard

SoundCard(optional)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem-(optional)

InternalPeripherals:ModemandLANcards(optional)

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Install the Mainboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6BBV1.0

Mainboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPU

thatshouldbeclearlymarkedontheCPUcover.

233MHz (66 x 3.5) 333MHz (66 x 5.0) 450MHz (100 x 4.5)

266MHz (66 x 4.0) 350MHz (100 x 3.5) 500MHz (100 x 5.0)

300MHz (66 x 4.5) 400MHz (100 x 4.0) 550MHz (100 x 5.5)

CPU Mount Procedure:

TomountthePentium

IIprocessorthatyouhave

purchasedseparately,followthese instructions.

Unpack the Retention Kit 2

Position the Mainboard 3

Insert the Screws

Install the Supporting Base

Install the Retention Clip 6

Install the CPU

Install the Support Clip 8

Insert the Latches 9

Remember to connect the CPU

Cooling Fan to the CPUFAN

power connector on the

mainboard.

Supporting Base

Support Clip

Screws (x2)

Retention Clip

Latches (x2)

Slot 1

HeatSink

ATXPower

Larger Pinhole

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Step 2. Make Connections to the Mainboard

Thissectiontellshowtoconnectinternalperipheralsandpowersupplytothemainboard.

InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,Chassis Fan,

FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock

Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6BB

V1.0Mainboard,pleasereferto SY-6BBV1.0MainboardUser'sGuideandTechnical

ReferenceonlinemanualonCD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link™(PC-PCI) Wake-On-LAN Header: JP44

Connect the SB-Link™(PC-PCI) cable from your

PCI audio card to this header. Connect the WOL cable from

your LAN card to JP44.

CPU Cooling Fan: CPUFAN

Connect the CPU cooling fan cable to the CPUFAN power connector.

Chassis Fan: CHAFAN

Connect the case cooling fan cable to the CHAFAN power connector.

USB TB LED SPK

Plug your USB devices

to this header. Connect your Turbo LED

cable to this header. Connect the speaker cable to

this header.

RESET IDE LED KB-LOCK

Connect the reset button

to this header. Connect the IDE device

LED to this header. Connect the Power LED and the

KB Lock switch to this header.

IrDA (Infrared Device Header): IR AT Power Cable

Connect the cable from your IrDA device

to this header. Connect the AT Power cable to this

connector. If you use AT power supply.

ATX Power On/Off: PWRBT ATX Power Supply: ATX PW

Connect your power switch to this

header (momentary switch type).

To turn off the system,

please press this switch and

hold down for longer than

4 seconds.

Attach the ATX Power cable to this connector. If

you use ATX power supply.

When using the Keyboard Wake-Up

function, please make sure the ATX

power supply can take at least 720mA

load on the 5V Standby lead (5VSB) to

meet the standard ATX specifications.

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

YourboardcomeswiththreeDIMMsockets,providingsupportforupto768MBofmain

memoryusingDIMMmodulesfrom8MBto256MB.For66MHzfrontsidebusCPUsuse

12nsorfastermemory;for100MHzfrontsidebusCPUsuse8ns(100MHz,PC100

compliant)memory.

Memory Configuration Table

Number of

Memory Modules DIMM 1 DIMM 2 DIMM 3

13rd

22nd 3rd

31st 2nd 3rd

RAM Type SDRAM

Memory Module

Size (MB) 8/16/32/64/128/256 Mbytes

Note:(1) 256 MB memory modules available on PC registered DIMM only.

(2) Always install memory modules in the order prescribed in this table.

(3) Do not install unbuffered and registered memory modules together.

Important:

ItisofprimeimportancethatyouinstallDIMMmodulesasoutlinedinthetable

aboveinordertopreservesignalintegrityon100MHzfrontsidebussystems.

Step 4. Set SW1 for power up FSB clock and AGP bus clock.

SW1isusedtoadjustAGPbusclockfrequencydependingonthevalueofthefrontsidebus

(FSB)clock,alsothesettingoftheSW1determinesthepowerupFSBclockwhichwill

remaineffectiveuntiltheBIOSsettheFSBclocktotheCMOSsetting.

SW1 Setting Power up FSB Clock AGP Clock

66MHz AGP Clock

= FSB Clock ÷1

100MHz AGP Clock

= FSB Clock ÷1.5

Note:Thespecification ofmaximumAGP bus Clockfrequencyis 66.6MHz.

∗

SetSW1toopenwhenyouuseaFSB100MHzCPUsuchas350MHz,400MHz,

450MHz,or500MHz.

∗

SetSW1toclosewhenyouuseaFSB66MHzCPUsuchas233MHz,266MHz,

300MHz,333MHz,or366Mhzonlyfor Celeron.

∗

SetSW1toopenwhenyouuseaFSB66MHzbutwanttooverclocktheFSBclockto

100MHzviatheBIOSsetting.

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Step 5. Set the CPU Frequency

YoudonotneedtosetanyjumperfortheCPUfrequency.Instead,CPUsettingarechanged

throughtheBIOS[CHIPSETFEATURESSETUP].Pleasereferto Chapter3-QuickBIOS

SetupfordetailsonhowtosetthePentium

IIprocessorfrequency.

Step 6. Enable/Disable Power-On by Keyboard (JP50)

YoucanchoosetoenablethePower-OnbyKeyboardfunctionbyshortingpin1-2onjumper

JP50,otherwise,shortpin2-3todisablethisfunction.

Power-On by

Keyboard Enable Disable

JP50 Setting

Short pin 2-3 to enable the

Power-On by Keyboard function. Short pin 1-2 to disable the

Power-On by Keyboard function.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply can take at least 720mAmp load on the 5V Standby lead (5VSB)

to meet the standard ATX specification.

Step 7. Clear CMOS Data (JP5)

CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5

seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily

identifiedbyitswhitecoloredcap.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JP5 Setting Short pin 2-3 for

at least 5 seconds

to clear the CMOS.

Short pin 1-2

to retain the

new settings.

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

SY-6BB V1.0

Quick Start Guide

Hardware

Installation

Note on Over-clocking Capability

TheSY-6BBV1.0mainboardprovidesover-clockingcapability.Duetotheover-

clockingsettingyoursystemmayfailtobootuporhangduringruntime.Ifthisoccurs,

pleaseperformthefollowingstepstorecoveryoursystemfromtheabnormalsituation:

Turnoffsystempower(IfyouuseaATXpowersupply,sometimesyouhavetopress

thepowerbuttonformorethen4secondstoshutdownthesystem)

SettheSW1toshortifyouuseaFSB66MHzCPU

Pressandholddownthe<Insert>keywhileturningonthesystempower.Keep

holdingdownthe<Insert>keyuntilyouseethemessageoftheCPUtypeand

frequency(133MHzor200MHz)appearonscreen

Pressthe<Del>keyduringthesystemdiagnosticcheckstoentertheAwardBIOS

Setupprogram

FromtheBIOSmainmenu,select[CHIPSETFEATURESSETUP]andmovethe

cursortothe[CPUFrequency]fieldtosettheproperworkingfrequency

Select[Save&ExitSETUP]andpress<Enter>tosavetheconfigurationtothe

CMOSmemory,andcontinuethebootsequence

Note: SOYOdoesnotguaranteesystemstabilityiftheuseroverclocksthesystem.

Anymalfunctions dueto over-clocking arenot coveredbythewarranty.

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-6BA+ Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-D6IBA Bedienungsanleitung

SOYO

SOYO SY-K7ADA Bedienungsanleitung

SOYO

SOYO SY-P4RS300 Bedienungsanleitung

SOYO

SOYO 82440 FX Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO SC-5EA5 Kurzanleitung

SOYO

SOYO SY-K7VTA-B Bedienungsanleitung

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7IWB V1.0 Bedienungsanleitung

SOYO

SOYO Motherboard SY-6BA+ IV Bedienungsanleitung

SOYO

SOYO SY-6VBA 133 Bedienungsanleitung

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Bedienungsanleitung

SOYO

SOYO SY-KT400 Dragon Ultra Bedienungsanleitung

SOYO

SOYO SY-K7VMP Bedienungsanleitung

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO TechAID Bedienungsanleitung

SOYO

SOYO SY-D6IBA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7ISA+ Bedienungsanleitung

SOYO

SOYO SY-7IWM Bedienungsanleitung

SOYO

SOYO 5EA5 Gebrauchs- und Pflegehandbuch

SOYO

SOYO DRAGON Lite SY-KT333 Bedienungsanleitung

SOYO

SOYO SY-KT333 DRAGON Plus Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung