SOYO SY-P4IS2 Bedienungsanleitung

SY-P4IS2

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-P4IS2 Motherboard

mPGA Socket 478 processors

Intel i845 AGP/PCI/CNR Motherboard

400 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

Allnames ofthe productand corporatementioned inthis publicationare usedfor identification

purposesonly.Theregisteredtrademarksandcopyrightsbelongtotheirrespectivecompanies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warrantiesregarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customersshouldbe aware that thepersonalcomputer field issubjectto many patents.Allof

ourcustomersshouldensurethattheiruseofourproductsdoesnotinfringeuponanypatents.It

isthe policy of Soyo ComputerInc. to respect the valid patent rights of third parties and notto

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject torestrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

ThisQuickStart Guide can helpsystemmanufacturers and endusersin setting upandinstalling

the Motherboard.Informationinthisguide has been carefully checked for reliability; however,

tothe correctness of the contents there is no guaranteegiven. Theinformation inthis document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

P4IS2 Serial -Version 1.0-Edition: July 2001

* These specifications are subject to amend without notice

SY-P4IS2 Quick Start Guide

Introduction

Congratulations on your purchase of the SY-P4IS2Motherboard. This Quick Start Guide

illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For

further information, please refer to the SY-P4IS2 Motherboard User's Manual that came with

your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:

The SY-P4IS2 i845 AGP/PCI/CNR Motherboard

This Quick Start Guide

The Installation CD-ROM

SOYO Bonus Pack CD-ROM

One IDE Device ATA 100 Flat Cable

One Floppy Disk Drive Flat Cable

One Heat Sink Compound

SY-P4IS2 Quick Start Guide

Introduction

SY-P4IS2 Motherboard Layout

(Optional)

USB 1 USB 2

PS/2KB

ConnectorPS/2MousePS/2Mouse

Connector

Lithium

Battery

IDE1IDE2

ATX Power

PCI#6

PCI#5

PCI#4

PCI#3

PCI#1

PCI#2

PRT

COM A

COM B

CNR1

SYSFAN

ITE

IT8712F-A

DIMM1

DIMM2

DIMM3

13 2

SMCARDCN

JP4

SIRCON

10 USB3_4

210

FDC1

WOL

Header

JP10

CMOS Clear

Jumper 1

JP5

CDIN

1 4

AOUT

AIN

AMIC

AGAME

Sigmatel

STAC9700

SW1

Power

LED

Keylock

Speaker

ACPI

LED

HDD

LED

PWRBT

Reset

J25

P1 P2

AGP Slot

SY-P4IS2 Quick Start Guide

Introduction

Key Features

Supports Intel®mPGA Socket 478

processors

-Pentium®4

Supports 400 MHz Front Side Bus

Frequency

PC99, ACPI

Ultra 33/66/100 (ATA 33/66/100)

Supports Wake-On-LAN (WOL)

Supports PC-133 Unbuffer SDRAM and

ECC

Supports ACPI Suspend Indicator

Power-on by modem, alarm and PS/2

Keyboard

Power failure resume

Supports Suspend to RAM

Supports onboard hardware monitoring

and includes Hardware Doctor™ utility

Supports AC97 Codec

Easy CPU settings in BIOS with the

“SOYO COMBO Setup”

-CPU voltage adjust

-CPU ratio adjust

-CPU FSB adjust

Supports multiple-boot function

AGP 2.0 Compliant;

AGP Connector supports:

-1.5V only AGP cards

-1X/2X/4X data transfer

Supports Communication Networking

Riser Slot (CNR 1.0 compliant) *

Smart Card Reader

-Compliant with Personal Computer

Smart Card (PC/SC)Working Group

standard

-Compliant with smart card (ISO 7816)

protocols

-Supports card present detect

-Supports Smart Card insertion

power-on feature

3 x DIMM slots for SDRAM memory

1 x 32-bit AGP slot

6 x 32-bit bus master PCI slots

4 x USB ports onboard

1 x IrDA port

ATX 12V power connector

SY-P4IS2 Quick Start Guide

Hardware

Installation

To avoid damage to your Motherboard, please follow these simple rules while

handling this equipment:

Before handling the Motherboard, ground yourself by touching on to an unpainted

portion of the system's metal chassis.

Remove the Motherboard from its anti-static packaging. Hold the motherboard by the

edges and avoid touching its components.

Check the Motherboard for damage. If any chip appears to be loose, press carefully

to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and

correct method to install your newSY-P4IS2Motherboard. For detailed information, please

refer to the SY-P4IS2 Motherboard User's Manual and Technical Referenceonline manual

on the CD-ROM that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:

Socket mPGA478 processor with built-in CPU cooling fan (boxed type)

SDRAM module (s)

Computer case with adequate power supply unit

Monitor

PS/2 Keyboard

Pointing Device (PS/2 Mouse)

Speaker(s) (optional)

Disk Drives: HDD, CD-ROM, Floppy drive…

External Peripherals: Printer, Plotter, and Modem (optional)

Internal Peripherals: Modem and LAN cards (optional)

VGA Card (AGP, PCI)

SY-P4IS2 Quick Start Guide

Hardware

Installation

Install the Motherboard

Follow the steps below in order to perform the installation of your newSY-P4IS2Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency: Record the working frequency of your mPGA

CPU that should be clearly marked on the CPU cover.

FSB 400MHz

1.5GHz(100x15.0) 1.6GHz(100x16.0) 1.7GHz(100x17.0) 1.8GHz(100x18.0)

1.9GHz(100x19.0) 2.0GHz(100x20.0)

CPU Mount Procedure: To mount the Pentium® 4 Socket mPGA478 processor

that you have purchased separately, follow these instructions.

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3. Seat the processor in the socket completely and without forcing.

4. Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard. The fan is a key component that stabilizes the

system. It prevents the equipment from overheating and prolongs the life of

your CPU.

SY-P4IS2 Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM),FloppyDiskDrive,Chassis

Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and

KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-P4IS2

Motherboard, please refer to SY-P4IS2 Motherboard User's Manual and Technical

Referenceonline manual on the CD-ROM.

Connectors and Plug-ins

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN Wake-On-LAN Header: JP10

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR

GND 12V SENSOR 5VSB GND MP-Wakeup

Standard IrDA (Infrared Device Header): SIRCON System Fan: SYSFAN

Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3

VCC NC IRRX GND IRTX GND 12V SENSOR

USB3 USB4

Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10

5VSB Data(-) Data(+) GND 5VSB Data(-) Data(+) GND GND

SMCARDCN

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10

Pin11

Pin12 Pin13

Pin14

VCC NC NC NC Scrfet

RST CLK NC NC Scrio GND Scrpres NC NC

Power LED Key Lock

Pin1 Pin2 Pin3 Pin1 Pin2

VCC NC GND Control Pin GND

Speaker

Pin1 Pin2 Pin3 Pin4

VCC NC NC Speaker out

HDD LED ACPI LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LED Anode LEDCathode

VCC3MEM

Control Pin Power On/Off

GND Power Good GND

Power On/Off: PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, press this switch and hold down for longer than 4 seconds.

ATX 12V Power Supply: ATX PW

AttachtheATX12VPowercabletothreeconnector.(ThismotherboardrequiresanATX12Vpowersupply,anAT

and ATX power supply can NOT be used.)

When using the Power-On by PS/2 Keyboard function, please make

suretheATXpowersupplyisabletoprovide

at least 720mA on the 5V Standby lead (5VSB).

Power LED Key Lock

Speaker

Reset

PWRBT

ACPI LED

HDD LED

SY-P4IS2 Quick Start Guide

Hardware

Installation

PS. Power supply must be use ATX 12V specification.

A new superset of the original ATX power supply is now defined. Named “ATX 12V,” this

new power supply is comprised of a standard ATX unit plus the following enhancements:

Increased +12 VDC output capability. Mother board components with unique voltage

requirements are increasingly expected to be powered via DC/DC converters off the

+12 VDC power supply output. This trend is due primarily to the higher power

conversion and transmission efficiencies of +12 VDC relative to +5 VDC or +3.3 VDC.

ATX12V power supplies should be designed to accommodate these increased +12

VDC current requirements and to address associated issues such as cross-regulation,

capacitive loading, transient surge tolerance, cable voltage drop, and cooling.

New +12 V power connector. To enable the delivery of more +12 VDC current to the

motherboard, a new 4-pin receptacle/header combination--the + 12 V power

connector–has been defined. The presence of the +12 V power connector

indicates that a power supply is ATX12V; the absence of the +12 V power

connector indicates that a supply is ATX.

Step 3. Configure Memory

Directly supports one SDR SDRAM channel, 64b wide (72b with ECC), providing

support max of 3 Double-Sided DIMMs with unbuffered PC133, No reqistered

DIMM support. The largest memory capacity possible is 3GB using 512Mb

technology maximum memory bandwidth of 1GB/s with PC133. On this

motherboard, DRAM speed can be set independent from the CPU front side bus

speed. Depending on the DRAM clock speed setting in the BIOS setup.

Memory Configuration Table

Number of Memory Modules DIMM 1 DIMM 2 DIMM 3

RAM Type SDRAM

Memory Module Size (MB) 32/64/128/256/512 MB/1 GB

Step 4. On Board Audio Codec Enable/Disable (SW1)

SW1 Pin 1 Pin 2

Enable On On

Disable Off Off

SY-P4IS2 Quick Start Guide

Hardware

Installation

Step 5. CNR MR Card-CODEC OPTION (JP4)

CNR MR Card-CODEC

OPTION Primary Secondary

JP4 Setting Open JP4 Short JP4

CMOS Clear (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear

the CMOS memory.

1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper

can be easily identified by its white colored cap.

2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOS Clearing

Clear CMOS Data Retain CMOS Data

JP5 Setting Short pin 2-3 for

at least 5 seconds to

clear the CMOS

Short pin 1-

2 to

retain new

settings

Note: You must unplug the ATX power cable from the ATX po

werconnectorwhen

performing the CMOS Clear operation.

1 2 3

1 2

Andere Handbücher für SY-P4IS2

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-6BA+ Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4S DRAGON Ultra Bedienungsanleitung

SOYO

SOYO SY-P4RS350 Bedienungsanleitung

SOYO

SOYO SY-7VCA-E Bedienungsanleitung

SOYO

SOYO SY-P4VSA Bedienungsanleitung

SOYO

SOYO SY-7IWM/L V1.0 Bedienungsanleitung

SOYO

SOYO SY-K7V DRAGON Plus Bedienungsanleitung

SOYO

SOYO SY-7VEM Bedienungsanleitung

SOYO

SOYO SY-6IZM/3 Bedienungsanleitung

SOYO

SOYO SC-5EH5 Gebrauchs- und Pflegehandbuch

SOYO

SOYO 6BE+ Bedienungsanleitung

SOYO

SOYO SY-7VCA Bedienungsanleitung

SOYO

SOYO SY-K7VTA PRO Bedienungsanleitung

SOYO

SOYO SY-6BA+ Bedienungsanleitung

SOYO

SOYO Motherboard SY-6BA+ IV Bedienungsanleitung

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO 82440 FX Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IEM Bedienungsanleitung

SOYO

SOYO TechAID Bedienungsanleitung

SOYO

SOYO SY-7IWB Bedienungsanleitung

SOYO

SOYO SY-7IWB V1.0 Bedienungsanleitung

SOYO

SOYO SY-7ISA+ Bedienungsanleitung

SOYO

SOYO SY-K7VTA-B Bedienungsanleitung

SOYO

SOYO Motherboard SY-6ZB Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung