Speco HHDI04D1B Bedienungsanleitung

Please read this manual thoroughly before operation and keep

it handy for future reference.

HHDI04D1B

HHDI04D1W

HDcctv 720/1080P Selectable

INDOOR DOME

Wall/Ceiling Mount

DC auto iris 2.8~12mm

Dual Voltage (12VDC / 24VAC)

HD-SDI, CVBS & Second video out

DO NOT use power sources other than that specified.______

The lighting flash with an arrowhead symbol, within an equilateral triangle is

Intended to alert the user to the presence of un-insulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons____________________________________

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (serving) instructions

in the literature accompanying the appliance__________________

INFORMATION -This equipment has been tested and found to company with

limits for a class a digital device Pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful

Interference When the equipments operated in a commercial environment.

This equipment generates, uses, and Can Radiate radio frequency energy and

if not installed and used in accordance with the instruction manual, may Cause

Harmful interference to radio communications. Operation of this equipment in a

r e s i d e n t i a l a r e a is l i k e l y to c a u s e h a r m f u l i n t e r f er e n c e in w h i c h

Case the user will be required to correct the interference at his own expense.

WARNING –Change or modification not expressly approved by the manufacturer could void

the user’s authority to operate the equipment__________________________________

CAUTION : To prevent electric shock and risk of fire hazards.

This installation should be made by a qualified service person and should conform to all local codes.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (O R B ACK).

NO USER SERVICEABLE PARTS INSIDE

R E F E R S E R V I C I N G TO Q U A L I F I E D

SERVICE PERSONNEL._______________

CAUTION

WARNING & CAUTION

PACKAGE CONTENTS & INSTALLATION

Please make sure that the following items are included

in the Package:

-2 Mounting Screws

-1 Video Test Connector

-1 Power Cable

DFM

Compatible Accessories

FEATURES

1. MEGAPIXEL HIGH RESOLUTION

1/3” 2.1Megapixel Progressive CMOS sensor provides Full HD 1080p

video resolution.

2. SENS-UP

Digitally manipulates the exposure level of the image to produce bright

images in the darkest of scenarios.

3. DNR (Digital Noise Reduction)

The high performance DSP Technology reduces the gain noise in

digital image processing, producing clear sharp images in low light

condition.

4. PIP (Picture in Picture)

When D-Zoom is activated, motion detected picture is shown in

inset window.

5. DPC (Defect Pixel Correction)

It performs the detection and correction of defective pixels in

a camera Image sensor array.

6. DAY / NIGHT

Switch to appropriate mode (Color or B/W) automatically.

7 . Miscellaneous

The camera conveys various features including Motion detection,

Privacy Masking, DeFog, BLC, etc.

OSD MENU TREE

EXIT

LENS Mode

●DC

●Indoor ●Outdoor

EXPOSURE

●SHUTTER ●AGC ●SENS-UP ●BRIGHTNESS

●ACCE ●DEFOG ●BACKLIGHT ●RETURN

WHITE BAL.

●ATW ●AWC->SET ●INDOOR ●OUTDOOR ●MANUAL

●2DNR ●3DNR ●LEVEL (3D DNR) ●SMART NR

●RETURN

DAY & NIGHT

●AUTO ●COLOR ●BW ●EXT

SPECIAL

●CAM TITLE ●●D-EFFECT ●MOTION ●PRIVACY

●LANGUAGE ●DEFECT ●RS-485 ●VERSION

●RETURN

RESET

●FACTORY ●RETURN

ADJUST

●SHARPNESS ●MONITOR ●OSD ●LSC ●NTSC/PAL

●720 / 1080 ●RETURN

OSD MENU DETAILS

1) LENS <DC >

2) EXPOSURE

<SHUTTER / AGC / SENS-UP / BRIGHTNESS /ACCE/ DEFOG /

BACKLIGHT / RETURN>

SHUTTER : Adjust shutter settings : Auto / A. FLK / Manual

- A. FLK mode reduces on-screen flickering.

- Electronic Shutter Control (AUTO) adjusts brightness level on

screen.

- Manual mode allows you to adjust the shutter speed from

1/30 ~1/50,000 and also x2 ~ x30.

AGC (Auto Gain Control) : High / Middle / Low

- Controls Gain Noise to improve image quality.

- Set AGC Mode to High to increase the Gain.

SENS-UP : Off / Auto(x2 ~ x30)

- Automatically detects ambient light level and maintains a clear

picture in low light conditions.

BRIGHTNESS : Adjust Brightness of the lens (1~100 Steps)

ACCE : Off / Low / Middle / High

- Adaptive color contrast enhancement

DEFOG : Off / Low / Middle / High

- Turn Defog ON to compensate for external conditions.

BACKLIGHT : Off / BLC / HSBLC

- BLC : Will compensate for extremely bright background conditions.

- HSBLC : To mask a strong light at a designated area.

Return

OSD MENU DETAILS

3) WHITE BAL.

ATW : Auto Tracking White Balance.

- Use this mode when the color temp. is between 1,800~10,000K

AWC->SET :

- To find the optimal setting for current luminance environment in this

mode. To manually set, point the camera towards a sheet of white paper

and press the Joystick.

INDOOR : Loads indoor camera settings.

OUTDOOR : Loads outdoor camera settings.

MANUAL

- To fine-tune White Balance manually. Set White balance first by using

ATW or AWC mode before Manual mode. After that , if there is still a white

balance issue, switch to manual mode to fine-tune. Manual mode allows

you to increase or decrease the red or blue factor.

4) DAY / NIGHT <AUTO / COLOR / BW / EXT>

AUTO : Automatic D/N switching according to ambient illumination.

Delay / D-N / N-D / Return Modes are provided.

COLOR : Sets the camera to display color video

B/W : Sets the camera to display B/W video

EXT : Auto D/N switching by using external signals (IR version only).

5) NR <2DNR / 3DNR / LEVEL / SMART NR>

- To reduce the background noise in a low luminance environment with

2D + 3D filtering system.

2DNR : Reduce Noise Level in static objects.

3DNR : Reduce Noise Level in non-static objects.

LEVEL : Control 3D DNR Level.

Smart NR : Reduce “Ghost Effect” caused by moving objects.

OSD MENU DETAILS

6) SPECIAL

6-1) CAM TITLE : To program and display a camera title on the monitor.

6-2) D-EFFECT :

- Freeze : Freezes the display image.

- Mirror : Changes the video image via a Vertical flip or mirror.

- D-Zoom : Digital Zoom In / Out up to X64.

PIP : When D-Zoom is activated, the original picture will be

shown in inset window.

PAN/TILT : D-Zoom is activated your desired Pan /Tilt location of PIP

- Neg.Image : Image reversal ON/OFF

6-3) MOTION :

- A signal is generated by the camera whenever motion is

detected. You can define 3 areas and control its sensitivity.

6-4) PRIVACY :

To disable video in a selected area. 8 areas selectable.

6-6) LANGUAGE :

< ENG/ JPN/ CHN1/ CHN2>

6-7) DEFECT :

Activate this setting when “White Spots or Dead Pixels” are detected.

- Live DPC : It corrects “Dead Pixel” while the camera is activated.

- Level : Set the desired level of Live DPC

- Static DPC : It corrects “ Dead Pixel” when the camera is using Sens-

Up.

- Sens-Up : Set the designated Sens-Up value for Static DPC.

6-6) RS-485 : Pelco D is supported. (Optional)

7) ADJUST

7-1) SHARPNESS : Level / Resolution / Return

* Activate “Resolution” mode to get better resolution.

7-2) MONITOR : CRT / LCD modes are provided.

7-3) OSD : Change OSD Text colors.

7-4) LSC : Lens Shading Correction.

7-5) NTSC / PAL : Select your TV system.

7-6) 720 / 1080 : Select your desired video size and resolution.

7-7) Return

8) RESET

Item HHDI04D1B / HHDI04D1W

Image Sensor 1/3” Progressive CMOS Sensor

Total Pixels 2010(H) x 1180(V) Approx. 2.22Megapixels

Effective Pixels 1944(H) x 1092(V) Approx. 2.12Megapixels

Video Output 1920(H) X 1080(V) 30P, 1280(H) X 720(V) 60P

Video Output Format HD-SDI Output (1.5G/s, SMPTE 292M),

Analogue second video output, CVBS out simultaneously

Min. Illumination 0.1Lux (F.1.2, 50IRE, AGC Max.)

0.01Lux (Sens-Up : Auto:x30)

S/N (Y signal) 52dB (AGC Off)

AGC LOW / MIDDLE / HIGH SELECTABLE

SHUTTER OFF / A.FLK / 1/30~1/50000 / X30 ~ X2 / AUTO

SENS-UP OFF / AUTO (X2~X30)

ACCE OFF / LOW / MIDDLE / HIGHT SELECTABLE

WHITE BALANCE ATW / AWC-SET / INDOOR / OUTDOOR / MANUAL

DAY / NIGHT AUTO / COLOR / BW / EXT SELECTABLE

NR(NOISE REDUTION) 2DNR / 3DNR / SMART NR SELECTABLE

MOTION DET. ON | OFF (3 Programmable Zone)

PRIVACY MASKING ON | OFF (8 Programmable Zone)

LENS SHADING

CORRECT. ON / OFF SELECTABLE

Power Source 12VDC & 24VAC ( Dual Voltage )

Power Consumption 250mA (DC) / 3.6W (AC)

Synchronization Internal

Lens Type DC Auto Iris Megapixel 2.8~12mm

Operational Temperature -29℃~ +50℃( - 20℉~122℉)

Operational Humidity 30% ~90% RH

Dimension 5.51”(Dia) X 3.94”(H)

Weight 1.0Ibs

SPECIFICATIONS

DIMENSIONS

* SIDE VIEW

* TOP VIEW

Unit : mm

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Speco Sicherheitskamera Handbücher

Speco

Speco Intensifier O2iB68 Bedienungsanleitung

Speco

Speco WIDE DYNAMIC RANGE CVC624WDR Bedienungsanleitung

Speco

Speco O5B2M Bedienungsanleitung

Speco

Speco VIP2B1M Bedienungsanleitung

Speco

Speco O4FB8M Bedienungsanleitung

Speco

Speco CVC-340LC Bedienungsanleitung

Speco

Speco CVC-345BC Bedienungsanleitung

Speco

Speco OIPC22T7G Bedienungsanleitung

Speco

Speco WDR705H Bedienungsanleitung

Speco

Speco VIP2C1P Bedienungsanleitung

Speco

Speco CVC-105CM Bedienungsanleitung

Speco

Speco TC-23 Bedienungsanleitung

Speco

Speco ProVideo CVC-646HR Bedienungsanleitung

Speco

Speco Intensifier O2i695 Bedienungsanleitung

Speco

Speco INTENSIFIER HTINTB8 Bedienungsanleitung

Speco

Speco HT-7246IHR Bedienungsanleitung

Speco

Speco HTD8SCSB Bedienungsanleitung

Speco

Speco CVC-622PH Bedienungsanleitung

Speco

Speco O2iBD4 Bedienungsanleitung

Speco

Speco HT-7248FFI Bedienungsanleitung

Speco

Speco O2VD2 Bedienungsanleitung

Speco

Speco ProVideo CVC-6705 Bedienungsanleitung

Speco

Speco O4P4X2 Bedienungsanleitung

Speco

Speco VLB5 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung