Speco O4DT5 Bedienungsanleitung

Inhaltsverzeichnis

Andere Speco Sicherheitskamera Handbücher

Speco

Speco O4VT1 Bedienungsanleitung

Speco

Speco CVC-50BC Bedienungsanleitung

Speco

Speco O3FDP9 Bedienungsanleitung

Speco

Speco VL-6444DC Bedienungsanleitung

Speco

Speco CVC-648IRHQ Bedienungsanleitung

Speco

Speco O2VLB8 Bedienungsanleitung

Speco

Speco O4VLB3 Bedienungsanleitung

Speco

Speco O8T8M Bedienungsanleitung

Speco

Speco O4iT2W Bedienungsanleitung

Speco

Speco VIP2D2M Bedienungsanleitung

Speco

Speco O8B8M Bedienungsanleitung

Speco

Speco HT5943T Bedienungsanleitung

Speco

Speco VLEDB2HW Bedienungsanleitung

Speco

Speco VL-66 Bedienungsanleitung

Speco

Speco HT-7816DNV Bedienungsanleitung

Speco

Speco RC-650 Betriebsanleitung

Speco

Speco ProVideo CVC-980IR Bedienungsanleitung

Speco

Speco CVC-550EX Bedienungsanleitung

Speco

Speco V5B1 Bedienungsanleitung

Speco

Speco IP-INTB1 Bedienungsanleitung

Speco

Speco CVC62iLTB Bedienungsanleitung

Speco

Speco O8FB1M Bedienungsanleitung

Speco

Speco H8D7M Bedienungsanleitung

Speco

Speco CVC-68245 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Quick Start Guide

O4DT5

1Warning and Caution

■ If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to disassemble

the camera yourself. Any unauthorized changes or modifications

could void the warranty.

■ Do not allow water or liquid intrusion into the camera.

■ All installation and operation here should conform to local

electrical safety codes. Make sure the device is firmly installed

on the wall or ceiling.

■ Do not use camera beyond specified voltage range.

■ Do not drop the camera or subject it to physical shock.

■ Avoid touching the camera lens.

■ If cleaning is necessary, please use cleaning cloth to wipe it

gently.

■ Do not aim the camera at the sun or extremely bright light

sources.

■ Do not place the camera in extremely hot or cold environments

and dusty and damp locations. Do not expose it to highly

electromagnetic radiation.

■ Do not block any ventilations.

Package

2

Overview

3

Junction box

Overview

3

Ethernet connector

CVBS connector

MIC in connector

DC power connector

1

2

3

4

Camera Quick start guide

CD Plastic plug ×4

Drill template

Rubber plug Screwdriver

4 tapping screws PA 4×35

1

2

3

4

* 1 It is recommended to install the security cap for outdoor installations.

* 2 DC 12V power supply is not required if a PoE switch or injector is used to power

the camera.

► Connecting Network Cable

① Loosen the nut from the main element.

② Run the network cable (without RJ 45 connector) through both

elements. Then crimp the cable with RJ 45 connector.

③ Connect the cable to the hermetic connector. Then tighten the nut

and the main cover.

DC12V

2

13

Security Cap

Installation

4

* Before you start, please make sure that the wall or ceiling is strong enough

to withstand three times the weight of the camera and the junction box.

① Open the mounting base and the upper cover of the junction box.

② Install junction box onto the wall by using the screws provided.

Mounting base

Upper cover

③ Mount the rubber plug to the gap of the mounting base of the

camera and then fasten the camera onto the junction box.

④ Route the cables through the cable hole and connect the cables.

Then reinstall the upper cover onto the junction box.

Rubber plug

⑤ Adjust the camera to obtain an optimum angle by loosening the

lock screws. Before adjustment, preview the image of the camera on a

monitor. After that, tighten the lock screws to finish the installation.

Web Operation and Login

5

● Operation

IP Scanner can search for the device on the local network.

① Make sure that the camera and the PC are connected to the same

local network. The camera is set to DHCP by default.

② Install IP Scanner from the CD and run it after installation.

Lock screw

③ In the device list, you can view the IP address, model number, and

MAC address of each device. Select the applicable device and double

click to open up the web viewer. You can also manually enter the IP

address in the address bar of the web browser.

The login interface is shown above. Default user name is admin and

password is 1234. After logging in, follow directions to install

applicable plugins.

O4DT5