ST EVAL-L9963-MCU Montage- und Bedienungsanleitung

Introduction

This document is intended as quick guide to help the user in the startup phase of EVAL-L9963-MCU combining and

summarizing the information contained in EVAL-L9963-MCU and STSW-L9963 user manuals.

L9963 14 Cells BMC IC Evaluation Board Quick Guide

AN5560

Application note

AN5560 - Rev 2 - November 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1What you need

• EVAL-L9963-MCU

• USB cable

• Power supply (at least 3 output 0 – 30 V (if possible 60V):

– 1 output to power L9963 (0:60 V)

– 1 output to simulate Cells common mode voltage (0:60 V)

– 1 output to simulate Cell voltage (0:5 V)

• L9963 evaluation GUI STSW-L9963

• NI Labview-runtime 2014

• NI VISA-RUNTIME

Note: Before using the UART/USB bridge FT2232H, the Virtual Com Port (VCP D2XX) driver needs to be installed. It

can be downloaded by the FTDI Chip website.

Figure 1. EVAL-L9963-MCU board

Figure 2. EVAL-L9963-NDS board

AN5560

What you need

AN5560 - Rev 2 page 2/25

2Board description

Figure 3. Main components and connectors

Note: 1. EVAL-L9963-MCU can be considered the only stage or the first stage of several stages. The port is the

isolated vertical interface to the next stage (EVAL-L9963-NDS);

2. A second L9963T (optional) may be needed to create a direct loop with the last stage (dual ring access);

3. MCU can be supplied either by USB or by L9001 (PMIC);

4. On board MCU can be bypassed in case a different MCU is needed for the user trials; these pins allow

an SPI connection with an external MCU (upon a specific board configuration). Anyway a specific board

derivative of EVAL-L9963-MCU has been designed for this purpose (same form factor/layout with MCU not

mounted: EVAL- L9963).

AN5560

Board description

AN5560 - Rev 2 page 3/25

3Block diagram

Figure 4. EVAL-L9963-MCU block diagram

AN5560

Block diagram

AN5560 - Rev 2 page 4/25

4Microcontroller Power supply

Figure 5. Microcontroller Power supply

AN5560

Microcontroller Power supply

AN5560 - Rev 2 page 5/25

5L9963 external connection and power supply

Figure 6. L9963 external connection and power supply

AN5560

L9963 external connection and power supply

AN5560 - Rev 2 page 6/25

6Transceiver settings

Figure 7. Transceiver settings

AN5560

Transceiver settings

AN5560 - Rev 2 page 7/25

7Possible connection for battery simulation

Figure 8. Battery simulation 1

Figure 9. Battery simulation 2

AN5560

Possible connection for battery simulation

AN5560 - Rev 2 page 8/25

8Preliminary action to open the GUI

Install the following SW on your PC:

• NI Labview-runtime 2014

• NI VISA-RUNTIME

• FTDI driver

– Before using the UART/USB bridge FT2232H, the Virtual Com Port (VCP) driver needs to be installed.

It can be downloaded by the FTDI Chip website.

When all is installed reboot your PC and open STSW-L9963.exe

AN5560

Preliminary action to open the GUI

AN5560 - Rev 2 page 9/25

9USB to PC connection

Figure 10. USB to PC connection

AN5560

USB to PC connection

AN5560 - Rev 2 page 10/25

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STEVAL-IHM022V1 Bedienungsanleitung

ST AN3959 Montage- und Bedienungsanleitung

ST STM32F103RET6 Bedienungsanleitung

ST STM3210E-EVAL Bedienungsanleitung

ST STM32L1 Series Montage- und Bedienungsanleitung

ST STEVAL-ILL009V1 Montage- und Bedienungsanleitung

ST STM3221G-EVAL Bedienungsanleitung

ST STM32H7B3I-EVAL Bedienungsanleitung

ST 32L100CDISCOVERY Bedienungsanleitung

ST STEVAL-ISB042V1 Bedienungsanleitung

ST SPC5-UDESTK Bedienungsanleitung

ST FP-SNS-6LPNODE1 Bedienungsanleitung

ST STM8L1526-EVAL Bedienungsanleitung

ST STEVAL-PTOOL2V1 Bedienungsanleitung

ST STEVAL-SMARTAG2 Bedienungsanleitung

ST STM32100B-EVAL Bedienungsanleitung

ST SPC572LADPT100S Bedienungsanleitung

ST STEVAL-IHM011V1 Bedienungsanleitung

ST EVALSP1310CPU Bedienungsanleitung

ST STM32G070RBT6 Bedienungsanleitung

ST AEKD-AICAR1 Bedienungsanleitung

ST SPC58XXADPT64S Bedienungsanleitung

ST STM32303E-EVAL Bedienungsanleitung

ST EVAL-L99DZ200 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung