ST SPC58XXADPT64S Bedienungsanleitung

Introduction

The SPC58XXADPT64S rev. B evaluation board supports STMicroelectronics SPC582BxxE1, SPC584BxxE1 and

SPC58xCxxE1 microcontrollers in eTQFP64 package.

Figure 1. SPC58XXADPT64S rev. B

SPC58XXADPT64S rev. B evaluation board

UM2790

User manual

UM2790 - Rev 1 - February 2021

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58XXADPT64S rev. B "mini module" is an evaluation board supporting STMicroelectronics

SPC582BxxE1, SPC584BxxE1 and SPC58xCxxE1 microcontrollers in eTQFP64 package with exposed pad

down.

The SPC58XXADPT64S rev. B "mini module" is designed to be connected onto the SPC58xxMB motherboard,

offering a mechanism for easy customer evaluation of the SPC582BxxE1, SPC584BxxE1 and SPC58xCxxE1

microcontrollers and to facilitate hardware and software development.

High density connectors provide the interface between the EVB and MCU daughter cards and help the

developers evaluate all device peripherals.

This user manual provides information on using SPC58XXADPT64S rev. B "mini module" board and its hardware

features.

The "mini module" may be used as a stand-alone unit granting access to the CPU, but no access to the I/O pins

as any motherboard peripherals.

The SPC58XXADPT64S rev. B "mini module" is designed to be easily configurable and to be used for

SPC582BxxE1, SPC584BxxE1 and SPC58xCxxE1.

The "mini module" is configured by default for SPC582BxxE1 and easily supports SPC584BxxE1 and

SPC58xCxxE1 by simply changing the following through-hole jumper JR19.

Figure 2. Overview of SPC58XXADPT64S rev. B "mini module" - top

UM2790

Overview

UM2790 - Rev 1 page 2/24

Figure 3. Overview of SPC58XXADPT64S rev. B "mini module" - bottom

1.1 Package contents

An SPC58XXADPT64S rev. B adapter package includes the following item:

• SPC58XXADPT64S rev. B "mini module"

1.2 Supported devices

The SPC58XXADPT64S rev. B "mini module" supports the following STMicroelectronics family of microcontrollers

in eTQFP64 package:

• SPC582BxxE1

• SPC584BxxE1

• SPC58xCxxE1

UM2790

Package contents

UM2790 - Rev 1 page 3/24

2License agreement

The packaging of this evaluation board was sealed with a seal stating, " by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at https://www.st.com/resource/en/evaluation_board_terms_of_use/evaluationproductlicenseagreement.pdf ".

Upon breaking the seal, you and STMicroelectronics entered into the evaluation board license agreement, a

copy of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use

with other products and is not suitable for any safety or other commercial or consumer application. This

evaluation board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or

implied, including the implied warranties of merchantability and fitness for a particular purpose.

UM2790

License agreement

UM2790 - Rev 1 page 4/24

3Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2790

Handling precautions

UM2790 - Rev 1 page 5/24

4Hardware description

4.1 Hardware features

The SPC58XXADPT64S rev. B "mini module" board has the following features:

• Connector for external power supplies input (5.0 V, 3.3 V, 1.25 V) used in stand-alone mode

• Reset button with driver and led indicator

• Socket for device in eTQFP64 package

• Debug ports:

– 14-pin header connector for JTAG port

– 10-pin header connector for SIPI interface

• 40 Mhz crystal main oscillator with jumpers to optionally disconnect it

• 8 Mhz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector to optionally disconnect it

• 2 X SAMTEC QSH series, 240 way connector to connect "mini module" to motherboard

4.2 Hardware dimension and PCB component view

The "mini module" has the following dimensions:

• PCB area: 127 mm x 114.3 mm

• Top components height: 16 mm max

• Bottom components height: 3.5 mm max

• PCB thickness: 1.6 mm

UM2790

Hardware description

UM2790 - Rev 1 page 6/24

5Power and system configuration

5.1 Power supplies

When the "mini module" is plugged onto the motherboard, power is supplied directly by the motherboard. In this

setup, the external power supply input available on the "mini module" should NOT be used.

When the SPC58XXADPT64S rev.B "mini module" is used as a stand-alone board, external power supplies must

be used (5.0 V, 3.3 V, 1.25 V).

The following jumpers are used to configure the power supply:

Table 1. Supply related jumpers

Jumper Description Default Position

J3 Jumper to enable the use of supply

3.3V_SR Closed Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D3

J4 Jumper to enable the use of supply

5.0V_SR Closed Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D3

J5 Jumper to enable the use of supply

1.25V_SR Closed Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - A3

VDD_HV_ADR_S voltage configuration,

select from 5.0V_LR (linear), 3.3V_SR

(switching) or 5.0V_SR (switching)

1-2 (5.0V_LR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D2

VDD_HV_ADV_S voltage configuration,

select from 5.0V_LR (linear), 3.3V_SR

(switching) or 5.0V_SR (switching)

1-2 (5.0V_LR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D2

J8 VDD_HV_IO_MAIN voltage configuration,

select from 5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D3

VDD_HV_IO_FLEX voltage configuration,

select from 5.0V_SR or 3.3V_SR (for

Chorus 4M with JR19 closed 2-3)

1-2 (5.0V_SR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - D3

J16 VDD_LV voltage configuration, select from

1.25V_SR or from Ballast Circuit 1-2 (1.25V_SR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - B3

J18 Ballast supply voltage configuration, select

from VDD_HV_IO_MAIN or from 5.0V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - A3

JP1

VDD_HV_FLA voltage configuration,

connect or disconnect VDD_HV_FLA from

VDD_HV_IO_MAIN

Closed Figure 5. SPC58XXADPT64S rev. B "mini module" -

bottom - C3

UM2790

Power and system configuration

UM2790 - Rev 1 page 7/24

5.2 Microcontrollers configuration

The SPC58XXADPT64S rev. B "mini module" is designed to be easily configurable and be used for

SPC582BxxE1, SPC584BxxE1 and SPC58xCxxE1.

The "mini module" is configured by default for SPC582BxxE1 and easily supports SPC584BxxE1 and

SPC58xCxxE1 by simply changing the following through-hole jumper JR19.

Table 2. Microcontroller configuration related jumpers

Jumper Description Default Position

JR19

Device pin 62 port configuration / function

configuration:

• 1-2 - PC12 for SPC582BxxE1

• 2-3 - VDD_HV_IO_FLEX for

SPC584BxxE1 and SPC58xCxxE1

Closed 1-2

PC12 for

SPC582BxxE1

Figure 4. SPC58XXADPT64S rev. B "mini

module" - top - B3

5.3 Port configuration

The following jumpers need to configure the ports:

Table 3. Ports related jumpers

Jumper Description Default Position

JP13 TESTMODE settings Close (10 KΩ pull-

down)

Figure 4. SPC58XXADPT64S rev. B "mini

module" - top - A2

JR14

Device pin 6 port configuration / function

configuration:

• 1-2 (PC1)

• 2-3 (ESR0)

Open Figure 4. SPC58XXADPT64S rev. B "mini

module" - top - C3

J29

Device pin 56 port configuration /

function configuration:

• 1-2 (PH4) SPC582BxxE1

• 2-3 (BCTRL) SPC584BxxE1,

SPC58xCxxE

1-2 (PH4)

SPC582BxxE1

Figure 4. SPC58XXADPT64S rev. B "mini

module" - top - A3

5.4 Debug interface configuration

The following jumpers need to configure the ports:

Table 4. Debug interface configuration related jumpers

Jumper Description Default Position

J13

RSTIN connection

• open (disconnect PORST)

• closed (connect PORST)

Closed (connect

PORST)

Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - B2

JP2

JTAG/LFAST LVDS pin 9 configuration

• open (disconnect ESR0)

• closed (connect ESR0)

Open (disconnect

ESR0)

Figure 4. SPC58XXADPT64S rev. B "mini module" -

top - A3

UM2790

Microcontrollers configuration

UM2790 - Rev 1 page 8/24

5.5 System clock configuration

The "mini module" supports the usage of the crystal clock sources as well as the external clock source:

Table 5. Clock configuration jumpers

Jumper Description Default Position

J15 40 MHz crystal clock source enable

for pin EXTAL 1-2 (XT1 pin2) Figure 4. SPC58XXADPT64S rev. B "mini module" - top -

J17 40 MHz crystal clock source enable

for pin XTAL 1-2 (XT1 pin1) Figure 4. SPC58XXADPT64S rev. B "mini module" - top -

J19 Enable 8 MHz oscillator power

supply Open Figure 4. SPC58XXADPT64S rev. B "mini module" - top -

J21 External clock source from 8 MHz

oscillator or SMA connector

1-2

(8 MHz oscillator)

Figure 4. SPC58XXADPT64S rev. B "mini module" - top -

UM2790

System clock configuration

UM2790 - Rev 1 page 9/24

5.6 Reset circuit

The "mini module" supports different ways to reset the microcontroller.

To use and perform the reset driving there are different jumpers and switches:

Table 6. Reset configuration jumpers

Jumper Description Default Position

SW1 Reset push button Open Figure 4. SPC58XXADPT64S rev. B "mini module" - top - D1

J22

Connect the external reset to the reset

driver for

ESR0 and PORST pins

Close Figure 4. SPC58XXADPT64S rev. B "mini module" - top - D1

J20 Connect the external reset to ESR0 pin Close Figure 4. SPC58XXADPT64S rev. B "mini module" - top - D1

J25 Connect the external reset to PORST pin Close Figure 4. SPC58XXADPT64S rev. B "mini module" - top - D2

5.7 Test points

The "mini module" has several test points. Below all test points description:

Table 7. Test points

Test point Description Position

GT1 GND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A2

GT2 GND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - C4

GT3 GND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - C2

GT4 GND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A1

GT5 GND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - D1

GT6 AGND test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - B2

GT7 VSS_OSC test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - B3

TP1 TCK test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A2

TP2 TMS/Txp test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A3

TP3 TDI/Txn test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A3

TP4 TDO/Rxp test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A3

TP5 JCOMP/Rxn test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A3

TP6 J23A, QSH connector, pin10 (PA5) test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A4

TP7 J23A, QSH connector, pin11 (PA6) test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A4

TP8 J23A, QSH connector, pin12 (PA7) test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - B4

TP9 J23A, QSH connector, pin13 (PA8) test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - B4

TP10 J23A, QSH connector, pin14 (PA9) test point Figure 4. SPC58XXADPT64S rev. B "mini module" - top - B4

5.8 Connectors

The "mini module" has the following connectors:

Table 8. Connectors

Connectors Description Position

J14 14-pin header connector for JTAG interface Figure 4. SPC58XXADPT64S rev. B "mini module" - top - A3

UM2790

Reset circuit

UM2790 - Rev 1 page 10/24

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STA304 Bedienungsanleitung

ST VIPower VIPer22A-E Montage- und Bedienungsanleitung

ST EVAL-L9958 Bedienungsanleitung

ST STEVAL-ISB044V1 Bedienungsanleitung

ST EVALSTPM34 Bedienungsanleitung

ST STM32L476ZG Bedienungsanleitung

ST STM3210B-EVAL Bedienungsanleitung

ST STM32L152-EVAL Bedienungsanleitung

ST STEVAL-OET001V1 Bedienungsanleitung

ST X-NUCLEO-IDW01M1 Bedienungsanleitung

ST STEVAL-PCC008V1 Bedienungsanleitung

ST STLINK-V3SET Bedienungsanleitung

ST STM32CubeF4 Bedienungsanleitung

ST STM32G0C1E-EV Bedienungsanleitung

ST STEVAL-ISB68RX Bedienungsanleitung

ST STEVAL-SPIN3202 Bedienungsanleitung

ST L9678-S-EVB Bedienungsanleitung

ST STEVAL-MKI019V1 Bedienungsanleitung

ST X-NUCLEO-IDB04A1 Bedienungsanleitung

ST EVALSP320SCPU Bedienungsanleitung

ST STM32G070RBT6 Bedienungsanleitung

ST EVAL-L99H02XP Bedienungsanleitung

ST SPC564A-DISP Montage- und Bedienungsanleitung

ST SPC572L-DISP Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung