ST SPC58NHADPT386S Bedienungsanleitung

Introduction

The SPC58NHADPT386S Rev.B evaluation board supports STMicroelectronics SPC58NH92 microcontroller in FPBGA

19x19x1.8 386.

Figure 1. SR6-EVB000 Rev. B

Note: picture is not contractual.

SPC58NHADPT386S Rev.B evaluation board

UM2640

User manual

UM2640 - Rev 1 - July 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58NHADPT386S mini module is an evaluation board supporting STMicroelectronics SPC58NH92

microcontroller in FPBGA 19x19x1.8 386 package (FPBGA 19x19x1.8 386 3R22+10+2R14+52 PITCH 0.8 BALL

0.55). This mini module is designed to be connected onto the SPC58xxMB motherboard, offering a mechanism

for easy customer evaluation of the supported devices, and to facilitate hardware and software development. The

mini module may be used as a stand-alone unit allowing access to the CPU, limited access to the I/O pins as well

as any motherboard peripherals.

1.1 Package contents

An SPC58NHADPT386S Rev. B adapter package includes the following items:

• SPC58NHADPT386S Rev. B mini module

The MCU is not included, it must be purchased separately. Please contact your sales representative for more

details.

1.2 Supported devices

The SPC58NHADPT386S Rev. B mini module supports the following STMicroelectronics family of

microcontrollers in FBGA 19x19x1.8 386:

• SPC58NH92C5xx

UM2640

Overview

UM2640 - Rev 1 page 2/37

2License agreement

The packaging of this evaluation board was sealed with a seal stating, “by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at http://www.st.com/ebla”. Upon breaking the seal, you and STMicroelectronics entered into the evaluation board

license agreement, a copy of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use with

other products and is not suitable for any safety or other commercial or consumer application. This evaluation

board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or implied,

including the implied warranties of merchantability and fitness for a particular purpose.

UM2640

License agreement

UM2640 - Rev 1 page 3/37

3Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2640

Handling precautions

UM2640 - Rev 1 page 4/37

4Hardware description

4.1 Hardware features

The SPC58NHADPT386S Rev. B mini module board has the following features:

• Connector for external power supplies input (5 V) used in stand-alone mode

• Reset button with driver and led indicator

• Socket for device in FPBGA302 package

• Debug interfaces:

– 14-pin header connector for JTAG interface

– 10-pin header connector for JTAG/LFAST LVDS interface

– 10-pin header connector for SIPI interface

– 38-pin Nexus parallel debug connector

• 40 MHz crystal main oscillator with jumpers to optionally disconnect it

• 8 MHz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector with jumper to optionally disconnect it

• 2 X Samtec QSH series, 240-way connector to connect mini module to Motherboard

• 1 Gb/s Ethernet port

• HyperRAM and HyperFlash connected to HyperBUS interface

• Embedded eMMC device

• SD/MMC Card Reader

• 3 x Header connectors 5x2 with 0.1” (CIS, ISU and AI connectors)

UM2640

Hardware description

UM2640 - Rev 1 page 5/37

4.2 Hardware dimension

The mini module has the following dimension:

• PCB area: 157 mm x 114.3 mm

• Top components height: 19 mm max

• Bottom components height: 3.5 mm max

Figure 2. SPC58NHADPT386S Rev. B top component view

UM2640

Hardware dimension

UM2640 - Rev 1 page 6/37

5Power and system configuration

5.1 Power supplies

The mini module can be powered by providing voltages or supplied externally by the 2-Way PCB Screw

Connector (CN1) or supplied by the motherboard.

When the mini-module is connected to the mother board (MB), 3V3 and 5V0 are supplied by MB connector

selecting the associated jumpers. In this setup, the external power supply input available on the mini module

should NOT be used.

When the SPC58NHADPT386S Rev. B mini module is used as a stand-alone board, 5V0 voltages must be

supplied externally, 3V3 and 1V2 voltages will be generated internally by specific circuit on the mini-module.

The following jumpers are used to configure the power supply (common for all supported devices):

Table 1. Power configuration jumpers

Jumper Description Default Position

3.3 V source for J3 pin3 (VDD_HV_ADR_S

and VDD_HV_ADV) voltage configuration:

• 1-2 3.3V_ADC

• 2-3 3.3V_SR

1-2

(3.3V_ADC)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

3.3V_SR Switching voltage configuration:

• 1-2 3.3V (3V3 generated by mini-

module)

• 2-3 MB_3.3V_SR (3V3 by Mother

board)

1-2

(3.3V By mini module)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D4

VDD_HV_ADR_S / VDD_HV_ADV voltage

configuration:

• 1-2 5.0V source from J4 pin2

• 2-3 3.3V source from J1 pin2

1-2

(5.0V from J4 pin2)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

5V source for J3 pin1 (VDD_HV_ADR_S and

VDD_HV_ADV) voltage configuration:

• 1-2 5.0V_ADV

• 2-3 5.0V_SR

1-2

(5.0V_ADV)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

5.0V_SR Switching voltage configuration:

• 1-2 5.0V_EXT (5V0 externally voltage)

• 2-3 MB_5.0V_SR (5V0 by Mother

board)

2-3

(5.0V_SR by MB)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

5.0V_ADV configuration:

• 1-2 MB_5.0V_LR (5.0V Linear from

MB)

• 2-3 5.0V_ADC (5.0V filtered)

2-3

(5.0V_ADC)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

VDD_HV_FLA voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

VDD_HV_IO_EMMC voltage enable:

• Closed: Connect 3.3V_SR to

VDD_HV_IO_EMMC pins

Closed

(Connect 3.3V_SR to

VDD_HV_IO_EMMC pins)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D4

1.2V_SR Switching configuration:

• 1-2 MB_1.25V_SR (1.25V from MB)

• 2-3 1.2V (1.2V from Mini module)

2-3

(1.2V from Mini module)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D4

UM2640

Power and system configuration

UM2640 - Rev 1 page 7/37

Jumper Description Default Position

J10

VDD_HV_IO_ETH1 voltage enable:

• Closed: connect 3.3V_SR to

VDD_HV_IO_ETH1 pins

Closed

(Connect 3.3V_SR to

VDD_HV_IO_ETH1 pins)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D4

J11

VDD_HV_IO_ETH0 voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

J12

5.0V_ADC filtered voltage enable:

• Closed: connect the 5.0V_EXT to

5.0V_ADC trough the filter circuit.

Closed

(5.0V_ADC)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

J13

VDD_HV_IO_MAIN voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

J14

VDD_HV_OSC voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - D3

J17

BALLAST CIRCUIT ENABLE

• Closed: enabled

• Open: disable

Closed

(enable)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - B1

J18

Supply for BALLAST circuit configuration

• 1-2 VDD_HV_IO_MAIN

• 2-3 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - B1

J19

VDD_LV voltage configuration:

• 2-1 (BALLAST circuit)

• 2-3 (1.2V_SR)

• 2-4 (SMPS regulator module)

2-3

(1.2V_SR)

Figure 10. Overview of

SPC58NHADPT386S Rev. B mini

module - top - A1

UM2640

Power supplies

UM2640 - Rev 1 page 8/37

5.2 JTAG/LFAST LVDS/ SIPI interface configuration

The following jumpers need to configure the JTAG/LFAST LVDS/SIPI:

Table 2. JTAG/LFAST/SIPI configuration jumpers

Jumper Description Default Position

J20

JTAG/LFAST LVDS pin 7 configuration

• 1-2: EVTI

• 2-3: PK10

1-2

(EVTI)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J21

SIPI pin 3 configuration

• 1-2: RDY

• 2-3: PA14

1-2

(RDY)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J22

JTAG pin 1/ LFAST LVDS pin 6

configuration

• 1-2: TDI

• 2-3: PA8

1-2

(TDI)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J23

JTAG pin 3/ LFAST LVDS pin 4

configuration

• 1-2: TDO

• 2-3: PA9

1-2

(TDO)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J24

JTAG pin 13 configuration

• 1-2: EVTO

• 2-3: PJ3

1-2

(EVTO)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J25

PC1 / ESR0

• 1-2 ESR0

• 2-3 PC1

1-2

(ESR0)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J26

EVTO/ESR0

• 1-2 ESR0

• 2-3 EVTO

1-2

(ESR0)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

J52

PE3 / CLKOUT

• 1-2 CLKOUT

• 2-3 PE3

1-2

(CLKOUT)

Figure 10. Overview of SPC58NHADPT386S Rev. B mini

module - top - A4

UM2640

JTAG/LFAST LVDS/ SIPI interface configuration

UM2640 - Rev 1 page 9/37

5.3 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Table 3. Clock configuration jumpers

Jumper Description Default Position

J30

XTAL32 configuration

• Close: connect pin 2 of 32.768KHz crystal

(Y2) to XTAL32

Open Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - C2

J31

EXTAL32 configuration

• Close: connect pin 1 of 32.768KHz crystal

(Y2) to EXTAL32

Open Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - C2

J32

EXTAL configuration

• 1-2 connect pin 2 of 40MHz crystal (Y1)

to EXTAL

• 2-3 EVB-EXTAL

1-2

(XT1 pin2)

Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - B1

J33

XTAL configuration

• 1-2 connect pin 1 of 40MHz crystal (Y1)

to XTAL

• 2-3 GND

1-2

(XT1 pin1)

Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - B1

J34

Enable 8MHz oscillator power supply

• Open - power off

• Closed - power on

Open

(Power off)

Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - B2

J35

External 8 MHz clock source

• 1-2 OSC-MOD (from oscillator)

• 2-3 EXTAL-SMA (from SMA connector)

1-2

(8 MHz from

oscillator)

Figure 10. Overview of SPC58NHADPT386S

Rev. B mini module - top - B1

UM2640

System clock configuration

UM2640 - Rev 1 page 10/37

Andere Handbücher für SPC58NHADPT386S

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STM320518-EVAL Bedienungsanleitung

ST STEVAL-MKI109V2 Bedienungsanleitung

ST STM32091C-EVAL Bedienungsanleitung

ST AN3954 Montage- und Bedienungsanleitung

ST SPC574KADPT144S Bedienungsanleitung

ST EVAL-7803APSO-SA Bedienungsanleitung

ST SPC584BADPT176S Bedienungsanleitung

ST STM8L1528-EVAL Bedienungsanleitung

ST STM32F4 Series Montage- und Bedienungsanleitung

ST UM2414 Bedienungsanleitung

ST STEVAL-PTOOL2V1 Bedienungsanleitung

ST EVAL-L99H02QF Bedienungsanleitung

ST SPC58XXADPT292S Bedienungsanleitung

ST TN100 RF Bedienungsanleitung

ST STEVAL-IPC002V1 Bedienungsanleitung

ST STM32H747I-DISCO Bedienungsanleitung

ST STM8L1526-EVAL Bedienungsanleitung

ST EVALCOMMBOARD Bedienungsanleitung

ST STM32100B-EVAL Bedienungsanleitung

ST EVALSPEAr320PLC Bedienungsanleitung

ST STM32H753I-EVAL Bedienungsanleitung

ST NUCLEO-8S207K8 Bedienungsanleitung

ST UM0704 Bedienungsanleitung

ST STM32MP157 Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung