ST SPC574KADPT144S Bedienungsanleitung

Introduction

The SPC574KADPT144S Rev. B mini module is an evaluation board supporting STMicroelectronics SPC574K7XE5 device in

ETQFP144 package.

Figure 1. SPC574KADPT144S Rev. B

SPC574KADPT144S Rev. B evaluation board

UM2872

User manual

UM2872 - Rev 1 - May 2021

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC574KADPT144S Rev. B mini module is an evaluation board supporting STMicroelectronics

SPC574K7XE5 microcontroler device in ETQFP144 package.

The SPC574KADPT144S Rev. B mini module is designed to be connected onto the SPC58xxMB motherboard,

offering a mechanism for easy customer evaluation of the SPC574K family of device, and to facilitate hardware

and software development. High density connectors provide the interface between the EVB and MCU daughter

cards and help the developers to evaluate all device peripherals.

This user manual provides information on using SPC574KADPT144S Rev. B mini module board and its hardware

features.

The mini module may be used as a stand-alone unit allowing access to the CPU, but no access to the I/O pins as

any motherboard peripherals.

Figure 2. Overview of SPC574KADPT144S - top

UM2872

Overview

UM2872 - Rev 1 page 2/31

Figure 3. Overview of SPC574KADPT144S - bottom

UM2872

Overview

UM2872 - Rev 1 page 3/31

2License agreement

The packaging of this evaluation board was sealed with a seal stating, by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at:

https://www.st.com/resource/en/evaluation_board_terms_of_use/evaluationproductlicenseagreement.pdf

Upon breaking the seal, you and STMicroelectronics entered into the evaluation board license agreement, a copy

of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use

with other products and is not suitable for any safety or other commercial or consumer application. This

evaluation board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or

implied, including the implied warranties of merchantability and fitness for a particular purpose.

UM2872

License agreement

UM2872 - Rev 1 page 4/31

3Handling precautions

Please take care to handle the package content in order to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2872

Handling precautions

UM2872 - Rev 1 page 5/31

4Hardware description

4.1 Hardware features

The SPC574KADPT144S Rev. B mini module board has the following features:

• It can be used as a stand-alone board by providing external power supplies input (5 V, 3.3 V, 1,25 V)

• Reset button with driver and led indicator

• SPC574KADPT144S Rev. B has the socket for device in ETQFP144 package

• Debug ports:

– 34-pin SAMTEC connector for Nexus 2

– 14-pin header connector for JTAG port

– 12-pin header connector for SIPI interface

• External clock sourses:

– 40 Mhz crystal main oscillator with jumpers to optionally disconnect it

– 8 Mhz oscillator with jumpers to optionally disconnect it

– Clock input through SMA connector to optionally disconnect it

• 2 X SAMTEC QSH series, 240 way connector to connect mini module to the motherboard

4.2 Hardware dimensions

The evaluation board has the following dimensions:

• PCB area: 127 mm X 114.3 mm

• Top components height: 18.8 mm

• Bottom components height: 3.5 mm

• PCB thickness 1.6 mm

4.3 Pin numbering for jumpers

Three pin jumpers for the mini module have rectangular pad to indicate the position of pin 1 and there is the PCB

silk-screen with the number of all pins. See example below for the numbering convention used in this manual for

jumper settings.

Figure 4. Overview of three pin numbering convention

Six pin jumpers for the mini module have the PCB serigraphy with the number of all pins. See example below for

the numbering convention used in this manual for jumper settings.

UM2872

Hardware description

UM2872 - Rev 1 page 6/31

Figure 5. Overview of 6-pin jumper numbering convention

UM2872

Pin numbering for jumpers

UM2872 - Rev 1 page 7/31

5Hardware and jumper setting

5.1 Power supplies

When the mini module is plugged onto the motherboard, the power is supplied directly by the motherboard. In this

setup, the external power supply input available on the mini module should NOT be used.

When the SPC574KADPT144S Rev. B mini module is used as a stand-alone board , the external power supplies

must be used (5 V, 3.3 V, 1,25 V).

The following jumpers are used to configure the power supply:

Table 1. Power supplies configuration jumpers

Jumper Description Default Position

VDD_HV_ADR_S supply enable.

User could provide the voltage

reference via pin 1.

• Open: VDD_HV_ADR_S not

connected to J4 pin2

• Closed: VDD_HV_ADR_S

connected to J4 pin2

Closed

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – C2

VDD_HV_ADR_D supply enable.

User could provide the voltage

reference via pin 1.

• Open: VDD_HV_ADR_D not

connected to J4 pin2

• Closed: VDD_HV_ADR_D

connected to J4 pin2

Closed

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – C2

VDD_HV_ADx voltage configuration:

• 1-2: 5V_LR (linear)

• 2-3: 5V_SW (switching)

1-2 (5V_LR)

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – C1

VDD_HV_ADV supply enable. User

could provide the voltage reference

via pin 1.

• Open: VDD_HV_ADV not

connected to J4 pin2

• Closed: VDD_HV_ADV

connected to J4 pin2

Closed

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – B2

VDD_HV_JTAG_OSC configuration

• 1-2: 5V_SR

• 2-3: 3.3V_SR

1-2 (5V_SR)

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – B2

VDD_HV_PMC supply enable. User

could provide the voltage reference

via pin 1.

• Open: VDD_ PMC not

connected to 5V_SR

• Closed: VDD_ PMC connected

to 5V_SR

Closed

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – A2

VDD_HV_IO_MAIN voltage

configuration:

• 1-2: 5V_SR

• 2-3: 3.3V_SR

1-2 (5V_SR)

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top– C2

UM2872

Hardware and jumper setting

UM2872 - Rev 1 page 8/31

Jumper Description Default Position

VDD_HV_IO_FLEX voltage

configuration:

• 1-2: 5V_SR

• 2-3: 3.3V_SR

1-2 (5V_SR)

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – B2

JP8

Jumper to enable the external core

voltage supply

• Open: J27 not connected to

1.25_SR

• Closed: J27 connected to

1.25_SR

Open

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top– B1

J27

VDD_LV_X configuration:

• 1-2 Open, 3-4 Open, 5-6 Open:

VDD_LV_X not connected to

JP8 (decoupling only)

• 1-2 Open, 3-4 Closed, 5-6

Open:

– VDD_LV_BD not

connected to JP8

(decoupling only)

– VDD_LV1, VDD_LV2,

VDD_LV3 and VDD_LV4

connected to JP8

– VDD_LV_x not connected

to JP8 (decoupling only)

• 1-2 Closed, 3-4 Closed, 5-6

Closed: VDD_LV_X connected

to JP8

• 1-2 Closed, 3-5 Closed, 4-6

Open: VDD_LV_X connected to

JP8

– VDD_LV_BD connected

to JP8

– VDD_LV1, VDD_LV2,

VDD_LV3, VDD_LV4 and

VDD_LV_X shorted for

decoupling only

1-2 Closed

3-4 Closed

5-6 Closed

Figure 10. Overview of

SPC574KADPT144S Rev.

B mini module - top – B2

UM2872

Power supplies

UM2872 - Rev 1 page 9/31

5.2 Port configuration

The following jumpers need to configure the ports:

Table 2. Port related jumpers

Jumper Description Default Position

JP2

PA[8] connection to QSH connectors configuration:

• Open: PA[8] not connected to QSH connectors

(motherboard)

• Closed: PA[8] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

JP3

PA[9] connection to QSH connectors configuration:

• Open: PA[9] not connected to QSH connectors

(motherboard)

• Closed: PA[9] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

JP4

PA[14] connection to QSH connectors configuration:

• Open: PA[14] not connected to QSH connectors

(motherboard)

• Closed: PA[14] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

JP5

PF[13] connection to QSH connectors configuration:

• Open: PF[13] not connected to QSH connectors

(motherboard)

• Closed: PF[13] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

JP6

PD[6] connection to QSH connectors configuration:

• Open: PD[6] not connected to QSH connectors

(motherboard)

• Closed: PD[6] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

JP7

PD[7] connection to QSH connectors configuration:

• Open: PD[7] not connected to QSH connectors

(motherboard)

• Closed: PD[7] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

J11

PF[15] connection to QSH connectors configuration:

• 1-2: PF[15] connected to EVTI

• 2-3: PF[15] connected to EVTO

1-2

(EVTI)

Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

J26

PF[15] connection to QSH connectors configuration:

• Open: PF[15] not connected to QSH connectors

(motherboard)

• Closed: PF[15] connected to QSH

Open Figure 10. Overview of SPC574KADPT144S

Rev. B mini module - top – B2

UM2872

Port configuration

UM2872 - Rev 1 page 10/31

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STEVAL-ISB041V1 Bedienungsanleitung

ST STM8L101-EVAL Bedienungsanleitung

ST STM32 Nucleo-32 Bedienungsanleitung

ST STEVAL-IDB007V1 Bedienungsanleitung

ST SPC570S Series Montage- und Bedienungsanleitung

ST SPC58NHADPT176S Bedienungsanleitung

ST STM32H753I-EVAL Bedienungsanleitung

ST STM32G081B-EVAL Bedienungsanleitung

ST EVB-LIV3F Bedienungsanleitung

ST EVAL-L99ASC03 Bedienungsanleitung

ST STM32429I-EVAL Bedienungsanleitung

ST STM32L152RCT6 Discovery kit Bedienungsanleitung

ST STEVAL-SPIN3202 Bedienungsanleitung

ST STM3241G-EVAL Bedienungsanleitung

ST SPC560D-DIS Bedienungsanleitung

ST L9678-S-EVB Bedienungsanleitung

ST EVALST-3PHISOSD Bedienungsanleitung

ST STEVAL-IPMM10B Bedienungsanleitung

ST X-NUCLEO-CCA02M1 Bedienungsanleitung

ST STM32G4 Nucleo-32 Bedienungsanleitung

ST STM32G070RBT6 Bedienungsanleitung

ST SPC58XXADPT176S Bedienungsanleitung

ST STEVAL-ISB044V1 Bedienungsanleitung

ST STEVAL-WESU1 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung