ST SPC58XXADPT144S REV.B Bedienungsanleitung

SPC58XXADPT144S REV.B Minimodule 1/19 rev1.0 October 27

Release date: October 27th, 2017

The current version of this document makes obsolete all the previous releases

SPC58XXADPT144S REV.B Minimodule 2/19 rev1.0 October 27

October 2017 Edition

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic

or mechanical, including photocopying, recording, storing in an information retrieval system, or

translating, in whole or in part, without the prior written consent of STMicroelectronics.

 
SPC58XXADPT144S REV.B Minimodule 3/19 rev1.0 October 27 
 
Index 
 
Overview................................................................ 4 
1 Package Contents..............................................................5 
2 Supported Device ..............................................................5 
3 Handling precautions .........................................................5 
HARDWARE FEATURE............................................ 6 
1 SPC58XXADPT144S Rev. B Mini module board features .......6 
2 HARWARE dimension and PCB component view..................6 
3HARDWARE & JUMPER SETTINGS ............................ 8 
1 Power supplies ..................................................................8 
2 System clock configuration ................................................8 
3 Reset Circuit......................................................................9 
4 Port Configuration .............................................................9 
5 Chorus 6M configuration ..................................................10 
6 Test Point ........................................................................11 
7 Connectors .....................................................................11 
4BOM AND SCHEMATIC............................................ 12 
5REVISION HISTORY ................................................ 18

SPC58XXADPT144S REV.B Minimodule 4/19 rev1.0 October 27

1. Overview

The SPC58XXADPT144S Rev. B mini module is an evaluation board supporting

STMicroelectronics SPC58xGxxE5, SPC58xCxxE5 and SPC58xBxxE5 microcontrollers in

eTQFP144 package with exposed pad down.

The mini module is designed to be connected onto the SPC57xxMB motherboard, offering a

mechanism for easy customer evaluation of the supported devices, and to facilitate hardware

and software development.

The mini module may be used as a stand-alone unit allows access to the MCU, but no access

to the I/O pins as any motherboard peripherals.

The mini module is default configured for Chorus 1M, 2M and 4M easily supports also

Chorus 6M simply changing the following 3 TH jumper: JR14, JR18 & JR19, with the only

drawback that some ports are not mapped/aligned properly.

To configure the full mini module for Chorus 6M and correctly map the port must change the

jumpers as shown in chapter 3.5 (Chorus 6M Configuration).

Figure 1: Overview of SPC58XXADPT144S Rev. B Mini module - Top

SPC58XXADPT144S REV.B Minimodule 5/19 rev1.0 October 27

Figure 2: Overview of SPC58XXADPT144S Rev. B Mini module - Bottom

1.1 Package Contents

An SPC58XXADPT144S Rev. B adapter package includes the following items:

•SPC58XXADPT144S Rev. B mini module

•Mini CD with User Manual

1.2 Supported Device

The SPC58XXADPT144S Rev .B mini module support the following STMicroelectronics

family of microcontrollers in eTQFP144 package with exposed pad down:

•Chorus 6M : SPC58xGxxE5

•Chorus 4M : SPC58xCxxE5

•Chorus 2M /Chorus 1M : SPC58xBxxE5

1.3 Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic

discharge.

SPC58XXADPT144S REV.B Minimodule 6/19 rev1.0 October 27

2. HARDWARE FEATURE

2.1 SPC58XXADPT144S Rev. B Mini module board features

The SPC58XXADPT144S Rev. B mini module board has the following features:

•Connector for external power supplies input (5V, 3.3V, 1.25V) used in stand-alone

mode.

•Reset button with driver and led indicator.

•Socket for device in eTQFP144 package with exposed pad down.

•Debug ports: 38-pin Mictor connector for Nexus level 3+, 14-pin header connector for

JTAG port and 10-pin header connector for JTAG/DigRF port (LFAST).

•40 Mhz crystal main oscillator with jumpers to optionally disconnect it

•8 Mhz oscillator with jumpers to optionally disconnect it

•Clock input through SMA connector to optionally disconnect it

•Jumpers for boot configuration

•2 X SAMTEC QSH series, 240 way connector to connect minimodule to Motherboard

2.2 HARWARE dimension and PCB component view

The minimodule has the following dimension:

•127mm X 114.3mm (PCB dimension)

•Max Top components height 16,5mm

•PCB thickness 1.6mm

•Max Bottom components height 3.5mm

Figure 3: SPC58XXADPT144S REV.B top component view

SPC58XXADPT144S REV.B Minimodule 7/19 rev1.0 October 27

Figure 4: SPC58XXADPT144S REV.B bottom component view

SPC58XXADPT144S REV.B Minimodule 8/19 rev1.0 October 27

3HARDWARE & JUMPER SETTINGS

3.1 Power supplies

When the mini module is plugged onto the motherboard, power is supplied directly by the

motherboard. In this setup, the external power supply input available on the minimodule

should NOT be used.

When the mini module is used as a stand-alone board, external power supplies must be used

(5V, 3.3V, 1.25V).

The following jumpers are used to configure the power supply (common for all supported

devices):

Jumper

Description

Default

Jumper to enable the use of Supply 3.3V_SR

Closed

Jumper to enable the use of Supply 5.0V_SR

Closed

Jumper to enable the use of Supply 1.25V_SR

Closed

Used only for Chorus 6M - VDD_HV_ADR_D voltage

configuration, select from 5.0V_LR (linear), 3.3V_SR (switching)

or 5.0V_SR (switching).

1-2 (5.0V_LR)

VDD_HV_ADR_S voltage configuration, select from 5.0V_LR

(linear), 3.3V_SR (switching) or 5.0V_SR (switching)

1-2 (5.0V_LR)

VDD_HV_ADV_S voltage configuration, select from 5.0V_LR

(linear), 3.3V_SR (switching) or 5.0V_SR (switching)

1-2 (5.0V_LR)

VDD_HV_IO_MAIN voltage configuration, select from

5.0V_SR or 3.3V_SR

1-2 (5.0V_SR)

VDD_HV_IO_FLEX voltage configuration, select from

5.0V_SR or 3.3V_SR

1-2 (5.0V_SR)

J10

VDD_LV voltage configuration, select from

1.25V_SR or BALLAST circuit

1-2 (1.25V_SR)

J11

Supply for BALLAST circuit configuration, select from

VDD_HV_IO_MAIN or 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

JP1

VDD_HV_FLA voltage configuration, connect or

disconnect VDD_HV_FLA from VDD_HV_IO_MAIN

Closed

(Connect VDD_HV_FLA

to VDD_HV_IO_MAIN)

Table 1: POWER SUPPLY CONFIGURATION JUMPERS

3.2 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Jumper

Description

Default

J15

40 MHz crystal clock source Enable for pin EXTAL

1-2 (XT1 pin2)

J17

40 MHz crystal clock source Enable for pin XTAL

1-2 (XT1 pin1)

J19

Enable 8MHz oscillator power supply

Open

J21

External clock source from 8MHz oscillator or SMA connector

1-2 (8MHz oscillator)

Table 2: CLOCK CONFIGURATION JUMPERS

SPC58XXADPT144S REV.B Minimodule 9/19 rev1.0 October 27

3.3 Reset Circuit

The minimodule supports different way to reset the microcontroller.

To use and perform the reset driving there are different jumper and switch:

Jumper

Description

Default

SW1

Reset push button

Open

J22

Connect the external reset to the reset driver

for ESR0 and PORST pins

J20

Connect the external reset to ESR0 pin

J25

Connect the external reset to PORST pin

Table 3: RESET CONFIGURATION JUMPERS

3.4 Port Configuration

The following jumpers need to configure the ports:

Jumper

Description

Default

JP13

TESTMODE settings

(10KΩ pull-down)

J13

RSTIN configuration

•1-2: ESR0

•2-3: PORST

2-3

(PORST)

JP2

JTAG/DigRF pin 9 configuration

•1-2: EVTO

•2-3: ESR0

1-2

(EVTO)

JP3

PIN26 configuration

•1-2: PG1

•2-3: EVTI(CHORUS 1M)

Closed 1-2

JP4

EVTI SWITCH configuration

•1-2: to JP3(CHORUS 1M)

•2-3: to JP5(CHORUS 6M)

Closed 1-2

JP5

PM5/EVTI configuration

•1-2: PM5

•2-3: EVTI(CHORUS 6M)

Closed 1-2

JP6

PIN27 configuration

•1-2: PG2

•2-3: EVTO(CHORUS 1M)

Closed 1-2

JP7

EVTO SWITCH configuration

•1-2: to JP6(CHORUS 1M)

•2-3: to JP8(CHORUS 6M)

Closed 1-2

JP8

PIN130 configuration

•1-2: PM6

•2-3: EVTO(CHORUS 6M)

Closed 1-2

Table 4: PORT CONFIGURATION JUMPERS

SPC58XXADPT144S REV.B Minimodule 10/19 rev1.0 October 27

3.5 Chorus 6M configuration

The following jumpers need to configure the board for support the Chorus 6M:

Jumper

Description

Default

JR2

Device pin 134 port configuration

1-2

(Closed with PCB trace for connect pin 134 to PC[13] )

JR3

Device pin 133 port configuration

1-2

(Closed with PCB trace for connect pin 133 to PC[14] )

JR4

Device pin 132 port configuration

1-2

(Closed with PCB trace for connect pin 132 to PC[15] )

JR5

Device pin 40 port configuration

1-2

(Closed with PCB trace for connect pin 40 to PI[7] )

JR6

Device pin 34 port configuration

1-2

(Closed with PCB trace for connect pin 34 to PI[5] )

JR7

Device pin 32 port configuration

1-2

(Closed with PCB trace for connect pin 32 to PI[3] )

JR8

Device pin 30 port configuration

1-2

(Closed with PCB trace for connect pin 30 to PI[1] )

JR9

Device pin 20 port configuration

1-2

(Closed with PCB trace for connect pin 20 to PI[8] )

JR10

Device pin 39 port configuration

1-2

(Closed with PCB trace for connect pin 39 to PI[6] )

JR11

Device pin 33 port configuration

1-2

(Closed with PCB trace for connect pin 33 to PI[4] )

JR12

Device pin 31 port configuration

1-2

(Closed with PCB trace for connect pin 31 to PI[2] )

JR15

Device pin 141 port configuration

1-2

(Closed with PCB trace for connect pin 141 to PM[2] )

JR16

Device pin 140 port configuration

1-2

(Closed with PCB trace for connect pin 140 to PM[0] )

JR17

Device pin 135 port configuration

1-2

(Closed with PCB trace for connect pin 135 to PK[14] )

JR14

Device pin 98 port configuration /

function configuration

1-2

(connect pin 98 to ESR0 )

JR18

Device pin 25 port configuration /

function configuration

1-2

(connect pin 25 to AGND )

JR19

Device pin 24 port configuration /

function configuration

1-2

(connect pin 24 to VDD_HV_ADR_D )

Table 5: CHORUS 6M CONFIGURATION JUMPERS

Andere Handbücher für SPC58XXADPT144S REV.B

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST FDA803S Bedienungsanleitung

ST STEVAL-PCC008V1 Bedienungsanleitung

ST STM3241G-EVAL Bedienungsanleitung

ST STA304 Bedienungsanleitung

ST STLINK-V3SET Bedienungsanleitung

ST UM1461 Bedienungsanleitung

ST TN100 RF Bedienungsanleitung

ST VM6101 Bedienungsanleitung

ST EVAL-TDA7803A Bedienungsanleitung

ST SPC564A-DISP Montage- und Bedienungsanleitung

ST STM32L4R9I-EVAL Bedienungsanleitung

ST STM8L1526-EVAL Bedienungsanleitung

ST STM32100B-EVAL Bedienungsanleitung

ST STEVAL-L6982CDR Bedienungsanleitung

ST ST7 Series Bedienungsanleitung

ST STEVAL-PCC008V1 Bedienungsanleitung

ST STM8L1528-EVAL Bedienungsanleitung

ST SPC560P-DISP Bedienungsanleitung

ST UM1935 Bedienungsanleitung

ST STUSB02E Bedienungsanleitung

ST STM32F103RET6 Bedienungsanleitung

ST EVALST-3PHISOSD Bedienungsanleitung

ST EVALSP320SCPU Bedienungsanleitung

ST STM32G0C1E-EV Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung