ST STEVAL-IDB007V Series Bedienungsanleitung
Introduction
The STEVAL-IDB007Vx (STEVAL-IDB007V1/STEVAL-IDB007V2) is an evaluation board based on BlueNRG-1 (QFN32
package).
The STEVAL-IDB008Vx (STEVAL-IDB008V1/STEVAL-IDB008V2) is an evaluation board based on BlueNRG-2 (QFN32
package).
The STEVAL-IDB008V1M is an evaluation board based on BlueNRG-M2SA module (BlueNRG-2 QFN32 package).
The STEVAL-IDB009Vx (STEVAL-IDB009V1) is an evaluation board based on BlueNRG-2 (QFN48 package).
BlueNRG-1 (QFN32 package) and BlueNRG-2 (QFN32 and QFN48 packages) are low power Bluetooth® smart systems-on-
chip compliant with the Bluetooth® specification and support master, slave and simultaneous master-and-slave roles.
The document content is valid for the STEVAL-IDB007Vx, STEVAL-IDB008Vx and STEVAL-IDB009Vx platforms. Any specific
difference is highlighted whenever it is needed.
Getting started with STEVAL-IDB007Vx, STEVAL-IDB008Vx and STEVAL-
IDB009Vx evaluation boards
UM2094
User manual
UM2094 - Rev 7 - October 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
Figure 3. STEVAL-IDB008V1 development platform
based on BlueNRG-2 SoC
Figure 4. STEVAL-IDB008V2 development platform
based on BlueNRG-2 SoC
UM2094
Development platforms
UM2094 - Rev 7 page 3/14
Figure 5. STEVAL-IDB009V1 development platform
based on BlueNRG-2 SoC in QFN48 package
Figure 6. STEVAL-IDB008V1M development platform
based on BlueNRG-M2SA module with embedded BlueNRG-2 SoC
UM2094
Development platforms
UM2094 - Rev 7 page 4/14
2Acronyms and abbreviations
Table 1. List of acronyms
Acronym Description
BLE Bluetooth low energy
DK Development kit
SW Software
USB Universal serial bus
UM2094
Acronyms and abbreviations
UM2094 - Rev 7 page 5/14
3Getting started
The evaluation board is preprogrammed with sensor profile firmware (BLE_SensorDemo.hex), which allows
setting and establishing a connection with a smartphone (iOS or Android).
Any Bluetooth Low Energy device like a smartphone can connect to the BLE sensor profile demo.
For example, the LightBlue application can connect to the sensor profile device. When you use the LightBlue
application, detected devices appear on the screen with the BlueNRG name. By tapping on the box to connect
to the device, the screen shows a list of all the available services; tapping a service shows the characteristics for
that service.
The sensor profile firmware implements a proprietary Bluetooth profile that exposes two services: acceleration
and environmental service.
The acceleration service contains the following characteristics:
• acceleration, which gives the current value of the acceleration detected by the MEMS sensor on the
evaluation board
• free fall characteristic, which allows detection of free-fall condition by the LSM6DS3 MEMS sensor on the
evaluation board (the condition is detected if the acceleration on the three axes is near zero for a certain
amount of time).
The environmental service contains characteristics that expose data from some environmental sensors, such as
temperature sensors.
3.1 Powering up the evaluation board running the sensor profile firmware
(peripheral role)
Two power options are available:
•Batteries - To power the selected evaluation board using batteries, 2 AAA batteries must be inserted into
the battery holder at the rear of the board, and jumper JP1 set to position 2-3 and jumper JP2 set to position
1-2 (Figure 7. Board power options).
Note: In battery operating mode, if R59, R60 and R62 resistors are mounted, you should remove them to make
LSM6DS3 function correctly.
•USB - To power the selected evaluation board through USB, jumper JP1 must be in position 1-2 and jumper
JP2 set to position 2-3 (Figure 7. Board power options ). Connect a USB cable to the micro-USB connector
(Figure 7. Board power options) and to a PC USB port.
Once powered, the evaluation board sensor profile firmware starts advertising, waiting for a smartphone to
connect to it.
UM2094
Getting started
UM2094 - Rev 7 page 6/14
Figure 7. Board power options
UM2094
Powering up the evaluation board running the sensor profile firmware (peripheral role)
UM2094 - Rev 7 page 7/14
4Software demonstration applications
• In order to develop a software application for the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-
IDB009Vx evaluation board, it is recommended to start with the reference demonstration applications
provided within the BlueNRG-1_2 DK SW package for BlueNRG-1, BlueNRG-2 BLE stack v2.x family
(STSW-BLUENRG1-DK) available on the STEVAL-IDB007Vx, STEVAL-IDB008Vx, STEVAL-IDB009Vx web
pages.
• Unzip the file, launch the related installer and follow installation steps.
• Wait for the package installation to complete.
• The Projects folder in DK SW package contains the available demonstration applications, IAR projects,
sources and header files.
• IAR Embedded Workbench for ARM (EWARM) tool is needed for building and downloading software
applications running on the BlueNRG-1, BlueNRG-2 microcontrollers.
Note: For a description of the available BlueNRG-1, BlueNRG-2 demonstration applications and supported platforms,
refer to BlueNRG-1, BlueNRG-2 development kits user manual available on the related web page. The
BLE_SensorDemo.hex prebuilt binary images for BlueNRG-1, BlueNRG-2 platforms are also provided within
the DK software package, in the Firmware folder.
Keil MDK-ARM and WiSE-Studio for ARM (GCC) toolchains projects are also available.
UM2094
Software demonstration applications
UM2094 - Rev 7 page 8/14
5References
Table 2. Reference information
What Where Description
BlueNRG-1 Bluetooth Low
Energy wireless System on
Chip
BlueNRG-1 BlueNRG-1 device web page
BlueNRG-2 Bluetooth Low
Energy wireless System on
Chip
BlueNRG-2 BlueNRG-2 device web page
Bluetooth Low Energy
Specification
https://www.bluetooth.org/en-us/specification/
adopted-specifications
Bluetooth Low Energy specification web
page
STSW-BLUENRG1-DK
STEVAL-IDB007V1, STEVAL-IDB007V2,
STEVAL-IDB008V1, STEVAL-IDB008V2 and
STEVAL-IDB009V1 web pages, Tools and
Software section
BlueNRG-1_2 DK SW package for
BlueNRG_1, BlueNRG-2 BLE stack v2.x
family, with reference demonstration
applications
STEVAL-IDB007V1(1) BlueNRG-1, Evaluation Tools section STEVAL-IDB007V1 platform web page
STEVAL-IDB007V2 BlueNRG-1, Evaluation Tools section STEVAL-IDB007V2 platform web page
STEVAL-IDB008V1(1) BlueNRG-2, Evaluation Tools section STEVAL-IDB008V1 platform web page
STEVAL-IDB008V2 BlueNRG-2, Evaluation Tools section STEVAL-IDB008V2 platform web page
STEVAL-IDB009V1 BlueNRG-2, Evaluation Tools section STEVAL-IDB009V1 platform web page
STEVAL-IDB008V1M BlueNRG-2, Evaluation Tools section STEVAL-IDB008V1M platform web page
UM2071
STEVAL-IDB007V1, STEVAL-IDB007V2,
STEVAL-IDB008V1, STEVAL-IDB008V2 and
STEVAL-IDB009V1 web pages
BlueNRG-1, BlueNRG-2 Development Kits
User Manual
1. This board is no longer available for purchase.
UM2094
References
UM2094 - Rev 7 page 9/14
Revision history
Table 3. Document revision history
Date Revision Changes
14-Jul-2016 1 Initial release.
19-Dec-2016 2 Updated STEVAL-IDB007V1 Bluetooth® low energy evaluation board on the cover page.
23-Oct-2017 3
Added: reference to STEVAL-IDB008V1 BlueNRG-2 evaluation platform, reference to BlueNRG-1_2
DK SW package for BLE stack v2.x family and reference to BlueNRG-1_V1 DK SW package for
BLE stack v1.x family.
02-May-2018 4 Updated Introduction.
Added references to STEVAL-ID007V2 and STEVAL-IDB008V2 evaluation platforms.
27-Nov-2018 5
Updated title and Introduction.
Added Section 1 Development platforms and references to the STEVAL-IDB009V1 evaluation
platform (BlueNRG-2 QFN48 package).
20-Mar-2019 6
Updated Section 3.1 Powering up the evaluation board running the sensor profile firmware
(peripheral role).
Removed references to BlueNRG-1_V1 DK SW package.
13-Oct-2021 7 Added reference to STEVAL-IDB008V1M development platform. Updated Section 3 Getting
started and Section 5 References.
UM2094
UM2094 - Rev 7 page 10/14
Andere Handbücher für STEVAL-IDB007V Series
1
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere ST Hauptplatine Handbücher
ST
ST STM8L1528-EVAL Bedienungsanleitung
ST
ST STM32MP157D-EV1 Bedienungsanleitung
ST
ST X-NUCLEO-IDW01M1 Bedienungsanleitung
ST
ST STLINK-V3SET Bedienungsanleitung
ST
ST STM32G0C1E-EV Bedienungsanleitung
ST
ST EnFilm EFL1K0AF39 Bedienungsanleitung
ST
ST STM32L476G-EVAL Bedienungsanleitung
ST
ST STM8L1526-EVAL Bedienungsanleitung
ST
ST SPC5-UDESTK Bedienungsanleitung
ST
ST STM3241G-EVAL Bedienungsanleitung
ST
ST STM32439I-EVAL Bedienungsanleitung
ST
ST ST72F651 Bedienungsanleitung
ST
ST STM32429I-EVAL Bedienungsanleitung
ST
ST NUCLEO-G070RB Bedienungsanleitung
ST
ST STEVAL-LVLP01 Bedienungsanleitung
ST
ST STEVAL-IDB011V1 Bedienungsanleitung
ST
ST NUCLEO-F031K6 Bedienungsanleitung
ST
ST PractiSPIN UM0696 Bedienungsanleitung
ST
ST EVALSP1310CPU Bedienungsanleitung
ST
ST STEVAL-ILL059V1 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
