Star Micronics WinType 800C Bedienungsanleitung

The Windows™ Color Presentation Printer

WinType 800C

Users Manual

80825100

Bescheinigung des Importeurs

Hiermit wird bescheinigt, daß der

COMPUTER DRUCKER TM300

in Übereinstimmung mit den Bestimmungen der

VDE 0878 3/22.89, EN 55022: 1987, BMPT Vfg. 243/1991 und 46/1992

funk-entstört ist.

Dem Bundesamt für Zulassungen in der Telekommunikation wurde das Inverkehrbringen dieses Gerätes

angezeigt und die Berechtigung zur Überprüfung der Serie auf die Einhaltung der Bestimmungen eingeräumt.

Star Micronics Deutschland, GmbH

Westerbachstraße 59, D-60489

Frankfurt, Germany

The above statements apply only to printers marketed in Germany.

Trademark Acknowledgments

TrueType: Apple Computer, Inc.

Windows 3.1, MS-DOS: Microsoft Corporation

Notice

express permission is forbidden.

• The contents of this manual are subject to change without notice.

All efforts have been made to ensure the accuracy of the contents of this manual at the time of press.

However, should any errors be detected, STAR would greatly appreciate being informed of them.

• The above notwithstanding, STAR can assume no responsibility for any errors in this manual.

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Note: The following cable must be used to comply with FCC Regulations as well as to avoid interference

to home equipment.

Interface cable: Twisted-pair shielded cable

Non-shieldedA.C. Power Cord

Do not attempt to modify this equipment. If modified, your authority to operate this equipment might be

voided by the FCC.

The above statement applies only to printers marketed in the U.S.A.

Statement of The Canadian Department of Communications Radio InterferenceRegulations

This digital device does not exceed the Class B limits for radio noise emissions from digital apparatus set out

in the Radio Interference Regulations of the Canadian Department of Communications.

Leprésent appareil numérique n'emenpas de bruits radioélectriques dépassantles limits applicable auxappareils

numériques de la classe B prescrites dan le Règlement sur le brouillage radioélectrique édicté par le minisère

des Communications du Canada.

The above statement applies only to printers marketed in Canada.

Contents Introduction iii

A word about the printer iii

System requirements iii

This users manual iii

How to use this manual iv

Features of the printer iv

Printer components v

Chapter 1 Setting up your printer 1

Unpacking and checking the package contents 1

Package contents 1

Genuine Star supplies 2

Placing the printer 3

Preparing to print 3

Loading coated paper 4

Installing the film roll 5

Connecting the power cord 8

Performing a test print 8

Connecting the printer to your computer 9

Chapter 2 Installing the printer driver and TrueType fonts 11

System requirements 11

Installing the printer driver and TrueType fonts 11

TrueType font samples 14

Chapter 3 Printing with WinType 800C 15

The control panel 15

The Paper lamp 15

The Film Roll lamp 15

The Ready lamp 15

The Ready button 15

Features of the printer 16

Recommended print media 16

Operating the printer 17

Turning ON the power to the printer 17

Turning OFF the power to the printer 17

Loading print media 17

The paper tray 17

Manual loading 19

Printable area 19

Getting ready to print 21

Printing 23

DIP switch settings 23

Changing halftones and image quality 24

Changing halftones 24

Changing gamma correction 25

Changing color balance 26

High speed printing 26

Print speed 28

Other buttons in the Options dialog box 29

Black Representation 29

Intensity 30

Photo 30

Text 30

Printing on Special A4 and Legal size media 31

Replacing the film roll 33

Changing the film roll setting 35

Printing with iron-on transfer 37

Steps for printing on the transfer sheets 37

Steps for transferring the image on the cloth 38

Steps for the finishing process 39

Chapter 4 Maintenance & troubleshooting 41

Maintaining your printer 41

Cleaning the outside of the printer 41

Cleaning the inside of the printer 41

Clearing paper jams 46

Transporting your printer 48

Troubleshooting 51

Other DIP switch settings 55

Pinout of interface connector 56

Chapter 5 Reference information 57

Specifications 57

Glossary 60

Index 64

iii

Introduction

Thank you for purchasing the Star WinType 800C color presentation laser quality printer.

This Users Manual has been organized into five chapters, a glossary and an index to

help you learn the proper operation and care of your printer. The first three chapters

explain the basic care and handling of this printer and the operation of the printer driver

software. The remaining chapters are intended as a reference guide for troubleshooting

any printing problems you may encounter.

A word about the printer

The Star WinType 800C is a new type of color presentation laser quality printer that has

been developed specifically for users of Windows™ version 3.1. This printer comes

with the WinType software and it does not require special add-in cards or cartridges.

This printer will only print from Windows applications. It will not function in any DOS

application.

System requirements

To operate this printer you need an IBM compatible PC with at least a 386SX 16-MHz

CPU and at least 8 megabytes (MB) of PC memory (RAM). The PC must be running

DOS 3.3 or later and Windows 3.1 in Enhanced Mode. A Microsoft-compatible mouse

is highly recommended. You must also have a 3.5" floppy disk drive. A standard PC

parallelprinter portis requiredto connect theprinter usinga standardhighquality shielded

Centronics parallel cable.

This users manual

Chapter 1 Setting up your printer

This chapter explains the basic procedures for unpacking, placing and connecting your

printer.

Chapter 2 Installing the printer driver software and

TrueType fonts

This chapter details the procedures used to install the Star WinType 800C printer driver

software and TrueType fonts. You must install the printer driver software to be able to

print.

Chapter 3 Printing

This chapter explains how to operate your printer and the printer driver software.

Chapter 4 Maintenance & troubleshooting

This chapter explains the proper procedures for routine maintenance and care of your

printer and a quick reference to help you solve any problems which you may occur.

Chapter 5 Reference information

This chapter lists the printer's specifications.

Glossary

This provides you with the definitions of commonly used printer and computer words.

Index

This lists, in alphabetical order, topics which appear in this manual.

How to use this manual

Each chapter provides you with simple explanations of the printer's operation. We have

included illustrations of the printer and Windows screens wherever necessary and wher-

ever space allowed. You should be able to operate this printer by carefully following

each of the steps provided.

Features of the printer

This printer is capable of laser quality color page printing on Letter,A4, Legal and Spe-

cialA4 size coated, presentation quality smooth paper, OHP (overhead projection) film

and iron-on transfer sheets.

The main features of the printer include:

• Full color and monochrome laser quality printing

• Up to 2 pages per minute using monochrome film rolls and 1 page per minute using

4 color film rolls.

• Laser quality 300 dots per inch resolution

• Prints documents made using virtually any Windows 3.1 application software

• 35 Scalable TrueType fonts for Windows 3.1 applications

• Meets or exceeds all requirements of the Environmental ProtectionAgency's Energy

Star program

• Printouts require no drying time

• Printouts do not bleed, smear nor wrinkle

• Compact and stylish design

Printer components

Paper tray base

This holds your print media.

Top cover release

Press this to open the

printer's top cover.

Control panel

The control panel includes the Ready

button and the Ready, Paper and

Film Roll lamps.

Paper tray

The paper tray cover and the paper

tray base, when put together, are

called the paper tray.

Paper tray cover

This covers the paper tray.

Parallel interface connector

This connects the printer to the computer.

Power switch

AC cord socket

DIP switches

Top cover

Air vents

Top cover support

Thermal head Bobbin sockets

These are used to mount the film

roll to the inside of the printer.

Platen roller

vii