Star systems HRD1800F Bedienungsanleitung

Ranger USB Reader

Model No: HRD1800F

User Guide

V1.2

Document History

Table of Content

Reader Overview...............................................................................................................................2

Package Content ...............................................................................................................................3

Installing the reader..........................................................................................................................3

Mechanical installation.........................................................................................................3

Software installation ............................................................................................................3

System requirement..................................................................................................................4

Driver installation......................................................................................................................4

Ensure the reader is connected properly..................................................................................4

Troubleshooting ........................................................................................................................5

Using the reader ...............................................................................................................................5

Tag placement...............................................................................................................................5

Running the demo software .........................................................................................................5

Reading tags in Inventory Mode ...............................................................................................7

Tag Memory Management........................................................................................................7

Reader Settings ........................................................................................................................9

Communication setting...........................................................................................................10

Q-Value Setting .......................................................................................................................10

Frequency Power Setting ........................................................................................................10

Reader Specification .......................................................................................................................11

Warranty Terms...............................................................................................................................11

Disclaimer and Limitation of Liability..............................................................................................12

Regulatory Compliance...............................................................................................................12

Date

Ver

Description

Edit by

2015/09/20

V1.0

Draft

Jet

2015/09/29

V1.1

Minor amendment

Jet

2015/10/08

V1.2

Added Photos to package

content

Jet

Reader Overview

The Ranger is a new compact, full-featured ISO18000-6C/EPC C1G2 reader which is perfect

for use in a variety of tag reading, writing and programming applications.

Ranger is powered by a standard USB connection (requires USB 2.0 or above), no additional

power supply is needed. Its small size allows it to easily be used on a desktop or where

space is limited.

The Ranger Reader is very user friendly and extremely easy to set up read and write tags

with its standard free software. It also comes with a SDK to allow you to create your own

custom programs to interface and drive the Ranger Reader.

The Ranger reader’s features provides a powerful, and very economical way to implement

UHF RFID technology in just about any application.

Possible Applications:

Point of Sale RFID reading and writing

Commissioning/Activation of RFID Tags

Parking and Access Control

Production / WIP checkpoints

Document Tracking and Management

Library Management

Catering Management

Healthcare/Pharmaceutical Applications

The reader has 2 LEDs as status indicators. The LEDs provide indication for the following:

Status \ LEDS

Blue

Red

Connected to Host

Off

Tag read/write operation

Flash

Package Content

Ranger Reader x 1

USB Cable x 1

Installing the reader

The reader is intended to work on a desktop environment. We recommend to operate

the reader on a NON-Metal desktop surface. Since metal cause reflection of RF, and may

cause undesirable performance of the reader.

Mechanical installation

Connect the USB cable to the reader and to the host PC. The reader requires USB 2.0 or

above to operate on a PC.

The reader’s LED should turn on upon successful connection.

Software installation

The reader requires installation of driver to function properly.

System requirement

64 MB Ram

200 MB of Harddisk space

Windows 2000, Windows Vista, Windows 7 and Windows 8

Driver installation

The Ranger Reader use serial protocol to communicate with host PC. In order for the host PC to be

able to communicate with the reader, it may be necessary to install the USB to serial driver.

1. Unzip “CP210x_VCP_Windows.zip”

2. If your operating system is running 64bits, run“CP210xVCPInstaller_x64.exe”Otherwise if ，

your operating system is running 32bits, run“CP210xVCPInstaller_x86.exe”.

3. Follow the on screen instruction of the installer.

Ensure the reader is connected properly

1. Go to Control Panel > Device Manager

2. Open tab（COM 和LPT）”，

3. You should see “CP201x USB to UTRA bridge(COM X)”where X is the port number

assigned by the PC

Troubleshooting

If you cannot see the “CP201x USB to UTRA bridge” in device manager, ensure the USB cable

connect to the reader properly and the reader LED is on.

If you see a (!) symbol at the side of the “CP201x USB to UTRA bridge” in device manager, this

indicates that the PC is not able to run the driver properly. You can try:

1. Re-install the driver as it may be corrupted.

2. Connect to another USB port of the PC.

Using the reader

Tag placement

To ensure the tag read and write operations can be perform with a consistent performance, please

ensure to place the tag’s whole inlay within the surface of the reader.

Running the demo software

Connect the reader to the PC using the USB cable before running the test tool.

Upon successful connection of the test tool with the reader, you will be able to hear two beeps from

the reader. A pop up window will be shown as followed:

If the software failed to connect to the reader automatically, you will see a pop up error message:

In case where the software failed to automatically connect the correct com port, you can manually

input the com port to connect to.

1. Go to Settings

2. Go to the “Com” tab

3. Change the value of the “Serial Ports”*

**You can go to Window> Control Panel>Device Manager to check the Com Port number that the

reader is using, please refer to section driver installation section.

Reading tags in Inventory Mode

At the main page, click “Start Inventory” Button, information on tag being read will be displayed in

the center of the screen as a list. If multiple tags are being read, multiple records will be shown.

To stop the reader from reading tags, click “Stop Inventory Run” Button.

To clear the tag data read, click “Clear Inventory” button.

Tag Memory Management

To perform read/write operation on individual tag’s memory banks, right click on the tag data record

to bring up the option Menu.

Change EPC

To change EPC click on the Change EPC option and a window will pop up.

Input the new EPC and access password (if necessary).

Finally click ok to confirm the change, the reader will write the new EPC

to the tag.

Tag memory banks data operation

To read/write other memory banks of the click on Data Operation option. A

new window will pop-up.

Select different memory banks to read/write.

Tag locking operation can also be performed in this window.

Reader Settings

To change settings of the reader, click on the setting buttons on the right to bring out the setting

menu. There are 3 tabs in the pop-up menu that user can choose from.

Inhaltsverzeichnis

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch