Starrett 64381 Bedienungsanleitung

Trust Is In The Name User Manual

PKG08804- UM128

2 PKG08804-UM128 09/17 PDF

READ THIS MANUAL BEFORE USING THE INSTRUMENT

ANTES DE UTILIZAR EL INSTRUMENTO,

LEA ATENTAMENTE ESTE MANUAL

LIRE CE MANUEL AVANT D'UTILISER L'INSTRUMENT

LEIA ATENTAMENTE ESTE MANUAL ANTES

DE UTILIZAR O INSTRUMENTO

使用仪器前请阅读本操作手册

DIESES HANDBUCH VOR DER VERWENDUNG

DES MESSGERÄTS LESEN

LEGGERE ATTENTAMENTE QUESTO MANUALE PRIMA

DI UTILIZZARE QUESTO STRUMENTO

PKG08804-UM128 3

128 INSIDE MICROMETER WITH

STANDARD MICROMETER HEAD

USER MANUAL

4 PKG08804-UM128

TABLE OF CONTENTS

Components 5

128 with Micrometer Head Only 8

128 Combination Head and Master Usage Instructions 9

Spanish 15

French 23

Portuguese 31

Chinese 39

German 47

Italian 55

PKG08804-UM128 5

COMPONENTS

1. Reference Surface

- Superﬁcie de referencia

- Surface de référence

- Superfície de referência

-参照面

- Bezugsﬂäche

- Superﬁcie di riferimento

2. Setting Master

- Patrón de ajuste

- Étalon de réglage

- Padrão de ajuste

-安装基架

- Bezugsformstück

- Master di azzeramento

3. Reference Surface

- Superﬁcie de referencia

- Surface de référence

- Superfície de referência

-参照面

- Bezugsﬂäche

- Superﬁcie di riferimento

4. Base/Zero Reference

- Referencia de base/cero

- Base/référence de mise à zéro

- Base/Referência zero

-基准/零位参照

- Sockel/Nullreferenz

- Riferimento di base/azzeramento

5. Thread to Connect Extensions

- Rosca para conectar extensiones

- Filetage de ﬁxation des rallonges

- Rosca para conectar extensões

-延管连接螺纹

- Gewinde zum Anschließen der

Verlängerungen

- Filettature per unire le prolunghe

6. Indicator Housing

- Caja del indicador

- Logement du comparateur

- Caixa do indicador

-指示盘外壳

- Messuhrgehäuse

- Corpo del comparatore

7. Micrometer Lock Nut

- Seguro tipo anillo para el

micrómetro

- Contre-écrou du micromètre

- Porca de ﬁxação do micrômetro

-千分尺锁紧螺母

- Mikrometer-Sicherungsmutter

- Dado di bloccaggio del

micrometro

8. Barrel

- Cilindro

- Corps

- Cilindro

-套管

- Trommel

- Tamburo

9. Shell

- Casco

- Tube

- Bainha

-外环

- Hülle

- Guscio

10. Measuring Contact Surface

- Superﬁcie de medición por

contacto

- Touche

- Superfície de contato da medição

-测量接触面

- Messkontaktﬂäche

- Superﬁcie di contatto di

misurazione

128 INSIDE MICROMETER WITH

STANDARD MICROMETER HEAD

PKG08804-UM128 7

THIS IS A STARRETT USER GUIDE FOR THE

128 INSIDE MICROMETER WITH STANDARD

MICROMETER HEAD.

ALL SPECIFICATIONS IN THIS DOCUMENT ARE

CORRECT AT TIME OF PRODUCTION AND ARE

SUBJECT TO CHANGE. PLEASE CONTACT STARRETT

FOR FURTHER INFORMATION.

8 PKG08804-UM128

ENGLISH

128 WITH MICROMETER HEAD ONLY

The desired range is obtained by using the extension rods

and rod points with the 2" (50mm) range micrometer

head (see Table 1). The necessary combination of rods

with the micrometer head are joined together by threaded

connections. They are brought to seat on hardened and

lapped faces with a ﬁrm, but not extreme amount of

pressure, to assure the accuracy of the seating.

Caution: A high degree of cleanliness must be

maintained between all mastering or mating faces

of end rods, extension rods, contact nibs, etc., when

performing adjustments, settings of calibration, in order

to preserve the measurement integrity of the system.

When the line of measurement is not predetermined,

the correct procedure in measuring with the inside

micrometer is to hold the non-micrometer head end in

contact with the piece to be measured. Then use the

micrometer head to sweep the other end of the surface

to be gaged to determine the point for ﬁnal reading.

When the tool is used in a horizontal position, it should

be supported the full length by positioning the collars

in "V" grooves.

In maintaining the micrometer head accuracy, care in

handling and an occasional drop of light instrument

oil on the threads is sufﬁcient. Adjustment for thread

wear is provided in a binding nut which is exposed

by backing off the thimble. Adjustment of individual

rods allow for wear of contact ends. A light coating

of preservative should be kept on the rods when not

in use. Repair of the tool should be undertaken by

qualiﬁed personnel or returned to the factory.

PKG08804-UM128 9

ENGLISH

128 COMBINATION HEAD AND

MASTER USAGE INSTRUCTIONS

The 128 Combination Head and Master is designed

to be used with the 128 End Rods and Extension

Combinations as supplied in the 128 Inside Micrometer

Set. It combines the linear setting ability of a long

range micrometer with the ease of readability of a

precision dial indicator.

To be used, the combination head (indicator and

micrometer assembly) must be set to the exact

size speciﬁed on the setting master. To do so,

the micrometer is set at the 1" (25 mm) setting

(micrometer mid-range) and ﬁrmly locked.

The combination head is now properly placed in the

setting master and the entire assembly placed upright

such that the micrometer measuring end points upward.

The micrometer end of the combination head is now

swept or rocked in two directions (fore and aft as well

as from side to side) and slightly rotated to obtain a

MAXIMUM reading on the dial indicator. See Fig. 1.

The small hand of the indicator should read zero while

the large hand should read either zero, plus or minus

in accordance with the sense and magnitude of the

actual size marked on the setting master.

For example: A master marked 10.0005" (250mm)

should cause the indicator small hand to read zero

while the large hand should read PLUS .0005"

(.01mm). A master marked 9.9995 should cause the

indicator small hand to read zero while the large hand

should read MINUS .0005" (.01mm).

10 PKG08804-UM128

ENGLISH

Should a correction be required, a bezel locking screw

(accessible through a threaded plug in the side of the

housing) may be loosened and the indicator bezeled to

the correct reading.

It should be noted that the end result of the above

adjustment and/or settings is that a reading of zero by

both indicator hands and a 1.000" (25mm) micrometer

setting will correspond to an overall nominal length of

10.000" (250mm) for the 128 Combination Head.

The combination head may now be used with the proper

combination of micrometer setting, end and/or extension

rods to allow a minimum measurement capability of

11.00" (275mm) [with a 2" (50mm) rod] and a maximum

measurement capability of 83.000" (2100mm),

155.000" (3900mm) or 29.000" (7500mm) depending

of the #128 series inside micrometer set in use.

Inhaltsverzeichnis

Sprachen:

Andere Starrett Messgerät Handbücher

Starrett

Starrett 3900 Series Bedienungsanleitung

Starrett

Starrett W798 Bedienungsanleitung

Starrett

Starrett EC799 Bedienungsanleitung

Starrett

Starrett 799A Series Bedienungsanleitung

Starrett

Starrett 749.1 Bedienungsanleitung

Starrett

Starrett UM3202 Bedienungsanleitung

Starrett

Starrett 2900 Series Bedienungsanleitung

Starrett

Starrett W2900-6ME Bedienungsanleitung

Starrett

Starrett 3752 Series Bedienungsanleitung

Starrett

Starrett LMXP-100 Bedienungsanleitung

Starrett

Starrett FORM 966 Bedienungsanleitung

Starrett

Starrett W733.1 Bedienungsanleitung

Starrett

Starrett W2900 Bedienungsanleitung

Starrett

Starrett AV300 Bedienungsanleitung

Starrett

Starrett IQ Bedienungsanleitung

Starrett

Starrett EC799 Bedienungsanleitung

Starrett

Starrett 798 Series Bedienungsanleitung

Starrett

Starrett 5000B Series Bedienungsanleitung

Starrett

Starrett 799A Series Bedienungsanleitung

Starrett

Starrett Electronic IP67 Bedienungsanleitung

Starrett

Starrett 749.1 Bedienungsanleitung

Starrett

Starrett 2900-1 Series Bedienungsanleitung

Starrett

Starrett SR100 Bedienungsanleitung

Starrett

Starrett 2900 Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung