Starrett EC799 Bedienungsanleitung

Trust Is In The Name User Manual

PKG08800- UMEC799

www.calcert.com [email protected]1.800.544.2843 0

PKG08800-UMEC799 3

EC799 ELECTRONIC DIGITAL CALIPER

USER MANUAL

www.calcert.com [email protected]1.800.544.2843 0

4 PKG08800-UMEC799

TABLE OF CONTENTS

Components 5

Characteristics 10

Precautions when Using the Caliper 11

Operating Instructions 12

Installation / Replacement of Battery 14

Output (EC799B Only) 15

Troubleshooting 16

Spanish 17

French 25

Portuguese 33

Chinese 41

German 49

Italian 57

www.calcert.com [email protected]1.800.544.2843 0

PKG08800-UMEC799 5

COMPONENTS

NOTE:The pictures shown are illustrative, the components may vary according to the model.

Obs.: Las ﬁguras aquí presentadas son ilustrativas, los componentes pueden variar

conforme el modelo del instrumento.

NOTA: Les illustrations sont fournies à titre indicatif. Les composants peuvent varier

selon le modèle.

Obs.: As figuras aqui apresentadas são ilustrativas, os componentes podem variar

conforme o modelo do instrumento.

注:上图仅作说明之用,组件可能随型号的不同而有所不同。

HINWEIS: Die Bilder dienen nur der Veranschaulichung; die Komponenten können von

Modell zu Modell unterschiedlich aussehen.

NOTA: Le ﬁgure sono solo a scopo illustrativo, i componenti possono variare a seconda del modello.

Fig. 11A

Fig. 11B

Fig. 10A

Fig. 10B

Fig. 9A

Fig. 9B

Fig. 8A

Fig. 8B

Fig. 7A

Fig. 7B

Fig. 6A

Fig. 6B

Fig. 5A

Fig. 5B

Fig. 4A

Fig. 4B

Fig. 4C

Fig. 3A

Fig. 3B

Fig. 3C

Fig. 3D

Fig. 2

L < D

Fig. 1A

Fig. 1B

Fig. 1C

1110

www.calcert.com [email protected]1.800.544.2843 0

6 PKG08800-UMEC799

COMPONENTS

1. Jaws for external measurement

–Caras para medición externa

–Mâchoires de mesure externe

–Faces para medição externa

–外测量爪

–Außenmaßschenkel

–Ganasce per misurazioni esterne

2. Jaws for internal measurement

–Caras para medición interna

–Mâchoires de mesure interne

–Faces para medição interna

–内测量爪

–Innenmaßschenkel

–Ganasce per misurazioni interne

3. Depth measuring rod

–Asta para medición de profundidad

–Tige de mesure de profondeur

–Haste para medição de profundidade

–深度测量杆

–Tiefenmaß

–Asta di misurazione della profondità

4. Scribing face

–Superﬁcie para trazado

–Traceur

–Superfície para traçagem

–划线面

–Oberseite

–Superﬁcie di tracciatura

5. Slide

–Cursor

–Coulisseau

–Cursor

–游尺

–Schieber

–Scorsoio

www.calcert.com [email protected]1.800.544.2843 0

PKG08800-UMEC799 7

COMPONENTS

12. "Zero" set button (red) / Power

"on/off" button

–Botón volver a cero y enciende/

apaga "cero - on/off"

–Touche de mise à zéro (rouge) /

bouton M/A

–Botão de zeragem e liga/desliga

"zero - on/off"

–清零按钮(红色) / 通电 / 断

电按钮

–Nullungs-Taste (rot) / Ein/Aus-Taste

–Pulsante "zero" (rosso) / pulsante

di alimentazione "on/off"

13. "IN/mm" button

–Botón de conversión pulgada/

milímetro "IN/mm"

–Touche "IN/mm" (pouce/mm)

–Botão de conversão polegada/

milímetro "IN/mm"

–"英寸/毫米" 切换按钮

–IN/mm-Taste

–Pulsante "mm/IN"

14. Data output port (EC799B Series)

–Puerta de salida de datos

(Serie EC799B)

–Port de sortie des données

(Serie EC799B)

–Porta de saída de dados (Serie

EC799B)

–数据输出端口(EC799B 系列)

–Datenausgabeanschluss

(EC799B Serie)

–Porta di uscita dei dati

(Serie EC799B)

6. Graduated scale

–Escala graduada

–Echelle graduée

–Escala graduada

–主尺

–Skala

–Scala graduata

7. LCD display

–Visualizador de cristal líquido

–Afﬁchage ACL

–Mostrador de cristal líquido

–LCD 显示屏

–LCD-Anzeige

–Display LCD

8. Slide locking screw

–Tornillo de ﬁjación del cursor

–Vis de blocage du coulisseau

–Parafuso de ﬁxação do cursor

–游尺锁紧螺钉

–Feststellschraube

–Vite di bloccaggio corsoio

9. Battery cover

–Tapa de la batería

–Couvercle de pile

–Tampa da bateria

–电池盖

–Batteriedeckel

–Coperchio batteria

10. Scribing reference face

–Superﬁcie de referencia para

trazado

–Face de référence du traceur

–Superfície de referência para

traçagem

–划线基准面

–Referenzﬂäche

–Superﬁcie di tracciatura di riferimento

11. Fine adjustment thumb roll

–Rodillo de ajuste ﬁno

–Molette de réglage ﬁn

–Roldana para ajuste ﬁno

–微调滚轮

–Feineinstellungsdaumenrad

–Rotella per l'accostamento ﬁne

www.calcert.com [email protected]1.800.544.2843 0

PKG08800-UMEC799 9

THIS IS A STARRETT USER GUIDE FOR THE

EC799 DIGITAL CALIPER.

ALL SPECIFICATIONS IN THIS DOCUMENT ARE

CORRECT AT TIME OF PRODUCTION AND ARE

SUBJECT TO CHANGE. PLEASE CONTACT STARRETT

FOR FURTHER INFORMATION.

EC799 ELECTRONIC DIGITAL CALIPER

www.calcert.com [email protected]1.800.544.2843 0

10 PKG08800-UMEC799

ENGLISH

CHARACTERISTICS

INCH MILLIMETER RANGE (MM)

Resolution10.0005 0.01 Up to 300 (12")

Accuracy*2±0.001 ±0.02 Up to 100 (4)

±0.001 ±0.03 >100 (4"); Up to 300 (12")

* Meets the accuracy requirements of DIN 862.

1. Resolution: Smallest difference between indications of a displaying device that can

be meaningfully distinguished. For a digital displaying device, this is the change in

the indication when the least signiﬁcant digit changes by one step (VIM).

2. Accuracy: Closeness of the agreement between the result of a measurement and a

true value of the measurand (VIM).

P.S.: VIM - International Metrology Vocabulary.

• Set zero at any position of the slide.

• Automatic on when moving the slide.

• Auto shutdown: 6-7 minutes of non-use.

• Large LCD display with active unit system: millimeter

"mm" or inch "in".

• RS232 port on EC799B Series allows data transmission

thru a connected cable. The Communication Settings

are; 4800 baud, 8 data bits, 1 stop bit and no parity.

• One lithium battery 3V CR2032.

• The display will blink on and off when the battery output

is below 21uA at 2.75V

• ± 0.1V, indicating the battery should be changed.

www.calcert.com [email protected]1.800.544.2843 0

PKG08800-UMEC799 11

ENGLISH

PRECAUTIONS WHEN USING THE CALIPER

• Do not measure a rotating part; it is dangerous and

causes the faces in contact to wear.

• Do not expose the caliper to direct sunlight or

extreme temperatures.

• Do not apply any voltage on any part of the caliper. Any

external voltage may damage the circuitry of the caliper.

• Do not disassemble the caliper.

• Do not move the slide too fast (over 1,5m/s or 60

inches/s), this can cause measurement errors.

• Flashing of digits shows a weak battery and that it must

be replaced.

• Do not wash or immerse the caliper in any liquid.

• For care and maintenance it is important to wipe the caliper

with a lint-free cloth after exposure to moisture.Apply a very

light coat of lubricant on all the mechanical parts. Do not

use aggressive solvents to clean the plastic components.

• Keep the caliper clean and dry.

• Avoid handling the caliper with oily hands.

• Do not store the instrument in areas of extreme temperature.

www.calcert.com [email protected]1.800.544.2843 0

12 PKG08800-UMEC799

ENGLISH

OPERATING INSTRUCTIONS

• Install the battery that comes with the instrument. (See

item "Installation / Replacement of battery").

• If the display is off, a quick push of the "zero - on/off"

button (12) will activate the display. A one-second push

of the same button will also zero the tool at any position

of the slide. A three-second push of the button will shut

the display off.

• To select the measurement unit needed, press the "IN/

mm" button (13). When an RS-232 cable is installed

in the output slot of the EC799B, the in/mm function is

disabled and the button becomes a send button. A one-

second push of this button will also active the display

with no loss of position.

• To move the slide (5) loosen the slide locking screw (8).

Use the thumb roll (11) to move the slide.

• Clean the measuring faces with a lint-free cloth or chamois.

External measurement: close the jaws and press the

"zero" button (12) to reset the display to zero (Fig. 1A). Put

the part to be measured as close as possible to the scale

(6) (Fig. 1B) and adjust the measuring faces (1) to the part

surface (Fig. 1C). Do not apply excessive pressure when

measuring (Fig. 2).

Internal measurement: close the jaws and press the "zero"

button (12) to reset the display to zero (Fig. 3A). Introduce

the internal measuring jaws (2) as deep as possible inside

the part and adjust the measuring faces to the part surface

(Fig. 3B). To obtain the measurement of an internal diameter

see Fig. 3C and to obtain the measurement value inside a

slot see Fig. 3D.

Depth measurement: close the jaws and press the "zero" button

(12) to reset the display to zero (Fig.4A).Keep the depth measuring

rod (3) perpendicularly to the part bottom (Fig. 4B and 4C).

www.calcert.com [email protected]1.800.544.2843 0

Andere Handbücher für EC799

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Starrett Messgerät Handbücher

Starrett

Starrett 749.1 Bedienungsanleitung

Starrett

Starrett 2900 Series Bedienungsanleitung

Starrett

Starrett 5000B Series Bedienungsanleitung

Starrett

Starrett 2900 Series Bedienungsanleitung

Starrett

Starrett LMXP-100 Bedienungsanleitung

Starrett

Starrett 3900 Series Bedienungsanleitung

Starrett

Starrett 436.1 Bedienungsanleitung

Starrett

Starrett Electronic IP67 Bedienungsanleitung

Starrett

Starrett 64381 Bedienungsanleitung

Starrett

Starrett 2900-1 Series Bedienungsanleitung

Starrett

Starrett W733.1 Bedienungsanleitung

Starrett

Starrett 749.1 Bedienungsanleitung

Starrett

Starrett PKG08806-UMDFG Bedienungsanleitung

Starrett

Starrett UM3202 Bedienungsanleitung

Starrett

Starrett 799A Series Bedienungsanleitung

Starrett

Starrett W2900 Bedienungsanleitung

Starrett

Starrett W2900-6ME Bedienungsanleitung

Starrett

Starrett SR100 Bedienungsanleitung

Starrett

Starrett IQ Bedienungsanleitung

Starrett

Starrett 3752 Series Bedienungsanleitung

Starrett

Starrett AV300 Bedienungsanleitung

Starrett

Starrett FORM 966 Bedienungsanleitung

Starrett

Starrett 2900 Series Bedienungsanleitung

Starrett

Starrett W798 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung