Stelpro SHUT1 Series Bedienungsanleitung

INSSHUT1_0316

For further information or to consult this guide online, please visit our website at www.stelpro.com

STELPRO DESIGN INC. | Saint-Bruno-de-Montarville | Quebec | J3V 6L7

Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future

reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.

The following instructions must be adhered to in order to avoid personal and serious injuries, property damages and potentially fatal electric shocks.

Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.

Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).

WARNING

COMMERCIAL AND INDUSTRIAL UNIT HEATER | SHU SERIES

BUilt-in thermostat installation

SHUT1 SERIES

SINGLE POLE THERMOSTAT

1. Remove access cover to control box of heater.

2. Install the thermostat on the bracket. FIG. 1

3. Connect the two black wires supplied with the kit to the thermostat

terminal. FIG. 2

4. Pass the capillary bulb through the bushing and put the plastic

bushing on the hole. FIG. 3

5. Hold the bulb in place with plastic strapping which locks itself on

the hole. FIG. 4

6. Install thermostat bracket on holes provided. Use the screws (2)

provided with the kit. FIG. 5

7. Connect one black wire from the thermostat into the terminal block

C and the other black wire into the terminal block 1, see electrical

diagram. FIG. 6

8. Reinstall access cover to control box.

FIG. 1 FIG. 2

FIG. 4

FIG. 6

FIG. 3

FIG. 5

INSSHUT2_0316

For further information or to consult this guide online, please visit our website at www.stelpro.com

STELPRO DESIGN INC. | Saint-Bruno-de-Montarville | Quebec | J3V 6L7

Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future

reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.

The following instructions must be adhered to in order to avoid personal and serious injuries, property damages and potentially fatal electric shocks.

Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.

Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).

WARNING

COMMERCIAL AND INDUSTRIAL UNIT HEATER | SHU SERIES

BUilt-in thermostat installation

SHUT2 SERIES

DOUBLE POLE THERMOSTAT

1. Remove access cover to the control box of heater

2. Install the thermostat on the bracket. FIG. 1

3. Install the two black wires provided in the kit on the thermostat’s

left side. Install the two red wires provided on the thermostat’s

right side. FIG. 2

4. Pass capillary bulb through the bushing and put the plastic

bushing on the hole. FIG. 3

5. Hold the bulb in place with plastic strapping which locks itself on

the hole. FIG. 4

6. Install thermostat bracket on holes provided. Use the screws (2)

provided with the kit. FIG. 5

7. Connect one black wire from the thermostat to the terminal

block C. FIG. 6

8. Connect the black wire to the red wire of the thermostat by using

an appropriate connector. FIG. 7

9. Connect the other red wire of the thermostat to the terminal block 1,

see electrical diagram. FIG. 8

10. Re-install access cover to the control box of heater.

FIG. 1 FIG. 2

FIG. 4

FIG. 6

FIG. 8

FIG. 3

FIG. 5

FIG. 7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stelpro Thermostat Handbücher

Stelpro

Stelpro True Comfort PS120/240WF Bedienungsanleitung

Stelpro

Stelpro STE302P Bedienungsanleitung

Stelpro

Stelpro Maestro SMT402 Bedienungsanleitung

Stelpro

Stelpro STE403NP Bedienungsanleitung

Stelpro

Stelpro STCNP Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro STE362RNP Bedienungsanleitung

Stelpro

Stelpro STZW402+ Bedienungsanleitung

Stelpro

Stelpro STE241 Bedienungsanleitung

Stelpro

Stelpro STCNP - 5mA Bedienungsanleitung

Stelpro

Stelpro Maestro ASMT402 Bedienungsanleitung

Stelpro

Stelpro STE302R2+ Bedienungsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Stelpro

Stelpro Maestro SMC402 Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro STCP Bedienungsanleitung

Stelpro

Stelpro STE402NP Bedienungsanleitung

Stelpro

Stelpro STE362RNP Bedienungsanleitung

Stelpro

Stelpro STE252NP+ Bedienungsanleitung

Stelpro

Stelpro STZB402 Plus Bedienungsanleitung

Stelpro

Stelpro B2T1 Series Bedienungsanleitung

Stelpro

Stelpro STCNP Bedienungsanleitung

Stelpro

Stelpro STE302NP Bedienungsanleitung

Stelpro

Stelpro 360 comfort D070 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung