Stelpro STCNP Bedienungsanleitung

USER’S GUIDE

STCNP

SINGLE PROGRAMMING ELECTRONIC

THERMOSTAT FOR HEATING FLOORS

For further information or to consult

this guide online, please visit our website

at www.stelpro.com

INSSTCNP15MA0914

(15mA Version)

INSSTCNP15MA0914

WARNING

Before installing and operating this product, the owner

and/or installer must read, understand and follow these

instructions and keep them handy for future reference. If

these instructions are not followed, the warranty will be

considered null and void and the manufacturer deems

no further responsibility for this product. Moreover, the

following instructions must be adhered to in order

to avoid personal injuries or property damages,

serious injuries and potentially fatal electric

shocks. All electric connections must be made by a

qualied electrician, according to the electrical and

building codes effective in your region. Do NOT connect

this product to a supply source other than 120 VAC, 208

VAC or 240 VAC, and do not exceed the specied load

limits. Protect the heating system with the appropriate

circuit breaker or fuse. You must regularly clean dirt

accumulations on or in the thermostat. Do NOT use uid

to clean thermostat air vents. Do not install this thermostat

in a wet location such as a bathroom. The 15mA model is

not made for such an application, as an alternative, please

use the 5mA model.

Note :

When a part of the product specification must be changed to improve

operability or other functions, priority is given to the product specification

itself. In such instances, the instruction manual may not entirely match all

the functions of the actual product.

Therefore, the actual product and packaging, as well as the name and

illustration, may differ from the manual.

The screen/LCD display shown as an example in this manual may be

different from the actual screen/LCD display.

INSSTCNP15MA0914

The STCNP single programming electronic thermostat can be

used to control heating oors with electrical current − with a

resistive load − ranging from 0 A to 16 A at 120/208/240 VAC. It

has an easy user interface. It keeps the temperature of a room

( mode) and a oor ( mode) at a requested set point with

a high degree of accuracy.

Floor Mode (factory setting)

This control method is ideal in areas where you want a hot oor

at any time and when the temperature of the ambient air can be

high without causing discomfort.

Ambient Mode / (you only have to press down the A/F

button to switch from one mode to the other)

This control method is ideal when you want a stable ambient air

temperature (without uctuation). Usually, this mode is used in

large and often occupied rooms where temperature variations

can be uncomfortable. For example, in a kitchen, a living room

or a bedroom.

Some factors cause variations in ambient air temperature. They

include large windows (heat losses or gains due to outside

temperature) and other heat sources such as a central heating

system, a replace, etc. In all these cases, the mode will

ensure a uniform temperature.

This thermostat is not compatible with the following

installations:

• electrical current higher than 16 A with a resistive

load (3840 W @ 240 VAC, 3330 W @ 208 VAC and

1920 W @ 120 VAC);

• inductive load (presence of a contactor or relay); and

• central heating system.

DESCRIPTION

INSSTCNP15MA0914

Parts supplied:

• one (1) thermostat;

• two (2) mounting screws;

• four (4) solderless connectors suitable for copper wires;

• one (1) oor sensor.

Thermostat selection and sensor location

The thermostat must be mounted on a connection box, at

around 1.5 m (5 feet) above the oor level, on a section of the

wall exempt from pipes or air ducts.

Do not install the thermostat in a location where

temperature measurements could be altered. For example:

• close to a window, on an external wall, or close to a door

leading outside;

• exposed directly to the light or heat of the Sun, a lamp, a

replace or any other heat source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney;

• in a location with poor air ow (e.g. behind a door), or with

frequent air drafts (e.g. head of stairs).

To install the sensor, refer to the installation guide of your

heating oor.

Thermostat mounting and connection

1. Cut off power supply on lead wires at the

electrical panel in order to avoid any risk of

electric shock. Ensure that the thermostat will

be installed on a junction box located in an

uninsulated wall.

2. Ensure that the air vents of the thermostat are clean and

clear of any obstructions.

INSTALLATION

INSSTCNP15MA0914

3. Using a screwdriver, loosen the screw retaining the mounting

base and front part of the thermostat. Remove the front part

of the thermostat from the mounting base by tilting it upward.

4. Align and secure the mounting base to the connection box

using the two screws supplied.

5. Route wires coming from the wall through the hole of the

mounting base and make the required connections using

the “Four-wire installation” gure, and using the supplied

solderless connectors. A pair of wires (black) must be

connected to the power source (120-208-240 VAC) and

another pair (yellow) must be connected to the heating

cable (refer to the drawings displayed on the back of the

INSSTCNP15MA0914

thermostat). For connections with aluminum wires, you must

use CO/ALR connectors. Please note that thermostat wires

do not have polarity, meaning that any wire can be connected

to the other. Then, connect the wires of the oor temperature

sensor at the indicated location behind the thermostat.

6. Reinstall the front part of the thermostat on the mounting

base and tighten the screw at the bottom of the unit.

7. Turn on the power.

8. Set the thermostat to the desired setting (see the following

section).

4-WIRE INSTALLATION

INSSTCNP15MA0914

First Start-up

At the rst start-up, the thermostat is initially in the Day and

modes. The temperature is displayed in degrees Celsius

and the standard factory set point adjustment is 25°C. The

maximum oor temperature is limited to 28°C.

Maximum ﬂoor temperature limitation

At any time, the oor temperature (both in and modes)

is maintained at less than 28°C (82°F) in order to avoid

overheating caused by an excessive heating request, which

could damage some materials or be detrimental for health.

Temperature set points

The gures beside the icon indicate the temperature set

TESTA/F

Single

programming

mode

Security mode

Night mode

Day mode

Red Indicator

(EGFPD Test)

EGFPD button

Ambient

temperature

(Ambient mode)

Floor

temperature

(Floor mode)

OPERATION

INSSTCNP15MA0914

points (both in and modes). They can be displayed

in degrees Celsius or Fahrenheit (see “Display in degrees

Celsius/Fahrenheit”).

Out of any adjustment mode, press down the + button to

increase the set point, or the - button to decrease it. Set points

can only be adjusted by increments of 1 degree. To quickly

scroll through the set point values, press and hold down the

button. Both in Manual and Single programming modes, the

mode set points can range between 3 and 35°C and can

only be adjusted by increments of 1°C (from 37 to 95°F; by

increments of 1°F from the Fahrenheit mode). From mode,

the set points can range between 3 and 28°C (from 37 to 82°F).

In Day mode, you can turn off the thermostat by lowering the set

point below 3°C (37°F). The set point value displayed will be --,

and heating system start up will be impossible.

Day mode and Night mode

The thermostat includes a Day mode (Sun) and a Night mode

(Moon), both of them having their own independently adjustable

and recorded set point. When switching from one mode to the

other, the system will automatically use the temperature set

point corresponding to the Day/Night mode selected. The

and temperature are displayed by the gures under the

and icons, and the temperature set points are displayed

by the gures beside the icon, both in degrees Celsius or

Farenheit. The standard factory set point adjustment is 25°C for

the Day/ mode (21°C from the mode), and 22°C for the

Night/ mode (18°C from the mode).

In order to manually switch from one mode to the other,

simultaneously press down the + and - buttons and release

them immediately.

Night mode timer

The Night mode features a timer that automatically returns to

the Day mode after a selectable time period. This timer allows

the temporary use of a temperature set point. The standard

INSSTCNP15MA0914

factory adjustment of the timer is 8 hours. With this adjustment,

the thermostat automatically returns to Day mode 8 hours after

being switched to the Night mode. You can switch from the

mode to the mode without affecting the timer adjustment.

For example, if you want a night temperature lower than the

day temperature, both Day/Night modes set points will rst

have to be set at the desired temperatures. Before bedtime, the

Night mode temperature set point will be activated by switching

manually to the Night mode. The timer is set for the duration of

the night. The thermostat will automatically return to the Day

mode at the end of the night, and the Day mode temperature

set point, which is higher, will become effective at this time.

Night mode timer adjustment procedure

1. First, switch to the Night mode by simultaneously pressing

down the + and - buttons and releasing them immediately.

2. From the Night mode, simultaneously press down the +

and - buttons for more than 3 seconds until the icon starts

to blink, indicating that the adjustment of the Night mode

timer is effective. The gures that replace the mode

temperature indicate the current adjustment of the timer and

‘‘hrs’’ replaces the mode temperature.

3. If needed, adjust the timer by pressing down the + button

to increase the value, or the - button to decrease it. The

adjustment range is from 1 hour to 999 hours. To quickly

scroll through timer values, press and hold down the button.

4. When the adjustment is completed, release the buttons

and wait for 5 seconds to exit the adjustment function. The

thermostat will then return to the Night mode.

N.B. The Night mode timer will be automatically reinitialized

to the latest recorded value when switching from the Day

mode to the Night mode. It is not necessary to readjust the

timer every time you switch to the Night mode. The timer

is also reinitialized when this value is adjusted. Once the

timer has completed its cycle and when the thermostat is

INSSTCNP15MA0914

in the Day mode, you must manually return to the Night

mode. If you want to automatically return to the Night

mode, the Single programming mode must be selected.

Single programming mode

The Single programming mode, which is associated to the Night

mode timer, allows alternating between the Day/Night modes

and the two corresponding set points over a 24-hour period.

Once activated, this mode allows an automatic return to the

Night mode after 24 hours. The Single programming mode

allows you to dene two periods in a single day with different

set points.

For example, if the Single programming mode is activated and

the Night mode timer is set at 8 hours, the thermostat will be

operating in the Night mode for 8 hours at the night temperature

set point. Then, it will return to the Day mode for 16 hours

operating at the day temperature set point. At the end of the

24-hour cycle, the thermostat will return to the Night mode, and

the cycle will start again. The 24-hour cycle starts with the Night

mode as soon as the Single programming mode is activated.

The Single programming mode activation should be made

when you want to return to the Night mode. The normal course

of a cycle in the Single programming mode is as follows:

1- Night mode: activated for the duration of the Night mode

timer cycle. It returns to the Day mode when the timer cycle

is completed.

2- Day mode: activated for the remaining time of the 24-hour

cycle. It returns to the Night mode at the end of the 24-hour

cycle.

Adjustment procedure of the Single programming mode:

1. First, switch to the Night mode by simultaneously pressing

down the + and - buttons and releasing them immediately.

2. From the Night mode, simultaneously press down the + and

- buttons for more than 3 seconds, until the icon starts to

blink, indicating that the adjustment of the Night mode timer

Andere Handbücher für STCNP

Inhaltsverzeichnis

Andere Stelpro Thermostat Handbücher

Stelpro

Stelpro True Comfort PS120/240WF Bedienungsanleitung

Stelpro

Stelpro STE402NP Bedienungsanleitung

Stelpro

Stelpro Maestro SMC402 Bedienungsanleitung

Stelpro

Stelpro Maestro SMC402AD Bedienungsanleitung

Stelpro

Stelpro T12 Series Bedienungsanleitung

Stelpro

Stelpro STE402P Bedienungsanleitung

Stelpro

Stelpro STE241 Bedienungsanleitung

Stelpro

Stelpro STE402P Bedienungsanleitung

Stelpro

Stelpro STZW402+ Bedienungsanleitung

Stelpro

Stelpro STCP Bedienungsanleitung

Stelpro

Stelpro STE302P Bedienungsanleitung

Stelpro

Stelpro ET180 Bedienungsanleitung

Stelpro

Stelpro Maestro ASMT402 Bedienungsanleitung

Stelpro

Stelpro STZW402+ Bedienungsanleitung

Stelpro

Stelpro STE302PA Bedienungsanleitung

Stelpro

Stelpro Allia ASAT402ZB Bedienungsanleitung

Stelpro

Stelpro MAESTRO Bedienungsanleitung

Stelpro

Stelpro STE362RNP Bedienungsanleitung

Stelpro

Stelpro STCPW5 Bedienungsanleitung

Stelpro

Stelpro STE302R2+ Bedienungsanleitung

Stelpro

Stelpro STCNP Bedienungsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Stelpro

Stelpro 360 comfort D070 Bedienungsanleitung

Stelpro

Stelpro STE302NP Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung