STIEBEL ELTRON MINI-E 2-1 Technisches Datenblatt

OPERATION AND INSTALLATION

OPERACIÓN E INSTALACIÓN

UTILISATION ET INSTALLATION

THERMOSTATIC POINT OF USE TANKLESS ELECTRIC WATER HEATER

CALENTADOR DE AGUA ELÉCTRICO SIN TANQUE CON CONTROL TERMOSTÁTICO DE TEMPERATURA

CHAUFFE-EAU INSTANTANÉ THERMOSTATIQUES POUR POINT D’UTILISATION

» MINI-E 2-1

» MINI-E 2.5-1

» MINI-E 3-1

» MINI-E 3.5-1

» MINI-E 4-2

» MINI-E 6-2

Conforms to ANSI/UL Std. 499

Certiﬁed to CAN/CSA Std. E335-1 & E335-2-35

Conforme a ANSI/UL Std. 499

Certiﬁcación con CAN/CSA Std. E335-1 & E335-2-35

Conforme à la norme ANSI/UL Std. 499

Certiﬁé à la norme CAN/CSA Std. E335-1 & E335-2-35

Tested and certiﬁed by WQA to NSF/ANSI372

for lead free compliance.

Probado y certiﬁcado por WQA NSF/ANSI 372 para

el cumplimiento de las regulaciones sin plomo.

Testé et certiﬁé par WQA à la NSF/ANSI 372 pour une

utilisation sans plomb.

2| MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM

TABLE OF CONTENTS

SPECIAL INFORMATION

OPERATION

1. General information ___________________________________________ 3

1.1 Safety instructions__________________________________________________ 4

1.2 Other symbols in this documentation __________________________ 4

2. Safety____________________________________________________________ 5

2.1 Intended use_________________________________________________________ 5

2.2 General safety instructions _______________________________________ 5

3. Register your product _________________________________________ 6

4. Appliance description _________________________________________ 6

5. Adjustment______________________________________________________ 7

6. Cleaning, care and maintenance _____________________________ 7

INSTALLATION

7. Safety____________________________________________________________ 8

7.1 General safety instructions _______________________________________ 8

8. Appliance description _________________________________________ 8

8.1 Standard delivery___________________________________________________ 8

8.2 Optional accessories _______________________________________________ 8

9. Preparations____________________________________________________ 8

10. Installation______________________________________________________ 9

10.1 Installation site______________________________________________________ 9

10.2 Installation options_________________________________________________ 9

10.3 Connecting the power supply ___________________________________11

11. Commissioning ________________________________________________12

11.1 Initial start-up______________________________________________________12

11.2 Appliance handover_______________________________________________12

11.3 Recommissioning__________________________________________________13

11.4 Settings ______________________________________________________________13

12. Shutting down_________________________________________________14

13. Troubleshooting _______________________________________________ 14

14. Maintenance ___________________________________________________ 16

15. Speciﬁcation ___________________________________________________ 17

15.1 Dimensions and connections____________________________________17

15.2 Wiring diagram ____________________________________________________18

15.3 Temperature rise table ___________________________________________19

15.4 Data table ___________________________________________________________20

16. Spare parts list ________________________________________________22

17. Warranty _______________________________________________________23

ENGLISH

WWW.STIEBEL-ELTRON-USA.COM MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS|3

GENERAL INFORMATION

SPECIAL INFORMATION

- Ensure the appliance can be separated from the

power supply by a circuit breaker that disconnects

all poles.

- If the power cable is damaged, it must only be

replaced by a qualiﬁed contractor and the repair

must be authorized by Stiebel Eltron using the

original spare part.

- Secure the appliance as described in the section

“Installation”, pg. 8.

- Observe the maximum permissible pressure

described in section 15.4, “Data table”, pg. 20.

- Drain the appliance as described in the section

“Draining the appliance”, pg. 16.

OPERATION

1. General information

The chapter "Operation" is intended for homeowners, heating

contractors, plumbers and electricians.

The chapter "Installation" is intended for heating contractors, plumb-

ers and electricians only.

Note:

Read these instructions carefully before using the appliance

and retain them for future reference.

Pass on the instructions to a new user if required.

4| MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM

GENERAL INFORMATION

1.1 Safety instructions

1.1.1 Structure of safety instructions

KEYWORD: Type of risk

Here, possible consequences are listed that may result

from failure to observe the safety instructions.

f Steps to prevent the risk are listed.

1.1.2 Symbols, type of risk

Symbol Type of risk

Injury

Electrocution

Burns

1.1.3 Keywords

KEYWORD Meaning

DANGER Failure to observe this information will result in serious

injury or death.

WARNING Failure to observe this information may result in serious

injury or death.

CAUTION Failure to observe this information may result in non-serious

or minor injury.

1.2 Other symbols in this documentation

Note:

Notes are bordered by horizontal lines above and below

the text. General information is identiﬁed by the symbol

shown on the left.

Symbol

Material losses

(appliance damage, consequential losses and environmental

pollution)

Appliance disposal

ENGLISH

WWW.STIEBEL-ELTRON-USA.COM MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS|5

SAFETY

2. Safety

2.1 Intended use

This appliance is intended for residential use. It can be used safely

by untrained persons. The appliance can also be used in a non-res-

idential environment, e.g. in a small business, as long as it is used

in the same way.

This appliance is suitable for heating domestic hot water (DHW)

or for heating preheated water. The appliance is designed for one

hand-washing sink.

Any other use beyond that described shall be deemed inappropriate.

Observation of these instructions and of instructions for any acces-

sories used is also part of the correct use of this appliance.

2.2 General safety instructions

DANGER: Scalding

During operation, the tap can reach temperatures in excess

of 122°F / 50°C. There is a risk of scalding at outlet temper-

atures in excess of 109°F / 43°C.

DANGER: Electrocution

Any damaged power cables must be replaced by a qual-

iﬁed electrician. This prevents potential hazards due to

improper installation.

Material losses:

Protect the appliance and the tap against freezing.

Material losses:

Only use the provided aerator. Prevent scale build-up at

the tap outlets (See chapter 6, “Cleaning, care and main-

tenance”, pg. 7).

6| MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM

3. Register your product

You must register this product within 90 days of

purchase on our web site in order to activate the stan-

dard warranty or to be eligible for the extended warran-

ty. Go to our web site at www.stiebel-eltron-usa.com

and click on “Register Your Product”.

Before beginning the registration process, we suggest that you

gather the necessary information which will be as follows:

Type, Example: Mini-E 6-2 (from the label that is on the unit)

Number listed after “Nr.”

Place of Purchase

Purchase Date

First & Last Name

Email address

Physical Address

Phone Number

Installation Date

IF YOU HAVE ANY QUESTIONS CONCERNING THE REGISTRATION

PROCESS OR WARRANTY OPTIONS, PLEASE CONTACT STIEBEL

ELTRON USA DIRECTLY AT (800)582-8423.

4. Appliance description

This electronically controlled tankless electric water heater main-

tains a constant outlet temperature up to its output limit, regardless

of the inlet temperature.

This appliance has been factory-set to 100°F / 38°C. Once this

temperature has been reached, the main control board automat-

ically maintains this temperature. The output is matched to the set

temperature and prevents this temperature from being exceeded.

The appliance heats the water directly at the draw-off point as soon

as the tap is opened. Short pipe runs ensure that energy and water

losses are minimal.

The DHW output temperature depends on the cold water tempera-

ture, water heater capacity and the ﬂow rate.

The bare wire heating system is suitable for hard and soft water

areas. This heating system has a low susceptibility to scale build-up.

The heating system ensures quick and efﬁcient hot water provided

at the point-of-use.

Your qualiﬁed contractor can adjust the maximum temperature

setting (see 11.4, “Settings”, pg. 13).

You must use the aerator provided with the appliance.

ENGLISH

WWW.STIEBEL-ELTRON-USA.COM MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS|7

ADJUSTMENT

If you have questions regarding the way you plan to use this device,

please call our technical service line at (800)582-8423 (USA and

Canada).

For service outside the U.S. and Canada, please call us at (413)247-

3380. You can also e-mail us at info@stiebel-eltron-usa.com or fax

us at (413)247-3369.

5. Adjustment

The appliance heating system switches on automatically as soon as

you open the tap. The water is heated. The water temperature can

be adjusted at the tap:

Increasing the temperature

f Reduce the ﬂow rate at the tap.

Reducing the temperature

f Open the tap further or add more cold water.

Following an interruption of the water supply

See 11.3, “Recommissioning”, pg. 13.

6. Cleaning, care and maintenance

f Never use abrasive or corrosive cleaning agents. A damp cloth

is sufﬁcient for cleaning the outside of the appliance.

f Check the taps/valves regularly. Lime-scale deposits can be

removed using commercially available descaling agents.

f Have the electrical safety of the appliance periodically checked

by an electrician.

f Regularly descale or replace the provided aerator (See 8.2,

“Optional accessories”, pg. 8).

8| MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM

SAFETY

INSTALLATION

7. Safety

Only a qualiﬁed contractor should carry out installation, commis-

sioning, maintenance and repair of the appliance.

7.1 General safety instructions

We guarantee trouble-free function and operational reliability only

if original accessories and spare parts intended for the appliance

are used.

Material losses:

Observe the max. permissible inlet temperature. Higher

temperatures may damage the appliance. You can limit the

inlet temperature by means of a central thermostatic valve

(See 8.2, “Optional accessories”, pg. 8).

Note:

Observe all applicable national, state & local regulations

codes, and instructions.

8. Appliance description

8.1 Standard delivery

The following are delivered with the appliance:

- Filter screen in the cold water inlet

-Aerator

-Powercable

8.2 Optional accessories

Mini-E TLC - Thermostatic mixing valve

For ASSE 1070-2004 compliance, use optional Mini-E TLC kit available

from Stiebel Eltron.

Visit www.stiebel-eltron-usa.com for more information.

9. Preparations

f Flush the water line thoroughly.

Water installation

A safety valve is not required by Stiebel Eltron, but one may be

required by local plumbing code. Check the codes before installation.

ENGLISH

WWW.STIEBEL-ELTRON-USA.COM MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS|9

INSTALLATION

Note:

Fitting the supplied aerator provides an optimum water

ﬂow.

10. Installation

10.1 Installation site

Do not install in an area that can be exposed to temperatures below

41°F / 5°C.

Ensure access to the opening screws on both sides of the cover so

that they can be easily removed if service is necessary.

The appliance is suitable for an undersink or oversink installation. It

can be installed with water connections at the top or at the bottom.

DANGER: Electrocution

The adjusting screw for setting the temperature is 'live',

and the IP25 protection is only given when the appliance

back panel is ﬁtted.

10.2 Installation options

10.2.1 Typical installation

26_02_05_0093

1 Tee

2 Shut-off valve

10| MINI™-E SERIES TANKLESS ELECTRIC WATER HEATERS WWW.STIEBEL-ELTRON-USA.COM

INSTALLATION

10.2.2 Appliance installation

Note:

f Mount the appliance on the wall.

The wall must have a sufﬁcient load-bearing capacity for

the weight of the device.

26_02_05_0083

1 Undo the cover screws by two turns.

2 Undo the snap fastener using a screwdriver.

3 Remove the appliance cover with the heater towards the front.

26_02_05_0084

1 Knockout for hard-wiring

f Using pliers, break out the knock-out for the power cable in the

appliance cover. Correct the contours with a ﬁle if necessary.

f Use the appliance back panel as a drilling template.

f Secure the appliance back panel to the wall with suitable plugs

and screws.

Andere Handbücher für MINI-E 2-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere STIEBEL ELTRON Boiler Handbücher

STIEBEL ELTRON

STIEBEL ELTRON SN 5 SLI comfort Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DNM 3 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SNU 5 Plus Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON WST-W Kurzanleitung

STIEBEL ELTRON

STIEBEL ELTRON DNM 3 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DHB-E 11 LCD Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON UFP 5 t Si Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON UFP 5 t Si Anleitung zur Verwendung

STIEBEL ELTRON

STIEBEL ELTRON SHC 10 AU Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON DHM 3 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON IM 45 EC Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DHC 3 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SH 30 S Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SHC 2.5 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SBB 300 Trend Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON AQ 35 E-2 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SBB 300 PLUS Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Accelera 300 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DHF 13 C-AU Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DHX 15 Select Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Tempra 12 B Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON SH 10 S Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON DCE 11/13 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON PSH 30 Universal EL Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung