Streetwize SWDAB3 Technisches Datenblatt

Bluetooth DAB/DAB+ Receiver

SWDAB3 Information for use

Intention For Use

Thank you for purchasing this Bluetooth DAB/DAB+

Receiver from Streetwize. This product is intended for

motorists that want to listen to their favourite DAB &

DAB+ radio stations in their vehicle. This device also

comes with Bluetooth connectivity for connecting your

smartphone for answering & rejecting calls hands-free

and playing music stored on your device or via streaming

services such as Spotify, Amazon Prime & YouTube.

Before using this product, we recommend reading all the

information in this document. Please keep this document

for future reference.

Product Elements

1. Streetwize Bluetooth DAB/DAB+ Receiver

2. DAB antenna

3. 3.5mm AUX cable

Headphone

Socket

DAB Antenna

Port

Forward

Backward

Line In

TX/Scan

Scan: Press to scan the full

list of DAB/DAB+ stations

TX: Long press to modulate

the FM frequency

Caller Button

Press: Play/ Pause/ Pick Up/

Hang Up/ Redial

Rotate: Volume +/−

Switch between modes:

DAB/BT/USB/TF

TF/Micro SD

Card Slot

LCD Display

QC 3.0 USB Charging Port

5V/2.4V USB Charge Port USB Flash Drive Port

What Is DAB+?

This in-car receiver receives DAB+ signal.

DAB+ essentially uses the same technology as DAB, however the main difference is

that DAB+ makes more efﬁcient use of the available bandwidth so that it can send

up to three times more data than a standard DAB signal. This allows for a better

audio quality and also allows for more reliable reception.

Set Up & Installation

To operate this DAB adaptor, you will need to securely ﬁt the antenna

onto your vehicle’s windscreen, and then connect the antenna to the DAB

adaptor via anthenna jack. Please follow the instructions below:

1. Remove the product from its packaging and dispose of the packaging

in the correct manner.

2. Open the driver side door of your vehicle and carefully remove the

interior panel from the right-hand frame of the windscreen. This

will reveal a metal pillar. Important: Please refer to your vehicle’s

handbook for safe and proper removal of the internal panel.

3. With the antenna, carefully remove the protective paper from both

the clear adhesive ﬁlm and the black adhesive ﬁlm. Discard both

protective papers in the correct manner.

4. Then attach the black adhesive ﬁlm to the metal pillar and the

transparent ﬁlm onto the windscreen. Please ensure that you attach

the antenna properly so that you can reinstall the panel later.

5. Thread the antenna’s wiring along the metal pillar, towards the bottom

and allow the connector-end of the wire to rest on your vehicle’s

dashboard. Ensure you have enough wire to connect the DAB adaptor

when mounted on either the dashboard or air vent mount.

Important: Be careful not to overstretch the wire when doing so.

6. Reinstall the panel back. Important: Please refer to the vehicle

handbook for safe and proper installation.

7. Mount the antenna to either the air vent or dashboard (see Mounting

The DAB adaptor).

8. Connect the antenna to the DAB adaptor.

9. Plug in the DAB adaptor to your vehicle’s 12V socket and switch on

your vehicle to turn on the DAB adaptor.

see diagram overleaf

Set Up & Installation

Using the Adaptor

Setting FM Frequency To Link The DAB Adaptor

Recording Footage

1. With the DAB adaptor switched on, press & hold the TX SCAN button

for the adaptor to prompt you to set the FM frequency to link the

adaptor to your vehicle’s FM stereo.

2. Press either or to set your desired frequency. Long pressing

/ will change the frequency quickly, short press will change

the frequency slowly. You can also rotate the knob to change the

frequency.

3. You can set the frequency anywhere from 87.5MHz to 108MHz.

Important: When selecting your frequency, please ensure that your

chosen frequency is empty.

4. Then, switch on the vehicle’s FM stereo and adjust the radio’s

frequency so that it matches the FM frequency that you’ve set in your

DAB adaptor.

Scanning/Listening to DAB/DAB+ Radio Stations

To scan and listen to DAB radio stations, please follow the instructions:

1. Press the Mode button until you enter DAB mode.

2. To seach for DAB/DAB+ stations, press the TX SCAN button and the

adaptor will start to scan DAB/DAB+ stations.

3. Once the DAB scan has been complete, you can select your channel

by pressing either or

4. You can adjust the volume by rotating the knob.

Connecting Your Smartphone to the

DAB Adaptor Via Bluetooth

To link your smartphone or tablet device to the DAB adaptor via

Bluetooth, please follow the instructions below:

1. On the adaptor, press the Mode button until you have entered

Bluetooth mode.

2. To connect your smartphone/tablet to the adaptor, please make sure

your Bluetooth is enabled on your smartphone/tablet device.

3. Then, on your smartphone/tablet, search for ‘DAB-G21’ when

searching for nearby Bluetooth devices. Select ‘DAB-G21’ to pair your

device with the adaptor.

4. The adaptor will sound a conﬁrmation tone and the LCD display will

show ‘Bluetooth Connected’.

Playing Music From Your Phone/Tablet

Once your device is connected to the adaptor via Bluetooth, you are able

to play music from your smartphone to your vehicle’s stereo system.

You can play music stored on your device or you can play music from

streaming services such as Spotify, Amazon Prime & YouTube.

When playing music from your device you can press to play or pause

the audio track. And you can skip/change tracks by pressing either

or . Plus, you can adjust the volume by rotating the knob.

Handsfree Calling

When your phone is connected via Bluetooth, you can answer, reject,

hang up and redial the last call via the adaptor.

Please see Table 1 for instructions:

TF (Micro SD) Card/USB Flash Drive Mode

You can also play music stored on a TF card (Micro SD card) or a USB

ﬂash drive. To do so, please follow the instructions below:

1. Insert either your Micro SD card or USB Flash Drive into the

designated slot.

2. On the DAB adaptor, press the Mode button until you’ve entered either

TF or USB mode.

3. To play/pause music, press .

To change track press either or

4. You can adjust the volume by rotating the knob.

AUX Input

With the supplied 3.5mm AUX cable, connect one end of the cable to

the AUX input port and the other end of your audio device (i.e. portable

MP3 player).

When a connection via AUX has been made, you will see the “AUX IN”

appear on the LCD display.

PLEASE NOTE: You can only play/pause music and change tracks via the audio

device. You can’t change tracks or play/pause via the DAB adaptor itself.

Action Command

Answer incoming call Short press

Hang up current call Short press during call

Reject incoming call Long press

Redial last call Double press

Charging Devices Via 12V USB Charge Ports

This product comes with two USB charge ports that each provides a

different ampage. The USB charge port located on the adaptor provides

a 5V 2.4A charge and the USB charge port on the 12V plug provides a

QC 3.0A charge.

These USB charge ports are suitable for charging your smartphone,

tablet or any other portable USB device.

To charge a device, connect the DAB adaptor’s plug into your vehicle’s

12V socket. Switch on your vehicle and then connect your device via the

USB ports to commence charge.

Technical Support & Spare Parts

If you require any technical support or spare parts for your product within

the warranty period, please contact us on:

suppor[email protected]

and provide the product name and supplier code (see Technical

Speciﬁcations) along with the technical query and proof of purchase.

Product name Streetwize Bluetooth DAB/DAB+ Receiver

Supplier code SWDAB3

Rated working voltage 12V

Radio Digital DAB/DAB+

Max Charge Out 5V/3.0A

Voltage Input 9V to 26V

Working temperature -10 to 70oC

Music format MP3

TF card compatibility Up to 32Gb

Bluetooth version v4.2

DAB Frequency 174MHz to 240MHz

Auto power-off memory Yes

FM Frequency 87.5MHz to 108MHs

Emission Distance 0.5m to 2m

Bluetooth Emission Distance <10m

SNR 90dB

Left & Right Channel

Separation

>80dB

Working Humidity 0~95%

Main body 88mm (L) x 60mm (W) x 18.6mm (H)

Neck Length 90mm

3.5mm AUX cable length 54mm

DAB antenna (dims) 48.4mm (L) x 28.4mm (W) x 9mm (H)

DAB antenna cable length 300mm

Technical Speciﬁcations

Product Dimension

Streetwize: Ashburton Road West,

Trafford Park, Manchester, M17 1RY

For product support:

E: suppor[email protected]

T: +44 (0)161 447 8597

For trade enquiries:

E: [email protected]

T: +44 (0)161 447 8580

www.streetwizeaccessories.com

EU Registered address: Ace Supply Co (Europe) Ltd.

25 Herbert Place, Dublin 2, D02 A098, Republic of Ireland

Inhaltsverzeichnis

Andere Streetwize Empfänger Handbücher

Streetwize

Streetwize SWDAB1 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung