Stryker LUCAS 3 Bedienungsanleitung

Implementation Guide

LUCAS®3

Chest Compression System, v3.1

The LUCAS®3 device, version 3.1 with

wireless connectivity to the LIFENET®

System, allows for device configuration,

post-event reporting and asset management.

This Implementation Guide provides a

comprehensive step by step instruction

on how to configure the LUCAS device for

Wi-Fi, assign setup options and define e-mail

addresses to receive reports and notfications.

Contents

Step 1: LIFENET user account ........................................................................ 1

Step 2: Dening LUCAS device setup options.............................................. 1

Step 3: Conguring the LUCAS device for Wi-Fi .......................................... 4

Step 4: Checking in LUCAS to LIFENET....................................................... 11

Step 5: Assigning new setup options........................................................... 12

Step 6: LUCAS Post-Event Report................................................................. 14

Step 7: LIFENET Asset notications ........................................................... 15

Page 1

Step 1: LIFENET user account

The e-mail address associated with the LUCAS Device Administrator provided with the

LUCAS device purchase will receive a user account e-mail from the LIFENET System.

• Click the link in the e-mail to get started. At rst login you will change

your password.

NOTE: If you cannot locate this e-mail, search your inbox or junk/trash folders for

“LIFENET System: Your account was created”.

NOTE: If your facility or agency already has an existing LIFENET Account proceed to STEP 2.

Step 2: Dening LUCAS device setup options

Your LUCAS device is delivered with factory default settings.* If you do NOT want to

change any of the factory default settings of your LUCAS device, proceed to STEP 3.

If you want to change the default settings, this should be done only under the direction

of a physician who is knowledgeable in CPR and familiar with CPR literature.*

• On your LIFENET account home page, click on “Setup Options”.

NOTE: If you cannot see “LUCAS 3 - 3.1 - Default Prole”, your LIFENET account has not been

updated for LUCAS capabilities. Please contact your local sales representative.

• On the right side under “Actions”, click on the symbol for “Edit Setup Options”.

Setup Options

Edit Setup Options

*LUCAS factory default settings are consistent with 2015 AHA and ERC guidelines for CPR. Please refer to the LUCAS 3, v3.1 Instructions for

Use 101034-00, chapter 9, for a complete description. Use the “LUCAS 3, v3.1 Dening setup options GDR 3336793” yer to get an overview

and to help dene the setup options. Both materials are available at www.physio-control.com/LUCAS.

Back to contents

Page 2

• Follow on-screen steps to change your LUCAS device Setup Options

using the drop down menus.

NOTE: The LUCAS device is delivered with factory default settings and the existing name for

this setup options prole is ”LUCAS 3 – 3.1 – Default Prole”. You can change the setup

options prole name in navigation step 1 (see above image).

• Hover over the elds for additional information.

NOTE: LUCAS factory default settings are in bold.

• You may need to scroll

the drop down menu

to see all setup options.

Back to contents

Page 3

• If you have not yet registered any LUCAS 3, v3.1 device on your

LIFENET account the navigation step 8 “Assign to Devices” will be

empty. Skip this step, and continue to step 9 “Summary”. Review your

setups, then check the box “Assign as default prole to new devices” if

you want to make these settings default for all new LUCAS devices that

are registered to your account. This means the created Setup Options

prole will automatically be applied to all newly enrolled LUCAS 3 devices.

• If you have already registered LUCAS device/s on your LIFENET account,

they will appear in a list in step 8 “Assign to Devices”. Check which devices

you want the new setup options to be applied to, and continue to step 9

“Summary”. Review your setups, then check the box “Assign as default

prole to new devices” if you want to make these settings default for all

new LUCAS devices that are registered to your account. This means the

created Setup Options prole will automatically be applied to all newly

enrolled LUCAS 3 devices.

• You may print out the summary of your device Setup Options for reference.

Assign devices Print

Back to contents

Page 4

Step 3: Conguring the LUCAS device for Wi-Fi

The LUCAS device has Bluetooth®turned on as the factory default. A few steps

are required to congure and enable LUCAS Wi-Fi.

To congure the LUCAS device/s for Wi-Fi you will need to have the following:

Your LUCAS 3 v3.1 device/s

Your local Wi-Fi information

–SSID (Wi-Fi name)

–Encryption type (WEP, WPA...)

–The Key (password)

Technical specications:

Wi-Fi conguration tool requirements

–Does not support open (unencrypted) networks

–Must use WPA or WPA2 Wi-Fi security protocols

–Must use TKIP or AES Wi-Fi encryption

–Must use Personal (PSK) or Enterprise (EAP-TLS, TTLS or

PEAPv0/EAP-MSCHAPv2) authentication

–Supports 2.4 GHz Wi-Fi networks only

Workstation/pc requirements

–Bluetooth 2.0+EDR compatible module using Microsoft stack

–Windows® 7 or 10, 64-bit editions

–.NET Framework version 6.4.2 (installed automatically by Wi-Fi

Conguration Tool)

–Outbound port 443 open for TCP/IP communication to our server

• On your LIFENET home screen go to “Download Software”.

• Click on “Download” next to the Wi-Fi Conguration Tool.

• Open and run the Wi-Fi Conguration Tool.

Download Software

Back to contents

Page 5

• Use the same credentials that you use to log into your LIFENET account. This

is the LIFENET account on which your LUCAS device/s will be registered and

connect to.

NOTE: If you have several LIFENET accounts – make sure to log in with the credentials for the

relevant LUCAS LIFENET account.

NOTE: You can only register each individual LUCAS device on one LIFENET account. LUCAS

can only check in on one LIFENET account. If you have registered LUCAS on the

incorrect account, delete your LUCAS device from this account (see step 5 for how

to delete a LUCAS device from your account).

First time you run the

Wi-Fi Conguration

Tool. Make sure to

select your country.

Back to contents

Page 6

• Follow the instructions on the screen to connect LUCAS to a PC

using Bluetooth.

After a while you should see the serial number of your LUCAS 3, v3.1 device appearing

on your Wi-Fi Conguration Tool screen.

NOTE: This may take up to 2 minutes.

The Bluetooth LED

on the LUCAS user

interface should

start blinking (means

it is searching for

Bluetooth connection).

Back to contents

Page 7

• Select the serial number of the LUCAS device you want to connect

and click ”Next”.

Troubleshooting

If no LUCAS device/s is/are detected;

1. Ensure that the Bluetooth LED on LUCAS user interface is blinking, if

not, go back to previous step to initiate the LUCAS Bluetooth connection.

2. Make sure your PC Bluetooth is ON and discoverable.

3. Make sure you are using the Microsoft Bluetooth driver and you have

the latest installed.

4. If the above doesn’t work, try with a Bluetooth USB dongle.

When you have established Bluetooth connection between your PC and the

LUCAS device you are able to give the LUCAS device a description (i.e. Medic 10

or ED 5). This description must be no longer than 32 characters.

The device description can also be edited within your prole in LIFENET under

”Assets / edit asset” later on.

You can nd the serial

number on the inside

of LUCAS support leg.

Back to contents

Page 8

• Click ”Next”

• Choose a network

Advanced Setup; this is used

for customers who need to set

up enterprise security or when

adding multiple Wi-Fis.

Back to contents

Andere Handbücher für LUCAS 3

Inhaltsverzeichnis

Andere Stryker Medizinische Geräte Handbücher

Stryker

Stryker 1000 Bedienungsanleitung

Stryker

Stryker S3 MEDSURG BED Bedienungsanleitung

Stryker

Stryker Sidne Gebrauchsanweisung

Stryker

Stryker EPIC II 2031 Bedienungsanleitung

Stryker

Stryker FL23SE Bedienungsanleitung

Stryker

Stryker cub Bedienungsanleitung

Stryker

Stryker 1115 Bedienungsanleitung

Stryker

Stryker GOBED FL17E Bedienungsanleitung

Stryker

Stryker L10 Gebrauchs- und Pflegehandbuch

Stryker

Stryker XPRT 2950 Series Handbuch

Stryker

Stryker Renaissance 1066 Bedienungsanleitung

Stryker

Stryker FIRSTCARE 5012 Bedienungsanleitung

Stryker

Stryker Isolibrium PE Bedienungsanleitung

Stryker

Stryker 6100 Rugged M1 Handbuch

Stryker

Stryker Power-PRO XT 6500 Bedienungsanleitung

Stryker

Stryker SDC3 Bedienungsanleitung

Stryker

Stryker Gynnie OB-GYN 1061 Bedienungsanleitung

Stryker

Stryker Neptune 2 Bedienungsanleitung

Stryker

Stryker Gynnie 1061 Bedienungsanleitung

Stryker

Stryker MX-PRO R3 Handbuch

Stryker

Stryker Neptune 2 ROVER ULTRA Bedienungsanleitung

Stryker

Stryker Advantage 1001 Bedienungsanleitung

Stryker

Stryker TPS 5100-9 Bedienungsanleitung

Stryker

Stryker nGenius Universal Tracker Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung

Romet

Romet R210 Bedienungsanleitung