Sunny Health & Fitness SF-B1918 Bedienungsanleitung

INDOOR CYCLING BIKE WITH

MAGNETIC RESISTANCE

SF-B1918

USER MANUAL

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your

satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED

US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment

correctly. It is important to read this entire manual before assembling and using the equipment. Safe

and effective use can only be achieved if the equipment is assembled, maintained, and used properly.

It is your responsibility to ensure that all users of the equipment are informed of all warnings and

precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have

any medical or physical conditions that could put your health and safety at risk or prevent you from

using the equipment properly. Your physician’s advice is essential if you are taking medication that

affects your heart rate, blood pressure, or cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop

exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular

heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do

experience any of these conditions, you should consult your physician before continuing with your

exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult use only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To

ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the

equipment can only be maintained if it is regularly examined for damage and/or wear and tear.

6. Always use the equipment as indicated. If you find any defective components while assembling or

checking the equipment, or if you hear any unusual noises coming from the equipment during

exercise, discontinue use of the equipment immediately and do not use until the problem has been

rectified.

7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become

entangled in the equipment.

8. Do not place fingers or objects into the moving parts of the equipment.

9. The maximum weight capacity of this unit is 220 pounds (100 KG).

10.The equipment is not suitable for therapeutic use.

11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are

required.

12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme

cold, hot or damp areas as this may lead to corrosion and other related problems.

13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

EXPLODED DIAGRAM

HARDWARE PACKAGE

#54 6＃(86X35) 1pc

#80 δ3 (151X43.5) 1pc

#81 S=13,14,15 1pc

PARTS LIST

No.

Description

Spec.

QTY.

No.

Description

Spec.

QTY.

Main Frame

Spacer

Ф25*Ф20.05*11.5

Rear Stabilizer

Fixing Nut

Ф28*M20*1

Seat Post

Middle Axle

Cover

Ф56*28

Front Post

Lock Nut

GB/T 889.1-2000

M10

Handlebar

Lock Nut

GB/T 889.1-2000 M8

Seat Slider

Nut

20*20*t8(M10)

Adjustment Knob

Ф58*33 (M10)

Spring

Φ2.0*52

Flat Washer

Ф19*Ф9*t2

Square Plastic

20.6*20.6*16

Adjustment Knob

Ф38*66 M16*1.5

Plastic plug

25*25*27

Seat

PVC98-2

Tension Control

Knob

M10*100

Bracket

LTF8163

Magnet Holder

Plastic Plug

Ф14*14

Brake Rod

Tablet Bracket

100*60/δ5

Bushing

Ф16*Ф12.1*30

Bushing

Bolt

GB/T 70.1-2000

M6*30

Foot Pad

Ф38*43

Flat Washer

GB/T 95-2002 Ф6

End Cap

Lock Nut

GB/T 889.1-2000 M6

Lock Nut

GB/T 889.1-2000 M8

Connecting Rod

16*16*47

(M10x1.0)

Limit Block

Spring

Ф15.5*Ф1.5*15

Metal Plate

δ2.5

Hexagon Nut

GB/T 6173-2000

M10*1.0

Hexagon Nut

M12*1.25

Computer

TZ-4117

Screw

ST2.9*9.5

Arc Washer

Ф8

Belt

5PK 53in

Spring Washer

GB/T 859-1987 Ф8

Bolt

M8*10

Bolt

GB/T 70.2-2000

M8*15

Flat Washer

GB/T 95-2002 Ф8

Transportation

Wheel

Ф23*32

Dome Nut

GB/T 802-1988

M12*1.25

Allen Wrench

6#(86*35)

Hexagon Nut

GB/T 41-2000 M8

Bolt

GB/T 5780-2000

M6*45

Bolt

GB/T 70.1-2000

M8*45

Front Stabilizer

Bearing

6004ZZ

Bolt

GB/T 70.2-2000

M8*40

Spacer

Ф25*Ф20.5*41.1

Cap

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

✓The model number (found on cover of manual)

✓The product name (found on cover of manual)

✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front

of the manual)

Please contact us at [email protected] or 1- 877 - 90SUNNY (877-907-8669).

No.

Description

Spec

QTY.

No.

Description

Spec.

QTY.

Cap

Ф22*12

Foam Grip

Ф23*Ф29*465

Lock Nut

GB/T 889.1-2000

End Cap

Outer Belt Cover

655*268*43

Universal Wrench

δ3(151*43.5)

Inner Belt Cover

467*266*11

Crosshead

Spanner

S=13,14,15

Screw

GB/T 845-1985

ST4.2*19

Screw

GB/845-85

ST4.2*9.5

Screw

GB/T 845-1985

ST4.8*13

Flat Washer

GB/T 95-2002 Ф5

Screw

GB/T15856.1-2002

ST4.2*16

Right Nylon Nut

9/16"

Middle Axle

Ф20*168

Left Nylon Nut

9/16"-LH

Belt Wheel

Ф200*24

Right Crank

Hex Flange Nut

GB/T 6177.2-2000

M10*1.25

Left Crank

Crank Cap

Ф23*7.5

88L/

Pedal

9/16"

Bolt

GB/T 70.3-2000

M8*18

Magnet

C-02Z

Flat Washer

Ф14*Ф6*t2.5

Magnet

30*15*10

Bearing

6001ZZ

Hexagon Nut

GB/T 41-2000 M8

Flywheel Spindle

Ф16*Ф12*156

Sensor Wire

L=600

Flywheel

Sensor Wire

L=600

Idle Pulley Bracket

Bushing

Ф16*Ф12.1*55.1

Idle Pulley

Φ43*Φ34*24

Screw

GB/T 5780-2000

M5*14

Bolt

GB/T 70.1-2000

M6*10

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1- 877 - 90SUNNY (877-

907-8669).

STEP 1:

Remove 4 Flat Washers (No. 24) and 4 Bolts (No.

57)from Front Stabilizer (No. 56) and Rear

Stabilizer (No. 2) with Allen Wrench (No. 54).

Attach the Front Stabilizer (No. 56)and Rear

Stabilizer (No. 2) to the Main Frame (No. 1) using

4 Flat Washers (No. 24) and 4 Bolts (No. 57) that

were removed. Tighten and secure with Allen

Wrench (No. 54).

STEP 2:

Loosen and pull out the Adjustment Knob (No.

9) and insert the Seat Post (No. 3) into the seat

post tube of the Main Frame (No. 1). Then, select

the desired height. Release the knob and re-

tighten the knob.

Remove Adjustment Knob (No. 7) from Seat

Slider (No. 6) by hand. Then attach Seat Slider

(No. 6) onto Seat Post (No. 3). Reattach

Adjustment Knob (No. 7) that was removed,

then tighten it to secure the Seat Slider (No. 6)

Remove 3 Lock Nuts (No. 17) and 3 Flat

Washers (No. 8) from the back of Seat (No. 10)

with Crosshead Spanner (No. 81).

Attach the Seat (No. 10)onto Seat Slider (No. 6)

with 3 Lock Nuts (No. 17)and 3 Flat Washers

(No. 8) that were removed. Tighten and secure

with Crosshead Spanner (No. 81).

#57 M8*40 4pcs

#24 GB/T 95-2002 φ8 4pcs

#54 6＃(86X35) 1pc

#7 φ58*33(M10) 1pc

#81 S=13,14,15 1pc

#17 GB/T 889.1-2000 M8 3pcs

#8 φ19*φ9*t2 3pcs

#52 GB/T 70.2-2000 M8*15 8pcs

#24 GB/T 95-2002 φ8 6pcs

#54 6＃(86X35) 1pc

#51 GB/T 859-1987 φ8 4pcs

#50 φ8 2pcs #80 δ3 (151X43.5) 1pc

#81 S=13,14,15 1pc

#57 M8*40 4pcs

#24 GB/T 95-2002 φ8 4pcs

#54 6＃(86X35) 1pc

#7 φ58*33(M10) 1pc

#81 S=13,14,15 1pc

#17 GB/T 889.1-2000 M8 3pcs

#8 φ19*φ9*t2 3pcs

#52 GB/T 70.2-2000 M8*15 8pcs

#24 GB/T 95-2002 φ8 6pcs

#54 6＃(86X35) 1pc

#51 GB/T 859-1987 φ8 4pcs

#50 φ8 2pcs #80 δ3 (151X43.5) 1pc

#81 S=13,14,15 1pc

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1- 877 - 90SUNNY (877-

907-8669).

STEP 3:

Connect the bottom end of Sensor Wire (No. 92)

and Sensor Wire (No. 93).

Remove 4 Bolts (No. 52), 2 Arc Washers (No.

50)and 2 Flat Washers (No. 24) from the bottom

end of Front Post (No. 4) using Allen Wrench

(No. 54).

Then, attach Front Post (No. 4) to Main Frame

(No. 1) with 4 Bolts (No. 52), 2 Arc Washers

(No. 50), and 2 Flat Washers (No. 24) that were

removed. Tighten and secure using Allen

Wrench (No. 54).

Remove 4 Bolts (No. 52), 4 Spring Washers

(No. 51), and 4 Flat Washers (No. 24) from the

top end of Front Post (No. 4) using Allen

Wrench (No. 54).

Attach Handlebar (No. 5), Tablet Bracket (No.

13)

onto Front Post (No. 4) with 4 Bolts (No. 52), 4

Spring Washers (No. 51)and 4 Flat Washers

(No. 24) that were removed. Tighten and secure

using Allen Wrench (No. 54).

Attach Computer (No. 49) onto Handlebar (No.

5), then connect the link wire of Computer (No.

49) and Sensor Wire (No. 92).

#52 GB/T 70.2-2000 M8*15 8pcs

#24 GB/T 95-2002 φ8 6pcs

#54 6＃(86X35) 1pc

#51 GB/T 859-1987 φ8 4pcs

#50 φ8 2pcs

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at [email protected] or 1- 877 - 90SUNNY (877-

907-8669).

STEP 4:

Note: The Pedals (No. 88L & No. 88R) are marked

"L" and "R" for Left and Right.

WARNING! Read instructions carefully as

improper assembly may cause permanent damage

to your bike.

Remove the 2 Right & Left Nylon Nuts (No. 84 &

No. 85)located on the Pedals (No. 88R & No. 88L)

with Universal Wrench (No. 80).

Turn the Tension Control Knob (No. 39)

clockwise as tightly as you can with your hand.

Align the Left Pedal (No. 88L) with the Left Crank

(No. 87) at 90°. Turn the pedal bolt on Left Pedal

(No. 88L) counter-clockwise as tightly as you can

with your hand. Then, use Crosshead Spanner

(No. 81) to tighten and secure.

Turn the Left Nylon Nut (No. 85) clockwise as

tightly as you can with your hand. Use Crosshead

Spanner (No. 81) to hold the pedal bolt on Left

Pedal (No. 88L) and use Universal Wrench (No.

80) to turn the Left Nylon Nut (No. 85) clockwise

at the same time, until it is tightened onto the Left

Crank (No. 87).

Align the Right Pedal (No. 88R) with the Right

Crank (No. 86) at 90°. Turn the pedal bolt on Right

Pedal (No. 88R) clockwise as tightly as you can

with your hand. Then, use Crosshead Spanner

(No. 81) to tighten and secure.

Turn the Right Nylon Nut (No. 84) counter-

clockwise as tightly as you can with your hand. Use

Crosshead Spanner (No. 81) to hold pedal bolt on

Right Pedal (No. 88R) and use Universal Wrench

(No. 80) to turn the Right Nylon Nut (No. 84)

counter-clockwise until it is tightened onto the

Right Crank (No. 86).

The assembly is complete!

#80 δ3 (151X43.5) 1pc

#81 S=13,14,15 1pc

#85 9/16"-LH 1pc

#84 9/16" 1pc

BATTERY INSTALLATION AND REPLACEMENT

Battery Cover

Battery

BATTERY INSTALLATION:

1. Take out 2 AAA batteries from computer box.

2. Press the buckle of battery cover on the back of the Computer (No. 49), then remove battery

cover.

3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 49). Pay attention

to the battery + and –ends before installing.

4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer

(No. 49).

The installation is complete!

BATTERY REPLACEMENT:

1. Press the buckle of battery cover on the back of the Computer (No. 49), then remove battery

cover.

2. Remove the 2 old AAAbatteries in the battery case and install 2new AAA batteries into thebattery

case on the back of the Computer (No. 49). Pay attention to the battery + and –ends before

installing.

3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer

(No. 49).

The replacement is complete!

NOTE: Always change both batteries at the same time. Do not mix battery types and do not mix old

and new batteries. Dispose of batteries according to your state and regional guidelines.

ADJUSTMENTS GUIDE

ADJUSTING THE BALANCE

In order to achieve a smooth and comfortable ride, you must ensure

that the stability of the bike is secured. If you notice that the bike is

unbalanced, you should adjust the foot pads located beneath the front

and rear stabilizers. To do so, simply rotate the Foot Pad (No. 15)

until the bike becomes level with the floor surface. To raise the foot

pad, turn it counter-clockwise; to lower the foot pad, turn it clockwise.

When you have finished adjusting the foot pad, re-tighten the

Hexagon Nut (No. 91) by turning it counter-clockwise using

Crosshead Spanner (No. 81). If required, repeat this process to

adjust the remaining foot pads.

ADJUSTING THE SEAT

The seat of this bike is fully adjustable as it moves Up, Down, Fore

(forward), Aft (backward).

To adjust the height of the seat post, loosen and pull Adjustment

Knob (No. 9) outward, then raise or lower the seat to the desired

height. Once adjusted, re-insert and tighten the Adjustment Knob

(No. 9) to secure the seat in place.

To adjust the seat back and forth, loosen Adjustment Knob (No. 7),

then slide the seat slider to the desired position. Once positioned,

tighten the Adjustment Knob (No. 7) to secure the seat slider in

place.

ADJUSTING THE TENSION & EMERGENCY STOP

Adjust the tension by rotating the Tension Control Knob (No. 39)

clockwise to increase the resistance. Rotate the Tension Control

Knob (No. 39) counter-clockwise to decrease the resistance.

Push down the Tension Control Knob (No. 39)to enforce brake and

stop the bike immediately.

TRANSPORTING THE BIKE

To move the bike, first stand at the front of the bike so that you’re

directly in front of the handlebar. Firmly grasp and hold each side of

the Handlebar (No. 5), place one foot on the Front Stabilizer (No.

56)and tilt the bike towards you until the transportation wheels on the

Front Stabilizer (No. 56)touch the ground. With the wheels on the

ground, you can transport the bike to the desired location with ease.

NOTE: When moving the bike, always move with caution as

unexpected impact, such as dropping the bike, may cause injury and

affect the bike’s operation.

Inhaltsverzeichnis

Andere Sunny Health & Fitness Heimtrainer Handbücher

Sunny Health & Fitness

Sunny Health & Fitness SF-B020026 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-RB1202 Handbuch

Sunny Health & Fitness

Sunny Health & Fitness SF-B1516 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B122049 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness P8300 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B020029 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B904 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B901B Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-RB4905 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B1423 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness P8200 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B1002 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness P8100 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness EVOLUTION PRO SF-B1714 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness ELITE INTERACTIVE SF-RBE420049 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness P8150 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B1879 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B2956 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B1004 Handbuch

Sunny Health & Fitness

Sunny Health & Fitness SF-B1913 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-RB925 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B0960 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B1509 Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung

KIDSFIT

KIDSFIT Cardio Kids 661 Bedienungsanleitung