Sunny SF-T808M Bedienungsanleitung

MANUAL TREADMILL

SF-T808M

IMPORTANT:

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE TREADMILL

For Customer Service, please contact: support@sunnyhealthfitness.com

Table of Contents

■

Features of the Equipment /

Safety Precautions

■

Parts List

■

Hardware Packing List /

Overview Drawing

■

Assembly Instructions

■

Folding and Moving

■

Running Belt Adjustments

■

Maintenance and Malfunction

■

Operating Instructions

■

Warm Up Exercises

1. Features of the Equipment

This foldable treadmill integrates the functions of running and jogging. Its LCD screen displays

Scan, Time, Speed, Distance, Calories, and Total Distance. This treadmill‘s set up dimensions

are47L x 23.2W x 47.5Hinch and the fold up dimensions are47.5L x 23.2W x 15.5H inch.

Wheels at the base of the treadmill allow for easy movement and relocation.

2. Safety Precautions

Warning: Before beginning exercise, you should consult a physician first in order to

ensure that your body is healthy enough for such activity. Besides a suitable amount of

exercise, it’s very important to insist on exercising daily in order to attain ideal results.

1) This foldable treadmill is home stationary fitness equipment, and also aerobic training

equipment designed to help develop your cardio-vascular function.

2) Before uses ensure that you properly inspect each part of the equipment, if there are any

defective components replace them immediately. Equipment should remain out of use until

repaired.

3) Before attempting any type of use, ensure all parts of the equipment including the nuts and

bolts are properly secure and fastened.

4) To avoid bodily injury as well as damage to the equipment, never place fingers, hands or

clothing on joints of moving parts of the machine.

5) Do not use this equipment one hour prior to or one hour previous to eating.

6) For your safety, as well as comfort please wear suitable clothing, including athletic shoes

during exercise.

7) For your safety handrails should always be held whenever starting or stopping an exercise or

whenever increasing or decreasing speeds.

8) During exercise, if chest pains, nausea, dizziness or shortness of breath occur, you should

stop exercising immediately and consult your physician before continuing any kind of

exercise.

9) The minimum free space required for safety operation is 80×40 inch.

10) The maximum capacity for a user is 250 lbs.

11) When in use, the equipment should always be placed on flat even ground to insure proper

stability.

12) For their safety, both children and pets should be kept away from equipment whenever it is

in use. If children are permitted to use the equipment they should be supervised by an adult

at all times while using the equipment.

13) The treadmill is not suitable for medical purposes.

14) This equipment is designed for indoor and home use only not intended for commercial use.

Warning: Incorrect use or excessive exercise could lead to injuries to the user

and damage to the equipment.

3. Parts List

No.

Description

Qty

No.

Description

Qty

Main frame

Left rail

Left handlebar support

Front wheel

Right handlebar support

End plug

Front handlebar

Buffer cushion

Computer

Anti-slip cloth

Base support

Magnetic sensor

Ball bearing

Sensor

Ball bearing

M8X35 Bolt

Connection bolt M10x55

M6X70 Bolt

Flywheel cover

Sensor wire I

Running deck

M4X16 Screw

Running belt

M3X10 Screw

Ф24×Ф12×2 washer

M8X40 Bolt

M8*30 screw

M10X40 Bolt

Roller’s bearing bracket

M6 X35 Bolt

Right rail

M8 Lock nut

Right end cap

M6 Lock nut

Foot cushion

Ф8 Flat washer

Hole plug

Ф10 Flat washer

Handlebar end plug

Ф8 Arc washer

Left end cap

Ф6 Flat washer

Front end cap

Ф4 Flat washer

Lock knob

Sensor wire II

Hand foam

Ф12 Spring spacer

Roller spacer

Ф12Spring spacer

Front roller axis

Allen wrench (S6)

Front roller

Allen wrench (S5)

Rear roller axis

Lubricant box (for maintenance)

Rear roller

4. Hardware Packing List

5. Overview Drawing

6. Assembly Instructions

Assembly of this treadmill requires two people. Remove all parts from box and place them

down in a clear workable space on the floor, follow the assembly instructions below to properly

assemble the treadmill.

Step 1: Install the Flywheel Cover

Attach the Flywheel cover (10) to the Main frame (1) with two Screws (40) and Flat washers

(51). (See figure 1)

Step 2: Install the Base Support

Attach the Base support (6) to the Left and Right handlebar supports (2, 3) with four Bolts (43).

(See figure2)

Step 3: Install the Main Frame

With help from another person, raise the front part

of Main frame (1). Attach the front part of Main

frame (1) to the Left and Right handlebar supports

(2, 3) using two Connection bolts (9) and two Flat

washers (48). Attach the Lock knob (23) to the

lower hole at the Left handlebar (2) and secure it

to the Main frame (1). Connect the Sensor wire I

(39) from the Right handlebar support (3) to the

Sensor (36) from the Main frame (1). (See figure

Step 4: Install the Front Handlebar

Connect the Sensor wire I (39) from the Right handlebar support (3) to the Sensor wire II (52)

from the Front handlebar (4). (See figure 4a).

Attach the Front handlebar (4) onto the arc plates of Left and Right handlebar supports (2, 3)

with two Bolts (37) and two Arc washers (49). (See figure 4b)

*To place the Front handlebar (4), you will need second party to hold the Left and Right

handlebar supports (2, 3) and push inward in order to align.

Step 5: Install the Computer

Connect the Sensor wire II (52) to the wire that

comes from the Computer (5). Insert the Computer (5)

to the computer plate of Front handlebar (4). (See

figure 5)

Warning: Be sure that you have

properly tightened all bolts before

beginning any kind of exercise.

7. Folding and Moving

Folding: To fold up the treadmill, turn the Lock knob (23) counterclockwise and remove it from

Left handlebar support (2). Raise the rear end of the Main frame (1) all the way up to a vertical

position, then insert the Lock knob (23) to the upper hole of Left handlebar support (2) and

tighten It. (See figure 6a)

Moving: Once you have properly folded and secured the treadmill, hold the handlebars with

your hands, slowly lean the treadmill back towards your body, once the wheels touch the

ground you can safely move the treadmill to your desired location. (See figure 6b)

Warning:

1) When folding or unfolding the equipment always insures that the Lock knob is

inserted correctly, and properly tightened.

2) For their safety, children should be kept away from the equipment, even when

folded.

8. Running Belt Adjustments

Upon the completion of assembly, a trial use should be conducted in order to insure that the

equipment and all functions of the equipment operate correctly. While running, check the

following points:

1) Check if values of the computer display properly or not; please note, to insure that the wire

and the plug are both connected correctly, and that the computer screen has batteries.

2) Check if the running belt turns smoothly or not, and whether the belt deviates or not when

operating. Under normal condition, the running belt should turn freely, keeping its position in the

middle. Because the belt is pre-adjusted by the factory prior to shipping, it may run defectively

after any kind of rude transportation. To make adjustments to correct this possible issue, please

refer to Figure 7.

1) To adjust the tension of the running belt, locate both bolts on the end caps of the main frame,

to avoid deviation to the belt, you must be sure to adjust both bolts at the same time. Turning

both bolts counter clockwise will release the belt, turning them clockwise will tighten the belt.

2) If the running belt deviates to left side, insert the hex end of the screwdriver into the

hexangular hole on the right side of the rear roller, turn 1/2 circle counterclockwise, and try

running again. Please operate conversely if the running belt deviates to right side. If

necessary, repeat this process until the belt runs in the middle, during the operation, keep the

belt in a proper tension state. (See Figure 7)

9. Maintenance and Malfunction

Maintenance

You may feel the resistance of the running belt grow larger after use over a long period of time.

The running belt and the plate require periodic cleaning and lubricating. To maintain optimal

performance of the equipment, user’s normal maintenance is very essential. Please clean and

lubricate the belt and belt plate as indicated in the instructions below;

1) Raise the belt up on one side, apply lubricant (57) to the belt plate, using a rag thoroughly

wipe the lubricant over the belt plate; repeat the same process the other side.

2) Check and tighten bolts in each part of the equipment regularly. The moving parts should

turn freely and quietly, abnormality of moving parts will affect the safety of the equipment.

3) Keep the equipment clean; do not clean the equipment with strong solvent.

4) The running belt is easy to wear out, if you find it worn or broken, you should contact a

technician to replace it. Until the belt is repaired you should not use the equipment.

Malfunction

Reason

Explanation

Base is unstable.

1) The ground is not flat or there is

small object on the ground.

2) The lock knob is not tightened.

1) Remove the objects.

2) Tighten the lock knob.

Noise from the

moving parts.

The magnets are too close.

Open the cover to adjust.

The running belt

deviates when

Operating.

See #8 Running Belt Adjustments.

Andere Handbücher für SF-T808M

Inhaltsverzeichnis

Andere Sunny Tretmühle Handbücher

Sunny

Sunny TreadPad SF-T7970 Bedienungsanleitung

Sunny

Sunny SF-T723007 Bedienungsanleitung

Sunny

Sunny SF-T7971 Bedienungsanleitung

Sunny

Sunny SF-T7514 Bedienungsanleitung

Sunny

Sunny SF-T7610 Bedienungsanleitung

Sunny

Sunny SF-T7515 Bedienungsanleitung

Sunny

Sunny SF-T7512 Bedienungsanleitung

Sunny

Sunny SF-T7603 Bedienungsanleitung

Sunny

Sunny SF-T7718 Bedienungsanleitung

Sunny

Sunny SF-T7857 Bedienungsanleitung

Sunny

Sunny SF-T722021 Bedienungsanleitung

Sunny

Sunny SF-T7946 Bedienungsanleitung

Sunny

Sunny SF-T7971 Bedienungsanleitung

Sunny

Sunny SF-T1407M Bedienungsanleitung

Sunny

Sunny SF-T7917 Bedienungsanleitung

Sunny

Sunny SF-T722022 Bedienungsanleitung

Sunny

Sunny SF-T1408M Bedienungsanleitung

Sunny

Sunny SF-T1409M Bedienungsanleitung

Sunny

Sunny SF-T7604 Installations- und Betriebshandbuch

Sunny

Sunny SF-T1415 Bedienungsanleitung

Sunny

Sunny SF-T1413 Bedienungsanleitung

Sunny

Sunny SF-TD7884 Bedienungsanleitung

Sunny

Sunny SF-T7635 Bedienungsanleitung

Sunny

Sunny SF-T722052 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung