Supermicro SUPERSERVER 8016B-TF Bedienungsanleitung

SUPER

SUPERSERVER

8016B-6F

8016B-TF

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: November 14, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 8016B-

6F/8016B-TF. Installation and maintenance should be performed by experienced

technicians only.

The SuperServer 8016B-6F/8016B-TF is a high-end quad processor server based

on the SC818A-1400B 1U rackmount server chassis and the Super X8QB6-F/

X8QBE-F serverboard. The X8QB6-F/X8QBE-F supports four Intel® Xeon® proces-

sor 7500 Series - please refer to our web site for an up-to-date list of supported

processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8QB6-F/X8QBE-F

serverboard and the SC818A-1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 8016B-

6F/8016B-TF into a rack and check out the server conﬁguration prior to powering

up the system. If your server was ordered without the processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8016B-6F/8016B-TF.

iii

Preface

SUPERSERVER 8016B-6F/8016B-TF User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8QB6-F/X8QBE-F serverboard,

including the locations and functions of connectors, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC818A-1400B 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring Serial ATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 8016B-6F/8016B-TF User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA .............................................................................................................. 1-2

SAS ................................................................................................................1-2

Rear I/O Ports.................................................................................................1-2

ATI Graphics Controller...................................................................................1-3

IPMI.................................................................................................................1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

SAS/SATA Subsystem.....................................................................................1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview............................................................................................................. 2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rails .................................................................................2-4

Installing the Outer Rails.................................................................................2-5

Locking Tabs .............................................................................................. 2-5

vii

Table of Contents

Installing the Server into the Rack.................................................................. 2-6

2-6 Checking the Serverboard Setup.................................................................... 2-7

2-7 Preparing to Power On................................................................................... 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Memory Support..............................................................................................5-8

Notes and Restrictions............................................................................. 5-10

5-7 Adding PCI Add-On Cards............................................................................ 5-10

5-8 Serverboard Details .......................................................................................5-11

viii

SUPERSERVER 8016B-6F/8016B-TF User's Manual

X8QB6-F/X8QBE-F Quick Reference........................................................... 5-12

5-9 Connector Deﬁnitions ...................................................................................5-13

5-10 Jumper Settings............................................................................................ 5-19

5-11 Onboard Indicators........................................................................................5-21

5-12 SAS and SATA Ports.....................................................................................5-23

5-13 Installing Software......................................................................................... 5-24

SuperDoctor III..............................................................................................5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans.................................................................................. 6-3

Removing a Fan......................................................................................... 6-3

Installing a New Fan .................................................................................. 6-3

6-4 Drive Bay Installation...................................................................................... 6-4

Removing the Front Bezel..............................................................................6-4

Accessing the Drive Bays............................................................................... 6-5

SAS/SATA Drive Installation............................................................................ 6-6

Mounting a Drive in a Drive Carrier...........................................................6-6

Installing/Removing SAS/SATA Drives....................................................... 6-7

SAS/SATA Backplane................................................................................. 6-7

DVD-ROM and Floppy Drive Installation........................................................6-8

6-5 Power Supply..................................................................................................6-9

Power Supply Failure...................................................................................... 6-9

Removing the Power Supply...........................................................................6-9

Installing a New Power Supply.......................................................................6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Boot Conﬁguration ........................................................................................ 7-29

7-5 Security Settings........................................................................................... 7-30

7-6 Exit Options...................................................................................................7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The 8016B-6F/8016B-TF is a high-end server comprised of two main subsystems:

the SC818A-1400B 1U server chassis and the X8QB6-F/X8QBE-F serverboard.

Please refer to our web site for information on operating systems that have been

certiﬁed for use with the 8016B-6F/8016B-TF (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have been

included with the SuperServer 8016B-6F/8016B-TF, as listed below:

• Seven 4-cm hot-swap chassis fans (FAN-0101L4)

• One air shroud (MCP-310-81804-0B)

• Four CPU passive heatsinks for 1U chassis (SNK-P0044P)

• One riser card for PCI-Express x16 (RSC-RR1U-E16)

• One slim DVD-ROM dummy drive (CSE-PT93L-B)

• One rail set (MCP-290-00016-0N)

• SATA Accessories

One SATA backplane (BPN-SAS-818A)

One 40-cm iPass to iPass cable (CBL-0108L-02)

Three hot-swap drive carriers (CSE-PT39-B0)

One HDD backplane PWS cable (CBL-0385L)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 8016B-6F/8016B-TF User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 8016B-6F/8016B-TF lies the X8QB6-F/X8QBE-F,

a quad processor serverboard based on the Intel 7500/ICH10R chipset. Below are

the main features of the X8QB6-F/X8QBE-F. (See Figure 1-1 for a block diagram

of the chipset).

Processors

The X8QB6-F/X8QBE-F supports four Intel Xeon MP 7500 Series processors in

LGA1567 sockets. Please refer to the serverboard description pages on our web

site for a complete listing of supported processors (www.supermicro.com).

Memory

The X8QB6-F/X8QBE-F has 32 DIMM slots that can support up to 1024 GB of reg-

istered ECC DDR3-1066/800 SDRAM. Single channel and two-channel interleaved

memory are supported. Modules of the same size and speed should be used. See

Chapter 5 Section 5 for details.

SATA

ASATAcontroller is integrated into the South Bridge (ICH10R) section of the chipset

to provide a six-port SATA subsystem, which is RAID 0, 1 and 5 supported. The

SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

SAS

The 8016B-6F (X8QB6-F) includes an LSI 2108 SAS controller to provide an eight

port SAS subsystem, which is RAID 0, 1 and 5 supported. The SAS drives are

hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SAS drives.

Rear I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, a dedicated

IPMI LAN port and two Gb Ethernet ports.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-821GE-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-WTR Bedienungsanleitung

Supermicro

Supermicro 7047R-72RF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN10P Bedienungsanleitung

Supermicro

Supermicro 8042-6 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 7049GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-4C-FN13TP Bedienungsanleitung

Supermicro

Supermicro SuperServer E200-8D Bedienungsanleitung

Supermicro

Supermicro SuperServer 5037C-i Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-ACR16H Bedienungsanleitung

Supermicro

Supermicro SuperStorage L-Serie Bedienungsanleitung

Supermicro

Supermicro SuperServer 510T-ML Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2025HS-TNR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2124US-TNRP Bedienungsanleitung

Supermicro

Supermicro superserver 5019S-ML Bedienungsanleitung

Supermicro

Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

Supermicro

Supermicro SuperServer 8048B-TRFT Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro 8025C-3R Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-H Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015SV-WTNRT Bedienungsanleitung

Supermicro

Supermicro A+ SERVER 1012C-MRF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung